Samsung NV30MP0000/SUK User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Laptop
  5. NV30MP0000/SUK
  6. User manual
Samsung NV30MP0000/SUK User Manual

Samsung NV30MP0000/SUK User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
V30 1.0
Notices
No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, mechanical photocopying, recording or
otherwise, without the prior written permission of the manufacturer.
The information within this manual is subject to change without notice.
The manufacturer shall not be held liable for technical or editorial errors or omissions
contained in herein; nor for incidental or consequential damages resulting from the
furnishing, performance or use of this material.
Microsoft Windows is a registered trademark of the Microsoft Corporation.
Product names mentioned herein are for identification purposes only, and may be
trademarks and/or registered trademarks of their respective companies.
Macrovision Statement
If your computer has a DVD drive and an analog TV Out port, the following
paragraph applies:
This product incorporates copyright protection technology that is protected by method
claims of certain U.S. patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Copyright 2003 All rights are reserved
Notices i

Advertisement

Table of Contents
loading

Related Manuals for Samsung NV30MP0000/SUK

Summary of Contents for Samsung NV30MP0000/SUK

  • Page 1 V30 1.0 Notices No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, mechanical photocopying, recording or otherwise, without the prior written permission of the manufacturer. The information within this manual is subject to change without notice. The manufacturer shall not be held liable for technical or editorial errors or omissions contained in herein;...

  • Page 2: Important Safety Information

    Important Safety Information Safety Instructions Your system is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that the safety instructions marked on the product and in the documentation are followed.

  • Page 3: Care During Use

    Do not put rechargeable batteries or products powered by non-removable rechargeable batteries in the garbage. Contact the Samsung Helpline for information on how to dispose of batteries that you cannot use or recharge any longer. Follow all local regulations when disposing of old batteries.

  • Page 4: Laser Safety

    Laser Safety All systems equipped with CD or DVD drives comply with the appropriate safety standards, including IEC 825. The laser devices in these components are classified as “Class 1 Laser Products” under a US Department of Health and Human Services (DHHS) Radiation Performance Standard.

  • Page 5: Regulatory Compliance Statements

    Regulatory Compliance Statements Wireless Guidance Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz Band, may be present (embedded) in your notebook system. The following section is a general overview of considerations while operating a wireless device.
  • Page 6 In environments where the risk of interference to other devices or services is harmful or perceived as harmful, the option to use a wireless device may be restricted or eliminated. Airports, Hospitals, and Oxygen or flammable gas laden atmospheres are limited examples where use of wireless devices may be restricted or eliminated.

  • Page 7: United States Of America

    United States of America Unintentional Emitter per FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 8: Fcc Part

    The FCC has set a general guideline of 20 cm (8 inches) separation between the device and the body, for use of a wireless device near the body (this does not include extremities). This device should be used more than 20 cm (8 inches) from the body when wireless devices are on.
  • Page 9 If the terminal equipment causes harm to the telephone network, the Telephone Company will notify you in advance that temporary discontinuance of service may be required. But if advance notice is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
  • Page 10 Canada Unintentional Emitter per ICES-003 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limitesapplicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioélectrique édicté...
  • Page 11 Telecommunications per DOC notice (for products fitted with an IC-compliant modem) The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operation, and safety requirements. The Department does not guarantee the equipment will operate to the users’...

  • Page 12: European Union

    European Union The following information is only applicable to systems labeled with the CE mark European Directives This Information Technology Equipment has been tested and found to comply with the following European directives: • EMC Directive 89/336/EEC with amending directives 92/31/EEC & 93/68/ EEC as per –...
  • Page 13 European States qualified under wireless approvals: Austria, Belgium, Denmark, Finland, France (with frequency Germany, Greece, Ireland, Italy, Luxembourg, The restrictions), Netherlands, Portugal, Spain, Sweden and the United Kingdom. Accept EU Iceland, Liechtenstein, Norway and Switzerland European States with restrictions on use: In France, the frequency range is restricted to 2446.5-2483.5 MHz for devices above 10 mW transmitting power such as wireless LAN.

