Specific Absorption Rate Information - Lenovo Mirage VR S3 Safety, Warranty & Quick Start Manual

Table of Contents

Advertisement

Compliance with the RE Directive
Lenovo PC HK Limited declares that the radio equipment type Lenovo VR-1541F
is in compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
http://www3.lenovo.com/us/en/social_responsibility/EU_DoC_wireless_
options
This radio equipment operates with the following frequency bands and
maximum radio-frequency power:
Model Name
Frequency Bands
802.11a/b/g/n/ac
2.4/5 GHz
Lenovo VR-3030S
Bluetooth 2.4 GHz
The above information is for EU countries only. Please refer to the actual
product for supported frequency bands in other countries.

Specific Absorption Rate information

|
YOUR MOBILE DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO
RADIO WAVES.
Your mobile device is a radio transmitter and receiver. It is designed not to
exceed the limits for exposure to radio waves (radio frequency electromagnetic
fields) recommended by international guidelines. The guidelines were
developed by an independent scientific organization (ICNIRP) and include
a substantial safety margin designed to assure the safety of all persons,
regardless of age and health.
The radio wave exposure guidelines use a unit of measurement known as
the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2 W/
24
Maximum Conducted
Power (dBm)
<20
<20
kg. Tests for SAR are conducted using standard operating positions with the
device transmitting at its highest certified power level in all tested frequency
bands.
The highest SAR values under the ICNIRP guidelines for your device model are
listed below:
Maximum SAR for this model and conditions under which it was recorded.
Europe 10 g
Lenovo
SAR Limit
Head
VR-3030S
(2.0 W/kg)
During use, the actual SAR values for your device are usually well below
the values stated. This is because, for purposes of system efficiency and to
minimize interference on the network, the operating power of your mobile
device is automatically decreased when full power is not needed for the data
connection.
The lower the power output of the device, the lower its SAR value.
If you are interested in further reducing your RF exposure then you can easily
do so by limiting your usage or simply using a hands-free kit to keep the device
away from the head.
The Bluetooth capability of this device can only be used for pairing with the
controller. It cannot be paired with any other Bluetooth device.
WLAN,
0.097 W/kg
Bluetooth
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vr-3030s

Table of Contents