Irmc Microsd Card; Note For Embedded Lifecycle Management (Elcm); Installing The Irmc Microsd Card - Fujitsu PRIMERGY RX4770 M6 Upgrade And Maintenance Manual

15.5

iRMC microSD card

15.5.1

Note for embedded Lifecycle Management (eLCM)

The iRMC microSD card is necessary for using the embedded Lifecycle
Management (eLCM) functionality of the iRMC. It requires a valid eLCM
license key from user purchase order and activated through the iRMC
web interface.
For more information, see the "ServerView embedded Lifecycle
Management (eLCM)" user guide.
15.5.2

Installing the iRMC microSD card

Upgrade and Repair Unit
(URU)
Tools:
Phillips PH2 / (+) No. 2 screw driver (for cover 2)
Preliminary steps
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ Remove the riser modules, see
▶
"Removing the fan cage" on page
▶
"Removing the air duct 1 (top system board)" on page
▶
"Removing the top system board carrier" on page
▶
"Removing the OCP air duct" on page
RX4770 M6
46.
"Removing a riser module" on page
64.
70.
Upgrade and Maintenance Manual
System board and components
Hardware: 30 minutes
47.
48.
68.
73.
45.
63.
345