Samsung CLP-320N User Manual
Clp-320 series color laser printer
Hide thumbs
Also See for CLP-320N:
- Parts catalog (24 pages) ,
- Service manual (129 pages) ,
- User manual (61 pages)
Related Manuals for Samsung CLP-320N
Summary of Contents for Samsung CLP-320N
- Page 1 CLP-320 Series Color Laser Printer User’s Guide imagine the possibilities Thank you for purchasing a Samsung product.
- Page 2 This user’s guide is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this user’s guide.
-
Page 3: Table Of Contents
contents NETWORK SETUP (CLP-320N(K)/CLP-321N/CLP-325W(K)/ WIRELESS NETWORK SETUP (CLP-325W(K)/326W ONLY) About this user’s guide Features of your new product INTRODUCTION Machine overview Front view Rear view Control panel overview Understanding the control panel Status/ Toner LEDs Wireless LED Introducing the useful buttons Print screen button Demo print button Cancel button... - Page 4 Matte photo Setting the paper size and type Using the output support PRINTING Introducing useful software program Samsung AnyWeb Print Samsung Easy Color Manager Printer driver features Printer driver Basic printing Canceling a print job Opening printing preferences Using a favorite setting...
- Page 5 Cleaning the outside Cleaning the inside Storing the toner cartridge Toner cartridge storage Handling instructions Use of non-Samsung and refilled toner cartridge Estimated cartridge life Tips for moving & storing your machine TROUBLESHOOTING Redistributing toner Tips for avoiding paper jams...
- Page 6 CONTACT SAMSUNG WORLDWIDE Common Windows problems Common Linux problems Common Macintosh problems SUPPLIES How to purchase Available supplies Maintenance parts Replacing the toner cartridge Replacing the imaging unit Replacing the waste toner container SPECIFICATIONS Hardware specifications Environmental specifications Electrical specifications...
-
Page 7: Safety Information
safety information These warnings and precautions are included to prevent injury to you and others, and to prevent any potential damage to your machine. Be sure to read and understand all of these instructions before using the machine. Use common sense for operating any electrical appliance and whenever using your machine. Also, follow all warnings and instructions marked on the machine and in the accompanying literature. -
Page 8: Operating Method
If the machine gets overheated, it releases smoke, makes strange noises, or generates an odd odor, immediately turn off the power switch and unplug the machine. ► This could result in electric shock or fire. Caution During an electrical storm or for a period of non-operation, remove the power plug from the electrical outlet. - Page 9 Installation / Moving Warning Do not place the machine in an area with dust, humidity or water leaks. ► This could result in electric shock or fire. Caution Before moving the machine, turn the power off and disconnect all cords. Then lift the machine: •...
- Page 10 ► Otherwise, this could result in electric shock or fire. Do not remove any covers or guards that are fastened with screws. ► The machine should only be repaired by a Samsung service technician. Supply usage Caution Do not disassemble the toner cartridge.
-
Page 11: Regulatory Information
During normal operation, this machine produces ozone. The ozone produced does not present a hazard to the operator. However, it is advisable that the machine be operated in a well ventilated area. If you need additional information about ozone, contact your local Samsung dealer. Regulatory information_ 11... -
Page 12: Power Saver
Power Saver This printer contains advanced energy conservation technology that reduces power consumption when it is not in active use. When the printer does not receive data for an extended period of time, power consumption is automatically lowered. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. For more information on the ENERGY STAR program see http://www.energystar.gov. - Page 13 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or experienced radio TV technician for help. Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
- Page 14 CLP-320 Series: Low Voltage Directive (2006/95/EC), EMC Directive (2004/108/EC) CLP-325W(K): R&TTE Directive (1999/5/EC) The declaration of conformity may be consulted at www.samsung.com/printer, go to Support > Download center and enter your printer (MFP) name to browse the EuDoC. January 1, 1995: Council Directive 2006/95/EC Approximation of the laws of the member states related to low voltage equipment.
