How the system works
The user should always wear the knitted conductive glove on the hand which is NOT
holding the appliance :
- The conductive glove no. 8 gives information to the electronics to re-open the appliance
in the event of contact with the cutting head.
Note :
an inner glove (ref.356S) can be used for comfort but is not necessary.
Make sure you do not use inner glove for comfort and the conductive glove the wrong way round.
To differentiate between them: only the conductive glove no. 2 has a Velcro patch.
You must disconnect the secateurs for all these operations.
Do not use any outer glove over the INFACO conductive glove.
1
Slip the plug no. 1 through the eye hole no. 3
3
n°4
Turn the vest around and slip the fix tongue no. 2
through the central suspender ring no. 4.
You must use only INFACO conductive gloves.
Setting up the system
n°1
n°3
n°2
2
Put the fix tongue no. 2 through the eye hole no. 3
4
n°2
n°5
On the opposite suspender to the battery
connection, slip the fix tongue no. 2 through the
first strap no. 5, then though the second no. 6.
2
n°3
n°6
n°2