Page 1
CS Series 50.4 4 CHANNEL POWER AMPLIFIER SERVICE MANUAL JBL Consumer Products 250 Crossways Park Dr. Woodbury, New York 11797 Rev0 3/2004...
Page 2
(305mm x 254mm x 57mm) Fuses: 25A x 2 JBL continually strives to update and improve existing products, as well as create new ones. The specifications and details in this and related JBL publications are therefore subject to change without notice.
Page 3
CS Series 50.4 APPLICATIONS – CS200.1 The CS subwoofer amplifier is a single-channel amplifier. There are two sets of terminals to make it easy to connect multiple woofers. Either set of (+/–) terminals may be used when connecting woofers. To the right are two application diagrams to help plan your subwoofer system installation.
Page 4
CS Series 50.4 CONTROLS AND SETUP SETTING THE SETTING INPUT CROSSOVER(S) SENSITIVITY Determine your system plans and set 1. Initially turn the INPUT LEVEL control(s) the crossover mode switch accordingly. to minimum (counter clockwise). If your system design does not include 2.
Page 6
Block Diagram CS50.4 CS Series 50.4 MAIN AMP MODE HP/FLAT/LP BOOST FRONT L BALANCED VARIABLE LPF/HPF 2 ohm/4 ohm VARIABLE INPUT INPUT (UNIT GAIN) 32Hz--320Hz/12dB 0dB--6dB/45Hz FRONT L 10 320 10 50 SPEAKER AUX OUT FRONT L+ REAR L MAIN AMP...
Need help?
Do you have a question about the CS Series and is the answer not in the manual?
Questions and answers