-
Page 15: Regulatory Compliance Statements
European Radio Approval Information (for products fitted with EU-approved radio devices) Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz band, may be present (embedded) in your printer system which is intended for home or office use. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices. -
Page 16: Openssl License
Only use drivers approved for the country in which the device will be used. See the manufacturer System Restoration Kit, or contact manufacturer Technical Support for additional information. OpenSSL License Copyright (c) 1998-2001 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. -
Page 17: China Only
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The licence and distribution terms for any publicly available version or derivative of this code cannot be changed. - Page 18 Regulatory information_ 18...
-
Page 19: About This User's Guide
about this user’s guide This user’s guide provides information about basic understanding of the machine as well as detailed explanation on each step during actual usage. It is a valuable resource for both novice and professional users for the proper installation and use of the machine. -
Page 20: Finding More Information
This help provides you with help information about the printer driver and instructions for setting up the options for printing (See "Using Machine Driver Help help" on page 61). If you have Internet access, you can get help, support, machine drivers, manuals and order information from the Samsung website, Samsung website www.samsung.com/printer. -
Page 21: Features Of Your New Product
features of your new product Your new machine is equipped with a number of special features that improve the quality of the documents you print. Special Features Print with excellent quality and speed • You can print in a full range of colors using cyan, magenta, yellow and black. -
Page 22: Features By Models
Network Interface 802.11 b/g/n wireless LAN Duplex (2-sided) printing (Manual) a. Depending on your country, wireless LAN cards may not be available. Contact your local Samsung dealer or the retailer where you bought your printer. ( ●: Included, Blank: Not available) -
Page 23: Machine Overview
introduction This chapter gives you an overview of your machine. This chapter includes: • Machine overview • Control panel overview Machine overview Front view This illustration may differ from your machine depending on its model. Output tray (face down) Output support Top cover Control panel Tray... -
Page 24: Rear View
Rear view This illustration may differ from your machine depending on its model. Rear cover release button Rear cover Power receptacle a. CLP-320N(K)/CLP-321N only. USB port Network port Introduction_ 24... -
Page 25: Control Panel Overview
Control panel overview This illustration may differ from your machine depending on its model. [1] CLP-320(K)/CLP-321/CLP-325(K)/ CLP-326/CLP-320N(K)/CLP-321N Shows the status of each toner cartridge (See "Status/ Toner LEDs" on page 26). Toner LEDs You can turn the power on and off with this button (See "Power button" on page 27). Power button Stops an operation at any time and there are more functions (See "Cancel button"... -
Page 26: Understanding The Control Panel
The machine has stopped due cannot guarantee a non-genuine Samsung toner cartridge's quality. to a major error. Service or repair required as a result of using non-genuine Samsung The machine is experiencing toner cartridges will not be covered under the machine warranty. -
Page 27: Cancel Button
Function Description Press this button and the green LED will start Printing the active blinking. When the green LED stops blinking, window release the button. Press this button and the green LED will start Printing the whole blinking. Release the button while it’s blinking. monitor screen •The page will be printed on the default page like A4 or Letter. -
Page 28: Printing A Demo Page
If you are a Windows or Macintosh OS user, install the software from the supplied CD. If you are a Linux OS user, download the software from the Samsung website (www.samsung.com/printer) and install. Machine software is occasionally updated for reasons like the release of new operating system and etc. -
Page 29: System Requirements
Contents • Printer driver: Use this driver to take full advantage of Windows your machine’s features. • Smart Panel: This program allows you to monitor the machine’s status and alerts you when an error occurs during printing. • Printer Settings Utility: This program allows you to set up printer’s other options from your computer. -
Page 30: Linux
Linux Item Requirement (recommended) RedHat® Enterprise Linux WS 4, 5 (32/64 bit) Operating Fedora Core 2~10 (32/64 bit) system SuSE Linux 9.1 (32 bit) OpenSuSE® 9.2, 9.3, 10.0, 10.1, 10.2, 10.3, 11.0, 11.1 (32/64 bit) Mandrake 10.0, 10.1 (32/64 bit) Mandriva 2005, 2006, 2007, 2008, 2009 (32/64 bit) Ubuntu 6.06, 6.10, 7.04, 7.10, 8.04, 8.10 (32/64 bit) SuSE Linux Enterprise Desktop 9, 10 (32/64 bit) -
