Benthin P2600 Installation Operation Care

Mounting
c) Push the tension cord brackets over the fixing plates.
d) Mount the operating handle.
Operating
handle
After having checked that
the pleated blind functions as
prescribed, the excess cord ends
can be cut off.
Attention: Adjustment of the cord tension must be uniform and
may only be made by a professional.
Care
Thanks to a special manufacturing process, our fabric qualities are
furnished with an antistatic finish and are therefore resistant to
dust and dirt. Occasional brushing with a soft brush or a feather
duster is usually sufficient.
When cleaning glass and the window frame, make sure that no
water or caustic cleaning agents come into contact with the
pleated blind fabric.
No guarantee can be offered for damage to fabrics that is
attributable to Condensation, cleaning agents or soiling by insects.
Operation
Pleated blind with stretched cords are operated by use of the
finger grip.
Attach the control rod to the operating handle.
Locking
Click the operation profile over the tension cord bracket
"Click" Operation profile
Tension cord bracket
. Misprints, errors and changes excepted . Version 18-05-2016 . 97000177
®
© 2016 Benthin
Installation – Operation – Care
Model P2600, P2620
P2600
P2620
Dear Customer,
this dimensionally accurate pleated blind was produced especially
according to your requirements. High qualilty materials and a design that is
perfect in function and elegance guarantee a long service lifetime and thus
ensure great pleasure in the purchased product.
Your pleated blind Manufacturer
Please read this intructions carefully
before fitting the blind
Blinds must be fitted by skilled personnel.
Wrong installation may result in accidents.
Alterations of the blind must be approved by the blind manufacturer.
No screws for fixing are enclosed.
Always use appropriate screws and plugs suited for the wall or ceiling
material where the blind is fitted!