Hitachi X200 Series Connection Manual page 43

6.4 SJ200 series
Device
Coil
Holding register
• Holding register number 0900h is an address for the command (enter command) to write in
• You can only set the Read Area Size for the system area available to use in the External
• Refer to the precautions on manual notation for icons in the table.
6.5 L200 series
Device
Coil
Holding register
• Holding register number 0900h is an address for the command (enter command) to write in
• You can only set the Read Area Size for the system area available to use in the External
• Refer to the precautions on manual notation for icons in the table.
GP-Pro EX Device/PLC Connection Manual
Bit Address
00000 - 0001F
-
nonvolatile memory. By writing "1" in 0900h, writing to nonvolatile memory is enabled.
Device. Please refer to the GP Pro-EX Reference Manual for Read Area Size.
Cf. GP Pro-EX Reference Manual "LS Area (Direct Access Method Area)"
"Manual Symbols and Terminology"
Bit Address
00000 - 0001F
-
nonvolatile memory. By writing "1" in 0900h, writing to nonvolatile memory is enabled.
Device. Please refer to the GP Pro-EX Reference Manual for Read Area Size.
Cf. GP Pro-EX Reference Manual "LS Area (Direct Access Method Area)"
"Manual Symbols and Terminology"
This address can be specified as system data area.
Word Address
00000 - 00010
40000 - 40900
This address can be specified as system data area.
Word Address
00000 - 00010
40000 - 40900
43
Inverter MODBUS RTU Driver
32bits Notes
32bits Notes