Epoch Design Gabriel 5169 Instructions

Full loft bed

Advertisement

1/5
Congratulations on the purchase of your Gabriel Full Loft Bed. This bed has been crafted to the
highest standards of quality and safety and will give you many years of
enjoyment and practical use.
Since this bed is a natural wood product, there will be variations in color and grain, and minor
checking may occur. This is normal and does not compromise the integrity of your bed. In fact,
variation in character of solid hardwood is integral to the beauty and appeal of hardwood
furniture, and distinguishes it from prefabricated, synthetic and composite materials.
Several basic safety considerations must be adhered to when using this bunk bed.
TO HELP PREVENT SERIOUS OR FATAL INJURY FROM ENTRAPMENT OR FALLS:
• Never allow a child under 6 years on upper bunk
• Always use the recommended size mattresses or mattress supports – standard full 54" x 74" (137.2 cm x 188 cm)
– to help reduce the likelihood of entrapment or falls
• Ensure thickness of mattress does not exceed 9" (22.9 cm) for the upper bed
• Surface of mattress must be at least 5" (12.7 cm) below upper edge of safety rails
• Always use safety rails on both sides of upper bunk
• Do not allow horseplay on or under bed(s) and prohibit jumping on the bed(s)
• Prohibit more than one person on upper bed
• If the bunk will be placed next to a wall, the safety rail that runs the full length of the bed should be placed
against the wall to prevent entrapment between the bed and the wall
• Follow the information on the warning labels appearing on the upper bunk end board and on the carton
• Do not remove warning labels from bed
• Periodically check and ensure that the safety rails, ladder and other components are in their proper positions,
free from damage, and that all connectors are tight
• Do not use substitute parts
• Contact manufacturer or dealer for replacement parts
• The use of a water or sleep otation mattress is prohibited
• Keep these instructions for future reference
• Use of a night light may provide added safety for a child using the upper bunk
• STRANGULATION HAZARD- Never attach or hang items to any parts of the bunk bed that are not designed
for use with the bed, including but not limited to hooks, belts or jump ropes
On this insert you will nd a list of the hardware and bunk bed parts, as well as detailed
Assembly instructions. Assembly is quite simple, and requires only a at head screwdriver and a
Phillips head screwdriver. The use of a power drill with Phillips head attachment is helpful but
not necessary. Assembly will be most easily accomplished if you take the time to carefully sort
the hardware and familiarize yourself with the function of each piece.
If you need assistance with assembly, part replacement, or any other matter, please contact the
toll-free Epoch Design Customer Service Team from Monday through Friday, 9 AM-5 PM PST at
1 (800) 589-7990. You may also email your request or comments to info@epochbydesign.com
and a customer service representative will respond.
Gabriel Full Loft Bed
HAVE QUESTIONS OR CONCERNS? CALL US FIRST: 1-800-589-7990
Copyright © 2018 Epoch Design™ All rights reserved
5169: GA-FU-LB-NB
5164: GA-FU-LB-CO
14-Aug-2018
Thank you and Enjoy

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Gabriel 5169 and is the answer not in the manual?

Questions and answers

Summary of Contents for Epoch Design Gabriel 5169

  • Page 1 If you need assistance with assembly, part replacement, or any other matter, please contact the toll-free Epoch Design Customer Service Team from Monday through Friday, 9 AM-5 PM PST at 1 (800) 589-7990. You may also email your request or comments to info@epochbydesign.com and a customer service representative will respond.
  • Page 2 14-Aug-2018 HARDWARE LIST 36x 100mm bolts 2x 80mm bolts 42x 30mm slat screws 4x Connector pins Used to connect end boards, Used to secure center support Used to secure slat to rails Used to connect upper ladder steps and front safety rails and lower bunks 16x 40mm bolts 9x 40mm JC screws...
  • Page 3 14-Aug-2018 PLEASE NOTE: The Gabriel Loft Bed directions are for a right side ladder con guration. The Gabriel Loft Bed can be assembled as a left ladder con guration with a few alterations in assembly, shown in steps 10 & 11. RIGHT LEFT To assemble the upper section of the Full Loft Bed, attach the two upper...
  • Page 4 14-Aug-2018 Attach the upright supports G To assemble the lower section of the loft, attach the and long safety rails E to the rear side rail C bottom end boards O to the back rails F and I. of the upper loft bunk using four 40mm bolts. The upper back rail F has a groove lengthwise along the top and The long safety rail will be on the...
  • Page 5 14-Aug-2018 Rotate the ladder/safety rail assembly so the notches face the loft Locate the three ladder steps P and position them as shown. bed and attach it to the loft using two 40mm bolts on short upright L and two 40mm bolts on ladder upright K as shown. Insert four barrel nuts into each step.

This manual is also suitable for:

Gabriel 5164

Table of Contents