AUTOTERM COMFORT CONTROL User Manual page 9

Editing the timer
Set the time of day for heater to start:
• Set hours and confirm;
• Set minutes and confirm.
Set working duration of the heater.
Duration can be set from 30min to 720min* with increasing step of
5min.
Set days for heater to start, where:
• ED (Every Day) – heater starts every day of the
week;
• EW (Every Workday) – heater starts every day
from Monday to Friday;
• SEL (Select specific day) – heater starts only on
specified days, where:
1 – Monday
2 – Tuesday
Set the operation mode for air heaters:
• Heating mode
Set the operation mode for liquid heaters:
• Pre-heating mode
When all the parameters are set message "Saved" is shown on the display
and the timer is enabled automatically. Enabled timers can be seen on the
bottom part of the main screen. LED indicators will blink light green once
every 5sec when timer is enabled.
*up to 120min for liquid heaters
3 – Wednesday 5 – Friday
4 – Thursday 6 – Saturday
• Heat + Ventilation mode
7 – Sunday
• Ventilation mode
• ECO mode (only for FLOW 14D)
9