IMPORTANT SAFETY INSTRUCTIONS The lighting flash with arrowhead symbol within an CAUTION equilateral triangle is intended to alert the user to RISK OF ELECTRIC SHOCK the presence of uninsulated “dangerous voltage” DO NOT OPEN within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric CAUTION: TO REDUCE THE RISK OF shock to persons.
Page 3
6 ) Clean only with dry cloth 13 ) Refer all servicing to qualified service Unplug this product from the wall outlet before personnel. Servicing is required when the cleaning. Do not use liquid cleaners or aerosol has been damaged in any way, such apparatus as power-supply cord or plug is damaged, liquid cleaners.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS AUX 1 OPERATION INTRODUCTION AUX 2 OPERATION WHAT’S IN THE BOX 14 OPTICAL IN OPERATION HDMI IN AND HDMI OUT PRODUCT OVERVIEW SPEAKER/POWER WIRE HDMI OUT ONLY (ARC) SOCKET DIAGRAM 17 BLUETOOTH OPERATION REMOTE CONTROL MOUNTING OPERATION PLACEMENT...
INTRODUCTION Thank you for purchasing the JBL AURA Wall Mount Stereo which is designed to bring an extraordinary sound experience to your entertainment system. We encourage you to take a few minutes to read through this manual, which describes the product and includes step-by-step instructions for setting up and getting started.
REMOTE CONTROL 1. Power Button 2. Previous Button 3. Play/Pause,Memory/Preset/ Preset Play Button 4. Pair Button 5. Light Effect Button 6. Zone B Button 7. Zone A Button 8. BT Button 9. FM Button 10. AUX 1 Button 11. USB Button 12.
Page 9
REMOTE CONTROL BATTERY INSTALLATION 1.Slide and lift the battery door. 2.Install 2 (two) AAA size batteries into the battery compartment as indicated by the polarity markings. 3.Replace the battery door. Battery Precautions: Follow these precautions when using a battery in this device: 1.
MOUNTING Fig. A 4 " 16 " 8 " Fig. B 8 " cut out 4 " cut out 2 " (Allow for connections) 2 " Fig. C 1. Predrill 4 mounting holes as shown in Fig.A. Select fasteners (not included) suitable for the mounting materials. 2.
PLACEMENT When placing the media center in any type of enclosed space, be sure to allow space around it for ventilation. If placing in a tight space without ventilation, heat generated from the unit could produce a potential heat hazard. GENERAL OPERATION 1.
ADDING OPTIONAL EXTERNAL POWERED SUBWOOFER REAR PANEL EXTERNAL SUBWOOFER REM OUT White White REMOTE (not supplied) (if equipped) NOTE: Before connecting, disconnect power to AURA and the powered subwoofer. 1. Connect the audio cable as above, connect the REM OUT wire to the subwoofer REMOTE IN wire, if equipped. 2.
10 FM OPERATION BEFORE OPERATION Before operation, Insert the Antenna into the ANTENNA Jack on rear panel. Cable from FM antenna (not supplied) ANTENNA SEARCHING STATION 1. Power ON the AURA Wall Mount Stereo. Or press FM button on the Remote Control. 2.
11 USB OPERATION 1. Insert the USB device to the USB port on front of the AURA Wall Mount Stereo. 2. Power ON the unit. Reset button repeatedly until "USB" appears on the display. 3. Press the AUX 1 HDMI IN Or press USB button on the Remote Control.
13 AUX 2 OPERATION AUX 2 White White (not supplied) 1. Plug one end of the audio cable into the AUX 2 jack(L&R) on the rear of AURA Wall Mount Stereo. 2. Plug the other end of the audio cable into the LINE OUT jack(L&R) on TV, DVD Player etc. 3.
15 HDMI IN AND HDMI OUT (not supplied) Rear Panel (not supplied) HDMI OUT (ARC) Reset Front Panel AUX 1 HDMI IN HDMI OUT Any HDMI device (like DVD, Gaming system, etc.) 1. Connect as illustrated above and power on the unit. 2.
16 HDMI OUT ONLY (ARC) (not supplied) Rear Panel HDMI OUT (ARC) NOTE: Before connecting, please disconnect power. 1. Connect as illustrated above and power on the unit. 2. Press the ARC button on remote control or press the button on unit repeatedly until " ARC " appears on display.
17 BLUETOOTH OPERATION 1. Power ON the unit. 2. Press the button repeatedly until "BT" appears on display and blinks. Or press BT button on Remote Control. 3. Turn on the Bluetooth compatible device and enter pairing mode. "JBL AURA" "JBL AURA"...
LEARN OPERATION Control the AURA with another Remote Control (Available only for the Power, Volume Up, Volume Down and Mute functions.) 1. Power ON the unit. 2. Press and hold the LEARN button on the Remote Control for 2 seconds and release. "LEARN" appears on the display.
22 PRODUCT SPECIFICATIONS 21 TROUBLESHOOTING Never try to repair the product yourself. If you have problems General specification: using this product, check the following before you request • Power supply: 10 -14V,15A services. • Total speaker power output (Max.@THD 10%):120W System •...
Page 22
www.riverparkinc.com 2020 RIVERPARK Inc. V. 032020...
Need help?
Do you have a question about the JBL AURA WALL MOUNT STEREO and is the answer not in the manual?
Questions and answers