Error Codes - BT OSE100 Operator's Manual

A
E D B
C
Code
Error type
No
E50 Platform switch active more than 5
minutes when truck is inactive
E80 Steer servo error
E81 Steer servo error, too low voltage
E101 Hardware error
E104 Hardware error
E106 Too high current on digital output or
field current too high
E107 Main contactor not turned on
E108 Contactor welded
E110 System error
E113 Steer servo, unspecified error
E114- Steer servo error
E134
E135 Potentiometer must be calibrated, use
parameter 36
E136 Potentiometer error
E137 Steer servo, check sum error
E138 Steer servo, no communication
E139 Communication error
E140 Check sum error
E141 Faulty software
E150 Communication fault
E151 Communication fault
Controls and instruments

Error codes

When an error occurs a code is displayed in character window
(A) and the indicator window (E) lights.
The effect of each error code on the truck is shown in the table
below.
© BT Industries AB 222714-040
32
Effect on the truck
The truck drives in crawling speed;
2,5 km/h
The truck drives in crawling speed;
2,5 km/h
The truck drives in crawling speed;
2,5 km/h
The truck cannot be started
The truck is stopped
The truck is stopped
The truck is stopped
The truck is stopped
The truck is stopped
The truck is stopped
The truck is stopped
The truck is stopped
The truck is stopped
The truck is stopped
The truck is stopped
The truck is stopped
The truck is stopped
The truck is stopped
The truck is stopped
The truck is stopped