Baby Trend Trooper CV01 Owner's Manual
  1. Manuals
  2. Brands
  3. Baby Trend Manuals
  4. Car Seat
  5. Trooper CV01
  6. Owner's manual

Baby Trend Trooper CV01 Owner's Manual

3-in-1 convertible car seat
Hide thumbs
Table of Contents

Advertisement

Quick Links

Store this manual in the pocket provided
on the underside of the seat cover as
illustrated above.
Baby Trend, Inc.
13048 Valley Blvd.
Fontana CA 92335
www.babytrend.com
1-800-328-7363
(8:00am ~ 4:30pm PST)
www.babytrend.com
WARNING
Carefully read and understand all instructions and warnings in
this manual. Failure to properly use this Car Seat increases the
risk of SERIOUS INJURY or DEATH in a sudden stop or crash.
KEEP INSTRUCTIONS FOR FUTURE USE.
Store this manual in the pocket provided on the underside of
the seat cover as illustrated on back cover of this manual.
Trooper™ 3-in-1 Convertible Car Seat
OWNER'S MANUAL
Para instrucciones en Español, conéctese a
www.babytrend.com o llamar al: 1-800-328-7363.
Copyright © 2021, Baby Trend, Inc.
Scan QR Code
for Trooper
how to videos
CV01
CV01_En_100520
™

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Trooper CV01 and is the answer not in the manual?

Questions and answers

Susie Gill
January 21, 2025

I need to adjust the front shoulder traps

0
1 comments:
Mr. Anderson
February 10, 2025

To adjust the front shoulder straps on the Baby Trend Trooper CV01:

1. Loosen the harness and unfasten the harness end loops from the splitter plate.
2. Pull the harness end loops through the seatback.
3. Thread the harness end loops through the desired shoulder position.
4. Fasten the harness end loop back to the splitter plate, ensuring both sides are threaded in the same position and fully hooked.
5. Pull on the harness tension adjuster to tighten the straps, ensuring there is no slack and the straps do not press on the child’s skin or force the child into an unnatural position.

Always ensure the chest clip is at armpit level.

This answer is automatically generated

0
Susie Gill
January 21, 2025

I need to know how to adjust the shoulder straps up a notch

0
1 comments:
Mr. Anderson
February 10, 2025

To adjust the shoulder straps on the Baby Trend Trooper CV01:

1. Loosen the harness and unfasten the harness end loops from the splitter plate.
2. Pull the harness end loops through the seatback.
3. Thread the harness end loops through the desired shoulder strap position.
4. Fasten the harness end loops back to the splitter plate. Ensure both sides are hooked in the same position and secure.
5. Pull on the harness tension adjuster to tighten the straps. Ensure there is no slack, and the straps do not press on the child's skin or push the child into an unnatural position.

This answer is automatically generated

0

Related Manuals for Baby Trend Trooper CV01

Summary of Contents for Baby Trend Trooper CV01

  • Page 1 Trooper™ 3-in-1 Convertible Car Seat OWNER’S MANUAL Para instrucciones en Español, conéctese a www.babytrend.com o llamar al: 1-800-328-7363. Baby Trend, Inc. 1-800-328-7363 13048 Valley Blvd. (8:00am ~ 4:30pm PST) Fontana CA 92335 www.babytrend.com Copyright © 2021, Baby Trend, Inc. CV01_En_100520...

  • Page 2: Table Of Contents

    5.8 Aircraft Installation............... 35 5.9 Child Placement In The Car Seat ..........36 5.10 Shoulder Height Adjustment............38 5.11 Crotch Buckle Adjustment ............39 ® Scan QR Code for Baby Trend Trooper how to videos. ™ Copyright © 2021, Baby Trend, Inc.

  • Page 3: General Warnings And Information

    • NEVER use this car seat in any vehicle seating position equipped • Use only car seat accessories manufactured by Baby Trend ® . with an active air bag. Read your vehicle’s owners manual to see Accessories can affect your child’s safety in a sudden stop or...