Page 31: Macintosh
7. If the test page prints out correctly, click Yes. If not, click No to reprint it. 8. If you want to register your machine on Samsung website, click On-line Registration. If your machine is not connected yet to the computer, click How to connect?. -
Page 32: Linux
•For Mac OS X 10.5 ~ 10.6, click Default and find the USB connection. 17. For Mac OS X 10.3, if Auto Select does not work properly, select Samsung in Printer Model and your machine name in Model Name. •For Mac OS X 10.4, if Auto Select does not work properly, select Samsung in Print Using and your machine name in Model. -
Page 33: Sharing Your Machine Locally
When the Terminal screen appears, type in: [root@localhost root]#cd /opt/Samsung/mfp/uninstall/ [root@localhost uninstall]#./uninstall.sh d)Click Uninstall. e)Click Next. f)Click Finish. Sharing your machine locally Follow the steps below to set up computers to share your machine locally. -
Page 34: Syncthru™ Web Admin Service
network setup (clp-320n(k)/clp-321n/clp-325w(k)/clp-326w only) This chapter gives you step-by-step instructions for setting up the network connected machine and software. This chapter includes: • Network environment • Introducing useful network programs Network environment You need to set up the network protocols on the machine to use it as your network machine. -
Page 35: Printing Network Configuration Report
Starting the program 1.Connect your machine to the network with a network cable. 2.Turned on the machine. 3.From the Windows Start menu, select All Programs > Samsung Printers > SetIP > SetIP. Network setup (CLP-320N(K)/CLP-321N/CLP-325W(K)/CLP-326W only)_ 35 4.Click on the icon (third from left) in the SetIP window to open the TCP/IP configuration window. -
Page 36: Ipv6 Configuration
Linux OS manual to turn firewall off. 1.Print the machine’s network configuration report to find your machine’s MAC address. 2.Open the /opt/Samsung/mfp/share/utils/. 3.Double click the SetIPApplet.html file. 4.Click to open the TCP/IP configuration window. 5.Enter the network card’s MAC address, IP address, subnet mask, default gateway, and then click Apply. -
Page 37: Installing Network Connected Machine's Driver
A log-in page appears. 4. Type in the ID and Password then click Login. If it’s your first time logging into SyncThru™ Web Service, type in the below default ID and password. •ID: admin •Password: sec00000 5. When the SyncThru™ Web Service window opens, click Settings > Network Settings >... -
Page 38: Macintosh
7. If the test page prints out correctly, click Yes. If not, click No to reprint it. 8. If you want to register your machine on Samsung website, click On-line Registration. If your machine is not connected yet to the computer, click How to connect?. -
Page 39: Linux
Click Continue. l)When the uninstall is done, click Quit. Linux You need to download Linux software packages from the Samsung website to install the printer software. To install other software: •See "Installing the Smart Panel" on page 32. -
Page 40: Wireless Network Name And Network Key
wireless network setup (clp-325w(k)/clp-326w only) This chapter gives you step-by-step instructions for setting up the wireless network connected machine and software. This chapter includes: • Getting started • Choosing the wireless network installation type • Setting a wireless network with the WPS button •... -
Page 41: Setting A Wireless Network With The Wps Button
Setting a wireless network with the WPS button If your machine and an access point (or wireless router) support Wi-Fi Protected Setup™(WPS), you can easily configure the wireless network settings by pressing the WPS ( ) button on the control panel. If you want to use the wireless network using the infrastructure mode, make sure that the network cable is disconnected from the machine. - Page 42 Installing the machine on a wireless network with an access point (Windows) Items to prepare Ensure you have the following items ready. • Access point • Network-connected computer • Software CD that was provided with your machine • The machine installed with a wireless network interface •...
-
Page 43: Installing The Machine On An Ad-Hoc Wireless Network
7.After searching the wireless networks, a list of wireless networks your machine has searched appears. If you want to use the Samsung default ad-hoc setting, select the last wireless network on the list, Network Name(SSID) is portthru and Signal is Printer Self Network. - Page 44 5.Double-click the MAC_Installer folder. 6.Double-click the Installer OS X icon. 7.Enter the password and click on OK. 8.The Samsung Installer window opens. Click on Continue. 9.Read the license agreement and click on Continue. 10.Click on Agree to agree to the license agreement.
