Do you have a question about the 1000 000 000 and is the answer not in the manual?
Questions and answers
John E Young
March 26, 2025
Need (8) P2 wasn't in contents
1 comments:
Mr. Anderson
March 26, 2025
You can obtain (8) P2 parts for the HAMPTON BAY model 1000 000 000 by contacting Hampton Bay Customer Service. Call 1-855-HD-HAMPTON during their service hours: - Monday-Friday: 8 a.m. - 7 p.m. EST - Saturday: 9 a.m. - 6 p.m. EST
Alternatively, visit HAMPTONBAY.COM for further assistance.
Page 1
THANK YOU We appreciate the trust and con dence you have placed in Hampton Bay through the purchase of this gazebo. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank...
Table of Contents Table of Contents ............2 Tools required ................3 Safety Information ............2 Hardware Included ..............3 Warranty ................. 2 Package Contents ..............4 What is Covered ...............2 Operation ............... 7 What is Not Covered ..............2 Care and Maintenance ..........17 Warning..............2 Service Parts ...............
Pre-installation PLANNING INSTALLATION To prevent damage, place all parts on a soft surface during assembly. Tools required for assembly (not included): Allen wrench (included), hammer, screwdriver, stepladder, level and other safety items such as gloves, safety goggles and hardhat. NOTE: Tools and protective articles below are not provided.
Operation Installing the Post □ Insert the Base Cover (B) into Post (A), attach Post (A) to the Base (C) with Bolt (AA). Inserting the Lintel □ Insert the Right Lintel (D2) into the Lintel Cover (F), insert the Connector (E) into the Lintel (D2/D1). NOTE: Please take note of the direction of lintel cover and Lintel (D1/D2).
Page 8
Operation (continued) Installing the Lintel and Connector □ Connect the Lintel (D1/D2) with the Connector (E) by bolt (AA), at the same time, connect the Connector (G1) and the Connector (E) by Bolt (AA) in the upper side. NOTE: Please take note of Connector’s direction. Installing the Lintel and Post □...
Page 9
Operation (continued) Installing the Support Bar □ Attach the Left Support Bar (H1) to the Left Lintel (D1) and Post (A) by Bolt (AA); attach the Right Support Bar (H2) to the Right Lintel (D2) and Post (A) by Bolt (AA). Installing the Corner Connector and Lintel □...
Page 10
Operation (continued) Installing the Top Connector and Long Top Bar □ Attach the Top Connector (G2) to the Long Top Bar (I1) by Bolt (AA). Installing the Long Top Bar □ Attach the Long Top Bar (I1) to the Big Top Connector (J) by Bolt (AA).
Page 11
Operation (continued) Installing the Short Top Bar □ Attach the Short Top Bar (I2) to the Big Top Connector (J) by Bolt (AA). □ Connect the Connector (P1) and Connector (G1) to the end of Short TOP Bar (l2) by Bolt (AA). □...
Page 12
Operation (continued) Installing the Small Top Bar and Big Top Connector □ Attach the Small Top Bar (K) to the Big Top Connector (J) by Bolt (AA). Installing the Small Top Panel and Roof Border □ Attach the Small Top Panel (R) to the Small Top Bar (K) by Bolt (AA).
Page 13
Operation (continued) Installing the Small Top Center and Small Top Cover □ Attach the Small Top Roof Cover (Q1) to the Small Top Bar (K) by Bolt (CC). □ Attach the Small Top Cover (L2) to the Center Connector (L1) by Finial (L3).
Page 14
Operation (continued) Installing the Sliding Tube □ Insert one end of the Sliding Tube (P2) into the Connector (P1), attach the other end of the Sliding Tube (P2) to the Long Top Bar (l1) by Bolt (AA). NOTE: To avoid destroying the nish, please handle it with care.
Page 15
Operation (continued) Installing the Big Top Cover and Connector Fig 26 □ Attach the Big Top Panel Cover (Q2) to the Long Top Bar (I1) by Bolt (CC). □ Attach the Connector (Q3) to the Big Top Connector (J) by Bolt (AA). NOTE: To avoid destroying the nish, please handle it with care.
Page 16
Operation (continued) Installing the Mosquito Net and Fixing the Gazebo □ Hang the Mosquito Net (W) onto the Sliding Tube (P2) by Plastic Ring (FF). □ Adjust position of gazebo and anchor posts to the ground by inserting the Stakes (GG) into each hole in each Base Plate. HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Care and Maintenance □ For cleaning, use a mild detergent solution, rinse with water, and allow to air dry. Do not use acetone, abrasive, or other special detergents as they would be harmful to the product’ s nish. □ Due to the nature of steel, surface oxidation (rusting) will occur if this protective coating is scratched.
Service Parts MODEL TYPE Part Description Quantity Bolt\Flat Washer (M6*15) Bolt\Plastic Washer (M6*25) Bolt\Plastic Washer (M6*35) Bolt\Flat Washer\Nut (M6*53) Blot (M6*15) Hanger HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Page 19
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
Need help?
Do you have a question about the 1000 000 000 and is the answer not in the manual?
Questions and answers
Need (8) P2 wasn't in contents
You can obtain (8) P2 parts for the HAMPTON BAY model 1000 000 000 by contacting Hampton Bay Customer Service. Call 1-855-HD-HAMPTON during their service hours:
- Monday-Friday: 8 a.m. - 7 p.m. EST
- Saturday: 9 a.m. - 6 p.m. EST
Alternatively, visit HAMPTONBAY.COM for further assistance.
This answer is automatically generated