Query Ip Address And Restore Default Setting - Dinstar UC200-2S2O User Manual

3 Basic Operation
3. On the condition that the device is running normally, press the RST2 button for more than
6 seconds, and all configurations are restored to the default settings.

3.9 Query IP Address and Restore Default Setting

After connecting a telephone to the FXS port, you can dial *158 to query the IP address of
LAN port and dial *159 to query the IP address of WAN port.
If you want to restore UC200-2S2O to default settings, you can press the RST button for
more than 6 seconds or you can configure it on the Web interface.
On the Web interface, click System  Backup/Restore/Upgrade and then select the parts
(system, network or service) that need to be restored to default settings. Click Reset and then
restart the device, and the selected parts will be restored to default settings.
Figure 3-2 Reset to Defaults
UC200-2S2O User Manual 14
Copyright©2011-2018 Dinstar