- Page 45 14.After searching the wireless networks, a list of wireless networks your machine has searched appears. If you want to use the Samsung default ad-hoc setting, select the last wireless network on the list, which Network Name(SSID) is portthru...
-
Page 46: Setting A Wireless Network With Network Cable
and Signal is Printer Self Network. Then, click on Next. If you want to use other ad-hoc settings, select another wireless network from the list. If you want to change ad-hoc settings click the Advanced Setting button. •Enter the wireless Network Name: Enter the SSID name you want (SSID is case-sensitive). - Page 47 Starting the program 1.Connect your machine to the network with a network cable. 2.Turn on the machine. 3.From the Windows Start menu, select All Programs > Samsung Printers > SetIP > SetIP. 4.Click on the icon (third from left) in the SetIP window to open the TCP/IP configuration window.
-
Page 48: Completing The Installation
After you have installed your Samsung wireless network printer, print another copy of the Network Configuration Report and keep it for future reference. You are now ready to use your new Samsung wireless printer on your network. If the wireless network seems to not be working, set all the network setting to the factory defaults and try again (See "Restoring factory... -
Page 49: Solving Other Problems
Vista, you might need to set the wireless connection setting every time you use the wireless machine. • You cannot use infrastructure mode and Ad-hoc mode at the same time for Samsung wireless network machines. • The machine is within the range of the wireless network. •... -
Page 50: Setting The Default Tray And Paper
Mac OS X (See "Using the Smart Panel program" on page 69). Or, if you are a Windows user, you can launch it from the Start menu, select Programs or All Programs > Samsung Printers > your printer driver name > Smart Panel. -
Page 51: Using The Power Saving Feature
Mac OS X (See "Using the Smart Panel program" on page 69). Or, if you are a Windows user, you can launch it from the Start menu, select Programs or All Programs > Samsung Printers > your printer driver name > Smart Panel. -
Page 52: Media Sizes Supported In Each Mode
•Using print media that does not meet these specifications may cause problems or require repairs. Such repairs are not covered by Samsung’s warranty or service agreements. •Make sure not to use the inkjet photo paper with this machine. It could cause damage to the machine. -
Page 53: Changing The Tray Size
Changing the tray size To load different sizes of paper, such as Legal-sized paper, you need to adjust the paper guides to extend the paper tray. To change the tray size to other size, you must adjust the paper length/width guides properly. 1. -
Page 54: Loading Paper In The Tray
•Do not use a paper with more than 6 mm (0.24 inch.) curl. 5. Close the paper cover. 6. Slide the tray back into the machine until it clicks. 7. Set the paper type and size for the tray ("Setting the paper size and type"... -
Page 55: Manual Feeding In The Tray
6. Insert the tray back into the machine. 7. To print in application, open an application and start the print menu. 8. Open Printing Preferences (See "Opening printing preferences" on page 60). 9. Press the Paper tab in Printing Preferences and select an appropriate paper type, size and source. -
Page 56: Printing On Special Media
guide. If the paper that you need to print is shorter than length 222 mm (8.74 inches), press and unlatch the guide lock in the tray, push the tray in manually. Adjust the paper length guide and paper width guide. •Do not push the paper width guides far enough to cause the materials to warp. -
Page 57: Envelopes
• CardStock: 105 to 163 g/m (28 to 43 lbs bond) cardstock. • Bond: 105 to 120 g/m (28 to 32 lbs bond) bond. • Archive: 70 to 90 g/m (19 to 24 lbs bond). If you need to keep the print-out for a long time, such as for archives. -
Page 58: Card Stock/Custom-Sized Paper
• Do not run a sheet of labels through the machine more than once. The adhesive backing is designed for only a single pass through the machine. • Do not use labels that are separating from the backing sheet or are wrinkled, bubbled, or otherwise damaged. -
Page 59: Samsung Easy Color Manager
This tool helps you to screen-capture, preview, scrap and print the screen of Windows Internet Explorer more easily, when you use the ordinary program. Click Start > All programs > Samsung Printers > Samsung AnyWeb Print > Download the latest version to link the website where the tool is available for the download. -
Page 60: Canceling A Print Job
4. Click Properties or Preferences. Using a favorite setting The Presets option, which is visible on each of the preferences tab except for the Samsung tab, allows you to save the current preferences for future use. To save a Presets item: 1. -
Page 61: Using Help
Then a pop-up window appears with information about that option's feature which is provided from the driver. If you want to search information via a keyword, click the Samsung tab in the Printing Preferences window, and enter a keyword in the input line of the Help option. -
Page 62: Printing On Both Sides Of The Paper (Manual
