Download Print this page
Kenmore C41052 Operating Instructions
Kenmore C41052 Operating Instructions

Kenmore C41052 Operating Instructions

Advertisement

Quick Links

Before Operating Your Washer
Read your washer Owner's Guide. It has
important safety and warranty information. It also
has many suggestions for best washing results.
To reduce the risk of fire, electric shock,
or injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS in your washer Owner's Guide before
operating this appliance.
Operating Steps
Read and follow Washing Procedures in your
Owner's Guide. It provides detailed information for
preparing the wash load and choosing control
settings to ensure best washing results.
1. Sort laundry into loads that can be washed
together.
2. Prepare items for washing.
Printed in U. S. A.
OPERATING INSTRUCTIONS
ON
OFF
3. Pretreat stains and heavy soil.
4. Add laundry load to the wash drum.
5. Open the dispenser drawer and add the
measured amount of detergent to the
detergent compartment. If desired, add liquid
bleach and fabric softener to the appropriate
compartments. Slowly close dispenser drawer.
The washer will not operate with the drawer
open.
6. Set Wash/Rinse Temperature according to
fabric type and soil level of each load.
7. Select the Cycle Signal to sound at the end
of the cycle, if desired.
8. If desired, select Extra Rinse in the Regular
or Perm Press cycle.
9. Select Final Spin Speed, as desired, when
using the Perm Press or Hand Washables
cycles.
10. Push in the cycle selector knob and turn it
clockwise to the desired wash cycle.
11. Start the washer by closing the door and
pulling out the cycle selector knob. The
washer will not operate with the door open.
As a safety measure, the door will
automatically lock during the entire wash cycle.
To stop the washer, push in the cycle
selector knob.
To change a cycle, push in the cycle
selector knob and turn it clockwise to the
desired setting.
Pull out the knob to restart the washer.
12. Remove items when cycle ends. When the
Cycle Signal control is on, a signal will sound at
the end of the cycle.
Note: From time to time you may see water in
the bleach and fabric softener compartments.
This is a result of the siphoning action and is
part of the normal operation of the washer.
P/N 134063700 (0108)
C41052

Advertisement

loading

Summary of Contents for Kenmore C41052

  • Page 1 OPERATING INSTRUCTIONS C41052 Before Operating Your Washer 10. Push in the cycle selector knob and turn it 3. Pretreat stains and heavy soil. clockwise to the desired wash cycle. 4. Add laundry load to the wash drum. 11. Start the washer by closing the door and Read your washer Owner's Guide.
  • Page 2 Cycle Selection Hand Washables Cycle Auto Temp Control Up to 9 minutes of gentle tumble action for the The normal temperature of warm and cold wash water gentle care of knit, delicate and hand washable can be affected by the hot water heater setting and For best results, follow the fabric care label directions items.