QUICK SETUP GUIDE
32" 60Hz LED TV
NS-32DF310NA19
INCLUDED ACCESSORIES
Voice Remote with Alexa
and two AAA batteries
+ + +
TV stands
Self tapping screws
(4 mm × 16 mm length)
(4 pcs.)
Power cord
STOP
Before using your new product, please
read these instructions to prevent any
damage.
Do not plug your power cord in until all
other devices have been connected.
INSTALLING THE STANDS OR A WALL MOUNT
1
Place your TV face-down on a cushioned, clean surface.
STANDS
1 Align the TV stand screw holes
with the holes on your
TV's bottom.
2 Use a Phillips screwdriver
and provided screws to
secure each stand
to your TV.
Q4 x 16 mm screws
WALL MOUNT
Before you mount your TV, make sure that:
• You remove the stands.
• The wall-mount bracket supports the weight of your TV.
See the instructions that came with your wall mount
for more information about how to correctly mount your TV.
WARNING: Your TV has four VESA mounting holes on the back.
You must secure a wall-mount bracket to all four holes.
If you do not use all four holes, your TV may fall and cause
property damage or personal injury.
Note: Wall-mount screws are not included.
MAKING CONNECTIONS
2
HDMI
(best video quality)
Note: You can use the
HDMI 1 (ARC) jack to
connect a digital
audio system.
AV
(good video quality)
AUDIO/VIDEO OUT
Coaxial
(good video quality)
HD
HD
Connect an antenna to
access live over-the-air TV.
R
L
VESA Mounting Pattern
100 × 100 mm
Screws: type M4, 12 mm to
20 mm length depending
on the wall mount
AUDIO
OUT
DIGITAL
OPTICAL
OUTPUT
HDMI1
HDMI2
HDMI3
(ARC)
HDMI OPTIONS
VIDEO
L
AUDIO
R
AV IN
ANT/CABLE
ETHERNET
FEATURES
Q4 x 16 mm screws
VIDEO
ETHERNET
Note: Images do not necessarily represent the exact design
of your television.
ANALOG
L
R
AUDIO IN
SOUNDBAR
You can use the DIGITAL OPTICAL
DIGITAL
OUTPUT jack or the HDMI 1 (ARC)
jack.
Note: If you need to change the
digital audio format, go to the Home
OPTICAL
AUDIO IN
menu, select Settings, then select
Display & Sounds. Select Audio
SOUNDBAR
Output, then select Digital Audio
Format and change the setting to
PCM.
ETHERNET (optional)
Note: You can use a wired Ethernet connection to
access the internet, instead of a WiFi connection.
ETHERNET
Plug an Ethernet cable into the ETHERNET jack on
your TV and your Ethernet connection.
Power indicator
Remote control sensor
AUDIO OUT
DIGITAL
OPTICAL
OUTPUT
USB
USB
HDMI1
(ARC)
HDMI1
(ARC)
HDMI2
HDMI2
HDMI3
HDMI3
L
R
AUDIO
ANT/CABLE
AV IN
AUDIO
OPTIONS
Need help?
Do you have a question about the NS-32DF310NA19 and is the answer not in the manual?
Questions and answers
Where are the menu, channel up/down, and volume up/down on the tv
Tv can't detect remote
The Insignia NS-32DF310NA19 TV may not detect the remote because it needs to be paired or re-paired. If only the power button works while other buttons do not, the remote is likely unpaired. To fix this, try the following:
1. If the remote has a pair button: Open the battery compartment and press the pair button.
2. If the remote does not have a pair button: Press and hold the Home button on the remote for 30 seconds while pointing it at the TV.
This should reconnect the remote to the TV.
This answer is automatically generated
How to program my tv stations I get the channel but the picture won't come om
Run a channel scan by going to Settings > Live TV > Channel Scan and follow the on-screen instructions to complete the process. If the issue persists, try re-inserting or replacing the remote batteries and scanning again.
This answer is automatically generated
is this model a smart v
Yes, the Insignia NS-32DF310NA19 is a smart TV. It includes WiFi capability, an Ethernet port for network connectivity, and supports features like Alexa-enabled voice control.
This answer is automatically generated