  • Page 4: Use Recommendations

    2.0 Use Recommendations 2.0 Use Recommendations The American Academy of Pediatrics and Baby Trend recommend 2.2 Forward facing seat requirements children remain in a rear-facing car seat for as long as possible, until they reach the highest weight or height allowed by their seat.

  • Page 5: Car Seat Parts

    Cup holder Recline indicator Top Tether Lower Anchor Lower Anchor Storage Storage Forward Facing Belt Path Harness tension adjuster Lower anchor Lower anchor Rear Facing connectors connectors Belt Path Copyright © 2021, Baby Trend, Inc. Copyright © 2021, Baby Trend, Inc.

  • Page 6: Selecting A Vehicle Seating Location

    You are also invited to call Baby Trend at monitor the child. 1-800-328-7363 for additional information or assistance.

  • Page 7: Safe Vehicle Seat Belt Systems

    Copyright © 2021, Baby Trend, Inc. Copyright © 2021, Baby Trend, Inc.
  • Page 8 (Fig. 13c). Once this type of seat belt is fastened, the latch plate prevents the lap belt from loosening. This combination seat belt does not require a Locking Clip. Copyright © 2021, Baby Trend, Inc. Copyright © 2021, Baby Trend, Inc.

  • Page 9: Locking Clip Installation

    Locking Clip is stored under the seat cover of the car instruction manual. seat (Fig. 15a). Contact Baby Trend 1-800-328-7263 These belt systems will not hold the car seat securely in place at all times. In addition, a Locking Clip used with this car seat will NOT make to acquire an approved Locking Clip.

  • Page 10: Preparation For Installation In Vehicle

    (Fig. 17c). 2. Make sure you have selected an acceptable location for the car seat as instructed in Section 4.0 Selecting A Vehicle Seat Location. Fig. 17c Copyright © 2021, Baby Trend, Inc. Copyright © 2021, Baby Trend, Inc.

  • Page 11: Installation With Latch

    NOT all vehicles have the same locations or maximum weight requirements for LATCH! Rear Package Shelf Pick up truck Vehicle with reinforced seats Floor Mounts Lower Anchor Point Locations Copyright © 2021, Baby Trend, Inc. Copyright © 2021, Baby Trend, Inc.

  • Page 12: Installation And Use

    5.0 Installation and Use 5.0 Installation and Use The American Academy of Pediatrics and Baby Trend recommend 5.1 Child Placement in The Car Seat children remain in a rear-facing car seat as long as possible, until they reach the highest weight or height allowed by their seat.

  • Page 13: Installation Diagrams

    NOTE: Remove any twist in webbing to WARNING! ensure the webbing lies flat before securing the car seat to the vehicle. • Never use a Top Tether connector in a rear facing installation!! Fig. 24a Copyright © 2021, Baby Trend, Inc. Copyright © 2021, Baby Trend, Inc.

  • Page 14: Rear Facing Installation With Lap Belt

    (Fig. 26a). NOTE: Remove any twist in webbing to ensure the webbing lies for securing the car seat to the vehicle. Fig. 26a Copyright © 2021, Baby Trend, Inc. Copyright © 2021, Baby Trend, Inc.
  • Page 15 (Fig. 28a). NOTE: Remove any twist in webbing to ensure the webbing lies for securing the car seat to the vehicle. Fig. 28a Copyright © 2021, Baby Trend, Inc. Copyright © 2021, Baby Trend, Inc.

  • Page 16: Forward Facing Installation With Lap/Shoulder Belt And Top Tether

    NOTE: Remove any twist in webbing to ensure the webbing lies for securing the car seat to the vehicle. Center bubble for children 4-22 lbs. CV0107052419 Fig. 29d Fig. 30a Copyright © 2021, Baby Trend, Inc. Copyright © 2021, Baby Trend, Inc.

  • Page 17: Forward Facing Installation With Lap Belt And Top Tether

    1 inch in any direction. If the car seat moves more than 1 inch repeat all steps until all safety steps are met. Fig. 31d Fig. 32a Copyright © 2021, Baby Trend, Inc. Copyright © 2021, Baby Trend, Inc.

