Page 1
W A R R A N T Y - Visit wavedirect.co.uk to register your free Warranty package. SWIFT SPA INSTALLATION AND USER MANUAL READ CAREFULLY AND KEEP IT FOR LATER REFERENCE www.wavespas.com...
Page 2
9. Heat your spa water We know you can’t wait to jump into your new Wave hot tub and get started, however before you do Now to heat your spa! To do this you should press the heater button on the left side of your external that, please check out our set-up videos for an easy step by step guide as to how to get started with unit (the sun symbol).
Page 3
WARNING Carefully read, understand, and follow all information in this user manual before installing and using the swimming pool. These warnings, instructions, and safety guidelines address some common risks of water READ ALL INSTRUCTIONS AND SAFETY WARNINGS IN THIS MANUAL recreation, but they cannot cover all risks and dangers in all cases.
IMPORTANT SAFETY INSTRUCTIONS For your own safety and that of your product, make sure to following the safety precautions below. In order to avoid the possibility of hyperthermia (heat stress) occurring it is recommended that the average Failure to follow the instruction may result in serious injury, property damage or death. Improper temperature of spa-pool water should not exceed 40°C (104°F).
Structure gonflable Base de protection Bloc moteur 2.1. Package list Couverture Structure gonflable Base de prot Ensure to check all parts are present: SWIFT Prise différentielle Valve d’air Bouchon de vidange Tube de gonflage Couverture Structure gonflable Base de protection...
3. INSTALLATION 3. INSTALLATION WARNING : Spa installed on inadequately level surfaces are subject to leaking. forming irregulari- The number of persons required for installation: 1 adult at least. ties or collapses. which can result in properly damage or serious injury for those in or around the spa area! CAUTION : Please choose your set-up area carefully as lawn and other desirable vegetation undereath the ground cloth (if applicable) wil die.
3. INSTALLATION 4. USAGE 4.1. Control panel LED Display Temperature Increase Button 13) Check that the drain plug is closed 14) Fill the spa pool until the indicated properly. Heat Button be used. Temperature units Massage Button selector bottom of the spa. Pull the outer wall out from the top edge, all around the bottom of the spa, so Temperature Decrease Button Temperature...
4. USAGE 5. MAINTENANCE 5.1. Water maintenance WARNING : A bad pool water quality can harm your health. Depending on the frequency and conditions of use: Note: - The pool water should be changed every 15 to 30 days. Use a water test kit to control the parameters of the water before using the spa, or at least once a week.
5. MAINTENANCE 6. TROUBLE SHOOTING 5.3. Drainage and storage 6.1. Troubleshooting Drainage Here are some useful tips to help you to diagnose and rectify common sources of Check the stopper on the bottom of the pool and the drain cap. trouble.
If the screen displays an error code “Ex”, please refer to the table below. the factory. Wave warrants this product against defects in material and workmanship for a period of time, Warranty for this product begins on the date of purchase and Wave requires presen-...
Need help?
Do you have a question about the SWIFT and is the answer not in the manual?
Questions and answers