Table 12-10: Pi-Control Parameters - M1 ➔ G1.9; Table 12-11: Preset Speeds - M1 ➔ G1.10 - Johnson Controls VSD Series User Manual

VSD Series Drives User Manual
PI-Control Parameters — M1 ➔ G1.9
Table 12-10: PI-Control Parameters — M1 ➔ G1.9
Code Parameter
P1.9.1 US/Metric Units
P1.9.2 Setpoint Min.
P1.9.3 Setpoint Max.
P1.9.4 PI-StPt Ramp
Time
P1.9.5 PI-Input Source
P1.9.6 Sensor Min.
P1.9.7 Sensor Max.
P1.9.8 PI-Contr. P-Gain
P1.9.9 PI-Contr. I-Time
P1.9.10 PI Deadband
P1.9.11 PI Acting Mode
P1.9.12 Auto Accel. Time 0.1
P1.9.13 Auto Decel. Time 0.1
P1.9.14 Auto S-curve
Time
Preset Speeds — M1 ➔ G1.10
Table 12-11: Preset Speeds — M1 ➔ G1.10
Code Parameter
P1.10.1 Preset Speed 1
P1.10.2 Preset Speed 2
P1.10.3 Preset Speed 3
P1.10.4 Preset Speed 4
P1.10.5 Preset Speed 5
P1.10.6 Preset Speed 6
P1.10.7 Preset Speed 7
12-16
Min. Max.
0 1
Sensor_Min PI_Setpoint_
Max
PI_Setpoint_ Sensor_Max
Min
0.00 20.00
0 5
(-10000) Sensor_Max
Sensor_Min (10000)
0.00 10.00
0.00 320.00
(0) (20000)
0 1
3000.0
3000.0
0.0 10.0
Min. Max.
0 100.0
0 100.0
0 100.0
0 100.0
0 100.0
0 100.0
0 100.0
For more information visit: www.johnsoncontrols.com
ID
Unit Default Number Description
0 1101
(-100) 1102
(100) 1103
s 1.00 1104
0 1106
(-100) 1107
(100) 1108
0.10 1109
s 30.00 1110
(0) 1111
1 1112
s 60.0 1113
s 60.0 1114
s 0.0 1115
Unit Step Default
% 0.1 30.0
% 0.1 40.0
% 0.1 50.0
% 0.1 60.0
% 0.1 70.0
% 0.1 80.0
% 0.1 90.0
Eaton Technology
Powered by
November 2009
Minimum limit for the
PI-Controller setpoint.
Maximum limit for the
PI-Controller setpoint.
Parameter for the PI-Setpoint
ramp time. Default: 1.00s
PI-Controller Input Source
Selection:
Default #0 = (A) AI-1
0 = (A) AI-1
1 = (A) AI-2
2 = Fieldbus, ProcessData1
3 = Min. Both
4 = Max. Both
5 = Ave. Both
Actual Sensor minimum value at
0/4 mA.
Actual Sensor maximum value
at 20 mA.
P-Term (Gain) for the PI-
controller.
I-Term (Integral Time) for the
PI-controller.
Deadband area in units.
(Hysteresis to PI Setpoint)
PI-controller acting mode.
0 = Reverse acting
1 = Forward acting
Auto Mode Accel. Time
Auto Mode Decel. Time
Auto Mode and PI-control is
NOT active
ID
Number Description
1701 Preset speeds when
Digital Inputs are
1702
programmed
1703
1704
1705
1706
1707
LIT-1201828