  • Page 18: Latch - Forward Facing Installation With Lower Anchor And Top Tether

    1 inch repeat of seat fabric down to expose the forward all steps until all safety steps are met. facing belt path (Fig. 34a). Fig. 34a Fig. 33d Copyright © 2021, Baby Trend, Inc. Copyright © 2021, Baby Trend, Inc.

  • Page 19: Aircraft Installation

    • Rear facing use only. 1. Follow the seat belt installation for use in an Aircraft. 2. Consult your airline for requirements to use the car seat. Fig. 36e Copyright © 2021, Baby Trend, Inc. Copyright © 2021, Baby Trend, Inc.

  • Page 20: Shoulder Height Adjustment

    Tension, push the harness tension adjuster button (Fig. 37d) located underneath the seat fabric and gently pull on the harness straps over the child’s shoulder. Fig. 37d Fig. 38c Copyright © 2021, Baby Trend, Inc. Copyright © 2021, Baby Trend, Inc.

  • Page 21: Crotch Buckle Adjustment

    (Fig. 39b). •Do Not machine wash. •Do Not dry clean Seat Cut-Away •Do Not bleach Buckle •Do Not iron. Anchor Bracket Fig. 40c Fig. 39b Copyright © 2021, Baby Trend, Inc. Copyright © 2021, Baby Trend, Inc.

  • Page 22: Low Birth Weight Harness Shortening Routing

    Fig. 41b 7. Pull the crotch buckle anchor through to position 2 (Fig. 41c). Seat Cut-Away Numbered Slot adjustments Buckle Anchor Bracket Crotch buckle adjustments Fig. 41c Fig. 41d Copyright © 2021, Baby Trend, Inc. Copyright © 2021, Baby Trend, Inc.
  • Page 23 18. Place seat fabric on shell threading Low Birth Weight Routing. harness end loops through the inner Fig. 43a 30. Place child in seat and confirm harness most slots on the bottom seat fabric. is at or below child’s shoulder. Copyright © 2021, Baby Trend, Inc. Copyright © 2021, Baby Trend, Inc.

  • Page 24: Pillow, Insert And Harness Covers Use

    3- Above 40 lbs. harness slot. Discontinue use when the child NOTE: The Harness should be at or out requires use of harness position 5. from the hip but not under. Copyright © 2021, Baby Trend, Inc. Copyright © 2021, Baby Trend, Inc.

  • Page 25: Cup Holder Removal Installation And Cleaning

    4. Multiple pool noodles or towels and water. maybe secured together for - Rinse with clean water. elevation (Fig. 48e). - Never use “household” detergents Fig. 48e or solvents. Copyright © 2021, Baby Trend, Inc. Copyright © 2021, Baby Trend, Inc.

  • Page 26: Safety Checklist/Safe Practices

    Parts may be missing, damaged, or the Car seat may have been in a crash. √ Has the airbag been deactivated in a vehicle with a front only seat? Please Drive Safely Copyright © 2021, Baby Trend, Inc. Copyright © 2021, Baby Trend, Inc.

  • Page 27: Registration Information

    9.3 Cleaning Car Seat Parts and Buckles: manufacturing date to: - Wipe with mild solution of soap and water. Avoid wetting labels. Baby Trend®, Inc, 13048 Valley Blvd. Fontana CA 92335 or call 1-800-328-7363 or register online at: - Rinse with clean water.

  • Page 28: Warranty

    Baby Trend a.m. y 4:30 p.m. (PST).Un numero de autorizacion es requerido ® antes de la devolución de los producto(s) a Baby Trend ® Copyright © 2021, Baby Trend, Inc. Copyright © 2021, Baby Trend, Inc.
  • Page 29 Le service client peut être contacté au 1 (800) 328-7363 du lundi au vendredi 8 h – 16 h 30 (PST). Une autorisation sera nécessaire avant de retourner le produit à Baby Trend ® Copyright © 2021, Baby Trend, Inc.
  • Page 30 Copyright © 2021, Baby Trend, Inc. Copyright © 2021, Baby Trend, Inc.

Table of Contents

Save PDF