Sealey BTR4.V3 Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instructions
1. SAFETY
DO NOT put more than one bottle on the trolley.
8
Always seat the bottle in the upright position.
9
Always secure the bottle tightly to the trolley with the chains provided.
9
Only use the trolley on firm, level, unobstructed surfaces which are capable of supporting the trolley and its load.
9
DO NOT use the trolley on sloping surfaces.
8
DO NOT allow others to ride on the trolley.
8
DO NOT attempt to move the trolley by pulling on the earth or torch cable.
8
DO NOT attach the welder's earth clamp to the metal frame of the trolley as this may result in accidental arcing from the torch.
8
Replace or repair damaged parts. Use only recommended parts. Unauthorised parts may be dangerous and will invalidate the
9
warranty.
Store gas cylinders in a vertical position only and ensure the storage area is correctly secured.
9
DO NOT store gas cylinders in areas where temperature exceeds 50°C. DO NOT use direct heat on a cylinder. Always keep gas
8
cylinders cool.
DO NOT attempt to repair or modify any part of a gas cylinder or valve, and DO NOT puncture or damage a cylinder.
8
DO NOT obscure or remove any official labels from a cylinder. Always check the gas identity before use.
8
DO NOT get gas cylinders oily or greasy.
8
DO NOT try to lift or handle cylinder by its cap, guard or valve. Always keep caps and guards in place and close valve when not in
8
use.
Gas cylinders are heavy, use mechanical lifting equipment.
9
WARNING! Failure to comply with these instructions may result in loss of load, damage to trolley or other property and/or personal
‰
injury.
2. INTRODUcTION
Robust trolley carries portable MIG welder and gas bottle, making relocation of welding equipment quick and easy. Fitted with two fixed
wheels and two castors for excellent manoeuvrability and supplied with bottle retaining chains and cable stowage hooks. Upper tray for MIG
welder and two lower trays for associated items. Suitable for portable MIG welders up to 300mm wide and 480mm long including Model No's
MIGHTYMIG90, MIGHTYMIG100, MIGHTYMIG150* and SUPERMIG140*.
3. SPEcIFIcATION
Model no: .................................................................................................................BTR4.V3
Application(s): .......... MIGHTYMIG100, MIGHTYMIG150*, SUPERMIG130, SUPERMIG140*
note: ............................................................................. *With foot, wheels and axle removed
Maximum Welder Width/Length: .......................................................................... 280/445mm
nett Weight: ............................................................................................................... 11.20Kg
load Capacity ................................................................................................................. 45kg
© Jack Sealey limited
UNIVERSAL TROLLEY FOR PORTABLE MIG
WELDERS
BTR4.V3
Model no:
Original Language Version BTR4.V3 Issue 1 27/11/18