  • Page 14: Using Your Documentation

    Using Your Documentation Congratulations on your purchase of a notebook computer with the Windows® XP operating system. Whether you are new to using a portable computer or are an experienced user, this user’s manual can help you get the most from your computer. Manual Documentation Conventions Information Icons Four icons and their associated messages appear in this manual.

  • Page 15: Touchpad Conventions

    CD-ROM Device Naming Convention In many installation programs you will have to get a program from the CD-ROM device. The program installation sequence assumes that the CD is drive d:\, however this is not always the case. The name of the CD-ROM drive is the letter following the letter assigned to your last HDD.

  • Page 16: Getting Started

    Getting Started Introducing Your Computer Front View LCD Latch LCD Panel LCD Panel Status Indicators Hot Keys (p15) (LED) (p17) Power Button Keyboard (p8) Status Indicators (LED) (p17) Touchpad Button Speaker Speaker Touchpad (p12) Scroll Wheel Getting Started 3...

  • Page 17: Right View

    Right View PCMCIA Card Slot (p32) CD Drive (Optional, p24 ) Hard Disk Compartment Left View Security Lock Port Serial Port Microphone Jack Battery Compartment Headphone / TV-Out Port S/PDIF Jack (S-VHS) 4 Users Manual...

  • Page 18: Back View

    Back View Modem 1394 Port (4 Pin) Port (p33) PS/2 Port LAN Port USB Ports (p34) (2.0) When you use a USB device, keep the USB connector side with USB mark ) downwards. Bottom View Monitor Port Parallel Port DC-In Port Fan Vent Hard Disk Screw Fan Vent...

  • Page 19: Turning The Computer On And Off

    Turning the Computer On and Off To turn on the computer 1. Insert the battery and connect the AC adapter according to the Installation Guide. 2. Slide the LCD latch to the right and open the LCD panel. 3. Press the power button. To turn off the computer 1.
  • Page 20 If the computer is not turned off properly due to a system error, press <Ctrl>+<Alt>+<Delete>. When [Windows Task Manager] dialog box appears, click Shut Down > Turn Off to turn off the computer. Your unsaved work may be lost/damaged. If <Ctrl>+<Alt>+<Delete> keys do not operate either, press the power button for more than 4 seconds to turn off the computer.

  • Page 21: Using The Keyboard

    Using the Keyboard Your computer has an 89-key keyboard. By pressing designated key combinations, you can have access to all the key functions of a full-sized keyboard. Function Although the layout of the keys on your computer’s keyboard is different from that on a desktop computer’s keyboard, the keyboard feels like a full-sized keyboard when you use it.

  • Page 22: Using The Numeric Keypad

    Do not allow liquid to drip into the keyboard or you may damage the keyboard. Using the Numeric Keypad Your keyboard includes a numeric keypad, which is a group of keys that you can set to type numbers and mathematical symbols, such as the plus sign. A number or symbol on the corner of each keypad key shows its numeric function.

  • Page 23: Using Special Function Keys

    Using Special Function Keys The function key activates special functions when it is pressed in combination with another keys. <Fn> Key Key Name Combinations <Esc/ > Rest <F2/ > Gauge <F4/ > LCD/CRT <F6/ > Mute <F7/ S/PDIF> S/PDIF <F10/ >...
  • Page 24 < > Brightness Up < > Brightness Down < > Volume Down < > Volume Up When you press a function key combination, the system sound may be temporarily muted. Makes the LCD screen brighter. Makes the LCD screen dimmer. Decreases the audio volume.

  • Page 25: Using The Touchpad

    Using the Touchpad In Windows, you always see a small graphical image on the screen that indicates the location where you can take the next action. This image is called a pointer, and is usually displayed in arrow shape ( ) or ‘I’...
  • Page 26 You can use various actions with your touchpad as described below. Action Move Click Double-Click Right-Click Drag Function Process Move the pointer Place your finger on the touchpad and slide your finger to a destination. Select an object, open a menu, or Place the pointer over an object, execute a button then press left touchpad button...
  • Page 27 Action Scroll Make sure to use your finger to move the pointer with the touchpad. Do not use any sharpened tool because it may damage your touchpad. 14 Users Manual Function Process Display upper/lower/left/right part Place your finger on the scroll of the content within a window wheel, and roll the wheel up or down.

