Advertisement
Quick Links
Quad Monitor Desk Stand
Instruction Manual
SKU: STAND-V004FG
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v004fg
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
309-278-5303
Chat live with an agent!
Advertisement
Related Manuals for Vivo STAND-V004FG
Summary of Contents for Vivo STAND-V004FG
- Page 1 Quad Monitor Desk Stand Instruction Manual SKU: STAND-V004FG Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v004fg GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
-
Page 2: Package Contents
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. -
Page 3: Tools Needed
TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY. 22 lbs Failure to do so may result in serious injury. (10 kg) PER ARM Phillips Screwdriver ASSEMBLY STEPS STEP 1 Loosen the grub screw in Lower Pole (b) using the small Allen Key (n). Screw Upper Pole (a) into lower pole, then tighten the grub screw. - Page 4 STEP 3 Install Swivel Arm (d) to the Pole (a,b). Fasten the bolt with supplied Allen Key (n). Attach the Wire Clip (k1,k2) to the Pole (a,b) and Swivel Arm (d). STEP 4 OPTION A: Flat Back Monitor Fasten the VESA Plate (e) using thumbscrews (o).
- Page 5 STEP 5 Slide the monitor onto the head of Swivel Arm (d) as shown in the above diagram. Install the security Nut (h). Make sure the security nut is installed before you rotate the monitor.
- Page 6 STEP 6 Tighten the bolt with the supplied Allen Key (n) to fix the tilt angle. If one monitor is lower, remove the Nut (h) and turn the bolt counter-clockwise with supplied Allen key (n) to raise the monitor. Install the Nut (h) after the adjustment.
- Page 7 STEP 7 Adjust swivel joint tension if needed using the Allen Key (n). Manage the wires and store the Allen keys (n) in Wire Clip (k1) for future use.
- Page 8 - 92% within < 3hr www.vivo-us.com : < 15 M AVG. RESOLUTION TIME (within office hrs) Chat live with an agent! : 5M 4S 309-278-5303 AVG. RESOLUTION TIME (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-V004FG and is the answer not in the manual?
Questions and answers