Printing on both sides of the paper (Manual) You can print on both sides of a paper (duplex). Before printing, decide how you want your document oriented. You can use this feature with Letter, Legal, A4, US Folio or Oficio sized paper (See "Print media specifications" on page 92). -
Page 63: Graphics Tab Options
6.When you have finished, click OK or Print until you exit the Print window. To stop printing the watermark, select None from the Watermark drop-down list. Editing a watermark 1.To change the print settings from your software application, access Printing Preferences (See "Opening printing preferences" on page 60). -
Page 64: Changing The Default Print Settings
Sound > Devices and Printers. -For Windows Server 2008 R2, select Control Panel > Hardware > Devices and Printers. 3.Select the your machine’s driver and right-click to open Properties. 4.In printer driver properties, select Device Options. 5.Select necessary options in the Printer Language drop-down list. -
Page 65: Printing To A File (Prn
printer item has a ► mark, you can select other printer drivers connected with the selected printer. Printing to a file (PRN) You will sometimes need to save the print data as a file. You can print the document to a file instead of routing it directly to a printer. The document is saved with the printer formating, such as font selection and color specifications, in a .prn file that can be printed on another printer. -
Page 66: Printing Multiple Pages On One Sheet Of Paper
Graphics The Graphics dialog provides options for selecting Quality and Color Mode. Select Graphics from the drop-down list under Orientation to access the graphic features. •Quality: This option allows you to select the printing resolution. The higher the setting, the sharper the clarity of printed characters and graphics. -
Page 67: Printing Files
4. Change the print job properties using the following four tabs displayed at the top of the window. •General: This option allows you to change the paper size, the paper type, and the orientation of the documents. It adds start and end banners, and changes the number of pages per sheet. -
Page 68: Using Syncthru™ Web Service
This tab allows you to maintain your machine by upgrading firmware and setting contact information for sending emails. You can also connect to Samsung website or download drivers by selecting the Link menu. •Firmware Upgrade: You can upgrade your machine’s firmware. -
Page 69: E-Mail Notification Setup
Click this icon in Linux. Or, if you are a Windows user, you can launch it from the Start menu, select Programs or All Programs > Samsung Printers > your printer driver name > Smart Panel. •If you have already installed more than one Samsung machine, first select the correct machine model you want in order to access the corresponding Smart Panel. -
Page 70: Changing The Smart Panel Program Settings
Opening the Unified Driver Configurator 1. Double-click the Unified Driver Configurator on the desktop. You can also click the Startup Menu icon and select Samsung Unified Driver > Unified Driver Configurator. 2. Click each button on the left to switch to the corresponding configuration window. -
Page 71: Ports Configuration
The printer control buttons are, as follows: •Refresh: Renews the available machines list. •Add Printer: Allows you to add a new machines. •Remove Printer: Removes the selected machine. •Set as Default: Sets the current selected machine as a default machine. •Stop/Start: Stops/starts the machine. -
Page 72: Cleaning A Machine
maintenance This chapter provides information about maintaining your machine and the toner cartridge. This chapter includes: • Printing a machine report • Cleaning a machine Printing a machine report You can print a configuration page to view current printer settings, or to help troubleshoot printer problems. -
Page 73: Storing The Toner Cartridge
Storing the toner cartridge Toner cartridge storage Toner cartridges contain components that are sensitive to light, temperature, and humidity. Samsung suggests users follow the recommendations to ensure the optimum performance, highest quality, and longest life from your new Samsung toner cartridge. -
Page 74: Use Of Non-Samsung And Refilled Toner Cartridge
Use of non-Samsung and refilled toner cartridge Samsung Electronics does not recommend or approve the use of non-Samsung brand toner cartridges in your printer including generic, store brand, refilled, or remanufactured toner cartridges. -
Page 75: Tips For Avoiding Paper Jams
troubleshooting This chapter gives helpful information for what to do if you encounter an error. This chapter includes: • Redistributing toner • Tips for avoiding paper jams Redistributing toner It is possible that colored images may be printed with incorrect colors due to flawed mixing of toner colors when one of the colored toner cartridges is low on toner. -
Page 76: Clearing Paper Jams
• Do not mix paper types in a tray. • Use only recommended print media ("Setting the paper size and type" on page 58). • Ensure that the recommended side of the print media is facing up in the tray. Clearing paper jams To avoid tearing the paper, pull the jammed paper out slowly and carefully. - Page 77 1. Gently pull the paper out the output tray. If you do not see the jammed paper or if there is any resistance when you pull, stop and go to the next step. 2. To remove the jammed paper, open the rear cover. 3.
