HP Six Port Card Installation Instructions

HP Six Port Card
Installation Instructions
© Copyright 2006 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should
be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
May 2006 (Fifth Edition)
Part Number 201651-005
Overview
The HP Six Port Card expands the communications capability
of a UPS so that a single UPS can exchange data with up to
three host computers when HP Power Management software
is installed.
Precautions
See the Important Safety Information guide (included in the
UPS kit) before installing this product.
Save these instructions. This document contains important
safety instructions that should be followed during the
installation of this option card.
WARNING: A risk of personal injury from
electric shock and hazardous energy levels
exists. The installation of options and routine
maintenance and service of this product
must be performed by individuals who are
knowledgeable about the procedures,
precautions, and hazards associated with AC
power products.
NOTE: The rating label on the device provides the
class (A or B) of the equipment. Class B devices have
a Federal Communications Commission (FCC) logo or
FCC ID on the label. Class A devices do not have an
FCC logo or FCC ID on the label. After determining
the class of the device, refer to the user guide for
complete regulatory compliance notices.
Kit contents
•
This document
•
Warranty information
•
Six Port Card
•
Four 3.6-meter (12-foot) serial interface cables
Required tools
No. 2 Phillips screwdriver
Installing the Six Port Card
Install HP Power Manager agents on every server or
1.
workstation protected by the host UPS.
To download the latest software version, see the HP
website (http://www.hp.com/go/rackandpower).
Perform a normal system shutdown on all devices
2.
connected to the host UPS.