Related Manuals for Pella Insynctive Lifestyle Series
Summary of Contents for Pella Insynctive Lifestyle Series
- Page 1 Pella Insynctive Product Guide ® ® Pella Lifestyle Series Motorized, Integrated Blinds and Shades ®...
-
Page 2: Table Of Contents
• Have a Home Automation System? • Warnings Product Overview • Specifications Detailed Instructions • Setting Up Pella® Lifestyle Series Motorized, Integrated Blinds or Shades • Programming Positions • Operating Blinds or Shades with Remote • Tilting Blind Slats • Pairing to Pella Bridge •... -
Page 3: General And Safety Information
— require a battery with an adequate charge. — may be damaged after installation. Therefore, Pella Insynctive products should not be relied upon in situations where life, safety, and/or protection of valuables are solely dependent on their function. Test each product at least once per year to help ensure proper operation. -
Page 4: Product Overview
1) the solar panel on the exterior side of the unit, requiring approximately 3 hours of direct sunlight a day, OR 2) a Pella Lifestyle Series WALL CHARGER that magnetically couples to the HGP. A wire provides power from the battery to the motor located in the headrail of BLIND or SHADE. -
Page 5: Detailed Instructions
• Slide the battery cover back into closed position. DOWN BUTTON 3. Pair REMOTE to Pella Lifestyle Series motorized BLIND or SHADE. • Hold REMOTE up to top cover approximately 6" from the end to activate pair mode. Move remote from side to side while pressed up against the glass. - Page 6 Pella Lifestyle Series Motorized, Integrated Blinds or Shades (continued) ® 4. Test BLIND or SHADE. • Press the Down button to move BLIND or SHADE down. LIGHT • Press the Up button to move BLIND or SHADE up. BUTTON 5. Set up BLIND or SHADE.
- Page 7 Pella Lifestyle Series Motorized, Integrated Blinds or Shades (continued) ® Program user position. • Touch the top end of REMOTE to BLIND or SHADE cover approximately 6" from the end where the wire connects. Move REMOTE back and forth slowly until BLIND or SHADE...
-
Page 8: Operating Blinds Or Shades With Remote
Pella Lifestyle Series Motorized, Integrated Blinds or Shades (continued) ® OPERATING BLIND OR SHADE WITH REMOTE • Press and release Up button: Pressing the Up button for less than LIGHT 1 second will cause BLIND or SHADE to automatically move to the upper position that has been programmed by the user. -
Page 9: Pairing To Pella Bridge
By pairing to BRIDGE, you can control your BLIND or SHADE from virtually anywhere using the Pella Insynctive app. Download the LIGHT Pella Insynctive app from the app store appropriate to your device. • Press and hold the pair button until the light begins flashing BUTTON orange. -
Page 10: Additional Instructions
It is recommended that the exterior glass surface be cleaned every six months or whenever dirt noticeably builds up on the glass. Use an ammonia-free glass cleaner and soft cloth. Pella Lifestyle Series Motorized, Integrated Blinds and Shades with Insynctive | 10 ®... -
Page 11: Replacing Batteries
Battery life is expected to exceed five years in most applications. When the battery reaches the end of its life, it will lose its charge quickly and will require charging with the wall charger on a more frequent basis. Contact your local Pella sales representative to purchase a replacement battery. WARNING: Batteries carry the risk of fire, explosion and burns. Do not disassemble or incinerate. -
Page 12: Resetting To Factory Defaults
Shades to their factory resets, use your phone's camera to capture this QR code. BLIND or SHADE will move to top position, to acknowledge successful reset Pella Lifestyle Series Motorized, Integrated Blinds and Shades with Insynctive | 12 ®... -
Page 13: Troubleshooting
Batteries are low. Batteries may be recharged with WALL • moving slowly. CHARGER. If problem persists after charging batteries for 12 hours, contact your local Pella sales representative to purchase a replacement battery. If the light on REMOTE is blinking, BLIND or SHADE is in •... -
Page 14: Inductive Charging Instructions
• The transmitter requires a 12VDC power source. Only use the wall adapter Close up of specifications provided to you with charger kit purchased from Pella. on the 12V wall adapter • If you are using the provided power source, and still have a blinking RED LED, call Customer Service at 855-473-5524. -
Page 15: Led Color Indicators On Transmitter
Red Light - Error Code If you have any questions or issues regarding your Pella Insynctive inductive charging system for motorized blinds and shades, or any other Pella product please reach out to our Customer Service at 855-473-5524. Yellow Light - Error Code... -
Page 16: Fcc Compliance And Industry Canada
IC: 11009A-206B0000 IC: 11009A-209L0000 Limited Warranty A two-year limited warranty comes standard with purchase. For complete warranty details, visit Pella.com/Warranty. © 2020 Pella Corporation Pella Lifestyle Series Motorized, Integrated Blinds and Shades with Insynctive | 16 ILSPG0920 | W13194 ®...
Need help?
Do you have a question about the Insynctive Lifestyle Series and is the answer not in the manual?
Questions and answers