-
Page 78: Solving Other Problems
Condition Turn the machine on/off. If the problem persists, The red error light is contact a service representative (See "Contact SAMSUNG worldwide" on page 94”). Power problems Click this link to open an animation about power problems. Troubleshooting_ 78 Suggested solutions... -
Page 79: Paper Feeding Problems
Condition Suggested solutions The machine is not • Plug in the power cord and press Power ( receiving power, button on the control panel. or the connection cable between the computer and the machine is not connected properly. • Disconnect the machine cable and reconnect it. -For Local Printing For Network (CLP-320N(K)/CLP-321N/CLP-325W(K)/... -
Page 80: Printing Problems
Printing problems Condition Possible cause The machine is not Check the power cord The machine receiving power. connections. does not print. The machine is not Select your machine as your selected as the default machine in your Windows. default machine. Check the machine for the following: •... -
Page 81: Printing Quality Problems
Condition Possible cause The machine cable Disconnect the machine cable and The machine is loose or defective. reconnect. Try a print job that you prints, but the have already printed successfully. text is wrong, If possible, attach the cable and garbled, or the machine to another computer incomplete. - Page 82 Condition Suggested solutions The toner might not adhere properly to this type of The top half of the paper. paper is printed lighter than the • Change the printer option and try again. rest of the paper Go to the Printing Preferences, click the Paper tab, and set the paper type to Recycled.
- Page 83 Condition Suggested solutions Background scatter results from bits of toner Background randomly distributed on the printed page. scatter • The paper may be too damp. Try printing with a fresh ream of paper. Do not open packages of paper until necessary so that the paper does not absorb too much moisture.
-
Page 84: Common Windows Problems
Condition Suggested solutions Character voids are white areas within parts of Character Voids characters that should be solid black: • If you are using transparencies, try another type of transparency. Because of the composition of transparencies, some character voids are normal. •... -
Page 85: Common Macintosh Problems
condition Suggested solutions This is a known bug in Ghostscript (until GNU Some color images Ghostscript version 7.05) when the base color come out all black. space of the document is indexed color space and it is converted through CIE color space. Because Postscript uses CIE color space for Color Matching System, you should upgrade Ghostscript on your system to at least GNU... -
Page 86: Available Supplies
How to purchase To order Genuine Samsung supplies, accessories and, maintenance parts, contact your local Samsung dealer or the authorized retailer where you purchased your machine. You can also visit www.samsung.com/supplies, select your country/region, and obtain information on calling for service. -
Page 87: Replacing The Imaging Unit
Samsung toner cartridge's quality or damages it can cause to the machine. Also service or repair required as a result of using non-genuine Samsung toner cartridges will not be covered under the machine warranty. 1. Turn the machine off, then wait a few minutes for the machine to cool. - Page 88 1. Turn the machine off, then wait a few minutes for the machine to cool. 2. Press the release button, completely open the front cover. 3. Grasp the handles on the toner cartridge and pull to remove the cartridge from the machine. 4.
