Troubleshooting; Transportation, Storage And Disposal - Husqvarna WT 15i Operator's Manual

Hide thumbs Also See for WT 15i:
Table of Contents

Advertisement

Available languages

Available languages

Troubleshooting

Problem
The LED on the product flashes and
the product does not start.
The LED on the product flashes dur-
ing operation.
The product does not move water
when it starts but the pump operates.
The product does not move water
when it starts and the pump does not
operate.
Low water flow from the machine.
The product can be used with a number of different
power cutters and core drills on the market.
Transportation of the product
Attach the product during transportation to prevent
transport damage and accidents.
Always stop the product and disconnect the power
cord before you move the product.
Always disconnect the battery before transportation.
Storage of the product
Keep the product in a locked area to prevent access
for children or persons that are not approved.
Keep the product in a dry area.
Make sure that the temperature is not lower than
-25°C (-77°F) and not higher than 50°C (122°F).
Disposal
Symbols on the product or the packaging of the product
indicate that this product cannot be handled as domestic
waste. It must be submitted to an appropriate recycling
station for the recovery of electrical and electronic
equipment.
Make sure to disconnect the propane tank and remove
the battery from the product before submitting to an
1572 - 001 - 21.12.2020
Troubleshooting
Cause
Battery is not charged.
Low battery voltage.
Air bubbles in the pump container.
Blocked filter in the pump holder.
Blockage in the pump or blocked fil-
ter.
Frozen water in the pump.
Blocked filter in the pump holder.

Transportation, storage and disposal

Solution
Charge the battery.
Charge the battery.
Wait 1 minute and start again.
Remove and clean the pump.
Remove and clean the pump.
Put the product in a warm location
and let the frozen water melt.
Remove and clean the pump.
This product is not recommended for high performance
products that use high water flow and high water
pressure, for example concrete chain saws.
appropriate recycling station. Submit the battery to an
appropriate recycling station.
By ensuring that this product is taken care of correctly,
you can help to counteract the potential negative impact
on the environment and people that can otherwise result
through the incorrect waste management of this product.
For more detailed information about recycling this
product, contact your municipality, your domestic waste
service or the shop from where you purchased the
product.
7

Advertisement

Table of Contents
loading

Table of Contents