On Hood Installed Under Central Hood Or Ventilated Ceiling; Positioning; Minimum Distance; Assembling Hood On Oven - Electrolux HOST11 Installation Manual

F.3.4 On hood installed under central hood or
ventilated ceiling
In some cases, the following items could be
installed under a hood or ventilated ceiling.
Therefore it is not possible for them to be
connected to a centralised system as suggested
above.
922728
922729
922730
922731
922732
To prevent obstruction of the extraction hole, the
hood is supplied with a special screw. Assemble it
in the relevant hole on the upper panel.
F.4 Positioning
F.4.1 Minimum distance
For the overall space required and connection
dimensions, refer to the Hood Installation
Diagrams (see page 2) and chap. F of the oven
"Installation Manual";
All sides of the appliance must be at least 50 mm
from any surface.
HOST11
HOST21
HOSV11
HOSS21
HOSS11
• If hood maintenance is required, shift the oven
forward using suitable equipment.
If the hood is not connected to a centralised
extraction system, leave a free space of at least
400 mm above it to allow Customer Care to
access the technical compartment.
F.5 Assembling hood on oven
1. Lift the hood over the oven
2. Align the hood with the oven
a. For the following items:
922723
922724
922725
922726
922727
922731
922732
centre the steam duct with the
corresponding oven steam outlet duct and
check that the seal is correctly positioned,
to prevent steam from escaping when the
oven is working.
HOCT11E
HOCT21E
HOCV11E
HOCS21E
HOCS11E
HOSS21
HOSS11
20