-
Page 89: Replacing The Waste Toner Container
Each LED blinks red in a repeated order. Wait for about 1.5 minutes for your machine to get ready. Replacing the waste toner container When the life span of the waster toner container has expired, the Smart Panel program window appears on the computer, indicating the waste toner container needs to be replaced. -
Page 90: Environmental Specifications
• Hardware specifications • Environmental specifications • Electrical specifications • Print media specifications The specification values are listed below: specification are subject to change without notice: See www.samsung.com/printer for possible changes in information. Hardware specifications Item Height Dimension Depth Width... - Page 91 Item 110 volt models Power rating 220 volt models Average operating mode Power consumption Ready mode Power save mode Power off mode a. See the rating label on the machine for the correct voltage, frequency (hertz) and type of current for your machine. Description AC 110 - 127 V AC 220 - 240 V...
-
Page 92: Print Media Specifications
Print media specifications Type Size Letter Plain paper Legal US Folio Oficio JIS B5 ISO B5 Executive Monarch Envelope No. 10 No.9 6 3/4 Refer to the Plain Thick paper paper section Refer to the Plain Thin paper paper section Letter, A4 Labels PostCard... - Page 93 g. Recommended media: Glossy paper (Letter) for this machine by HP Brochure Paper (Product: Q6611A). Glossy paper (A4) for this machine by HP Superior Paper 160 glossy (Product: Q6616A). Specifications_ 93...
-
Page 94: Contact Samsung Worldwide
If you have any comments or questions regarding Samsung products, contact the Samsung customer care center. Country/Regio Customer Care Center 0800-333-3733 ARGENTINE 0-800-05-555 ARMENIA 1300 362 603 AUSTRALIA 0810-SAMSUNG (7267864, AUSTRIA € 0.07/min) 088-55-55-555 AZERBAIJAN 8000-4726 BAHRAIN... - Page 95 VENEZUELA VIETNAM www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.ru www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.ua www.samsung.com/ua_ru Contact SAMSUNG worldwide_ 95 Customer Care Center Web Site 8-10-800-500-55-500 www.samsung.com/kz_ru 0-800-100-5303 www.samsung.com 1 800 588 889 www.samsung.com...
- Page 96 glossary The following glossary helps you get familiar with the product by understanding the terminologies commonly used with printing as well as mentioned in this user’s guide. 802.11 802.11 is a set of standards for wireless local area network (WLAN) communication, developed by the IEEE LAN/MAN Standards Committee (IEEE 802).
- Page 97 DIMM Dual Inline Memory Module (DIMM), a small circuit board that holds memory. DIMM stores all the data within the machine like printing data, received fax data. DLNA The Digital Living Network Alliance (DLNA) is a standard that allows devices on a home network to share information with each other across the network.
- Page 98 Hard Disk Drive (HDD), commonly referred to as a hard drive or hard disk, is a non-volatile storage device which stores digitally-encoded data on rapidly rotating platters with magnetic surfaces. IEEE The Institute of Electrical and Electronics Engineers (IEEE) is an international non-profit, professional organization for the advancement of technology related to electricity.
- Page 99 Modified Modified READ (MMR) is a compression method recommended by ITU-T T.6. Modem A device that modulates a carrier signal to encode digital information, and also demodulates such a carrier signal to decode transmitted information. Modified Read (MR) is a compression method recommended by ITU-T T.4.
- Page 100 between nodes on a network. It also provides an authenticated Inter-process communication mechanism. SMTP Simple Mail Transfer Protocol (SMTP) is the standard for e-mail transmissions across the Internet. SMTP is a relatively simple, text-based protocol, where one or more recipients of a message are specified, and then the message text is transferred.
- Page 101 XML Paper Specification (XPS) is a specification for a Page Description Language (PDL) and a new document format, which has benefits for portable document and electronic document, developed by Microsoft. It is an XML-based specification, based on a new print path and a vector-based device-independent document format.
- Page 102 index adjusting tray size 50 booklet printing booklets buttons cancel 27 demo print 27 power 27 print screen 26 wps 27 change percentage of your document cleaning inside 72 outside 72 cleaning a machine control panel convention curled duplex printing (manual) printer driver 62 favorites settings, for printing features...
- Page 103 SyncThru Web Service general information 68 toner distributing 75 toner cartridge estimated life 74 handling instructions 74 non-Samsung and refilled 74 replacing the cartridge 86 storing 73 tray adjusting the width and length 53 turning on the machine understanding the control panel...