  • Page 28: Hot Keys

    Hot Keys Internet Button Launches Internet Explorer. E-Mail Button Launches Outlook Express. User 1 Button You can launch a frequently used program by pressing the button. By default, Windows Calculator is configured to be launched when you press this button. User 2 Button By default, Windows Explorer is configured to be launched when you press User 2 button.
  • Page 29 Changing the Hot Key Setting Following example shows how to change the setting of User 1 button. 1. Double-click the Sens Keyboard icon ( 2. Click Browse in the User 1 item. In the models with wireless LAN installed, you cannot change the configuration of the User 2 button.

  • Page 30: Reading The Status Indicators

    Reading the Status Indicators Status indicators show the status of computer functions. Num Lock Turns on when the numeric keypad is activated. Caps Lock Turns on when all alphabet characters you type will be in upper case. Scroll Lock Turns on when it is set to scroll the screen up and down while the cursor position does not change in some applications.

  • Page 31: Adjusting Lcd Brightness

    Adjusting LCD Brightness There are 8 levels of LCD brightness (1: Dimmest ~ 8: Brightest). Press <Fn>+< brightness. When changed, the current LCD brightness is displayed on the top left corner of the LCD screen for a few seconds. Whenever you turn the system on or change the power source The brightness level changes according to the settings.

  • Page 32: Adjusting The Volume

    Adjusting the Volume To adjust using keyboard Press <Fn>+< > or <Fn>+< To adjust using volume control program Click the Volume icon( level. For advanced volume control options, double-click the Volume icon( the volume level in the volume control program. >...

  • Page 33: Introducing Windows

    Introducing Windows Understanding the Desktop The desktop is the working area on the computer. It consists of the large workspace and a taskbar at the bottom. Shortcut Icons Start Menu Start Button Start Button Taskbar Recycle Bin Language Bar 20 Users Manual Taskbar System Tray with Clock Opens the Start menu.

  • Page 34: Understanding The Start Menu

    Understanding the Start Menu The Start menu includes everything that is required to start Windows. From the Start menu it is possible to run a program, open a file, assign system users with Control Panel, receive support by clicking Help and Support, and search desired items from the computer or Internet by clicking Search.

  • Page 35: Understanding A Window

    Understanding a Window A window is the basic component in working with the computer. The My Computer window, which is a window for the computer's hard drive, will be used as an example here to show the basic composition of a window. Click Start >...

  • Page 36: Help And Support Center

    Help and Support Center Help and Support Center provides references and troubleshooting information regarding computer use. Click Start > Help and Support. Windows XP Tour You can tour elementary functions provided by Windows XP. Click Start > Tour Windows XP. Or click Start >...

  • Page 37: Using The Computer

    Using the Computer Using the CD Drive One of the following CD drives is installed in your computer. CD-ROM drive CD-RW drive DVD-ROM drive CD-RW/DVD-ROM Combo drive DVD Multi Drive To insert a CD 1. Push the eject button on the CD drive. 2.
  • Page 38 3. When the tray slides out, remove the CD from the tray. 4. Push the tray in gently until it clicks. If you remove the CD when the CD access LED is on, the disk and the data in it may be damaged. Emergency Eject Hole To eject a CD when the CD drive is not working or the computer is turned off, unfold a paper clip, and insert the unfolded end of the clip into the emergency...
  • Page 39 To use the Windows Media Player The Windows Media Player allows you to play audio and video files from the computer or the Internet. To launch the Windows Media Player, click Start > All Programs > Accessories > Entertainment > Windows Media Player. Features Playback Control Area To play a video CD...
  • Page 40 To write data on a CD (Option) If your computer has CD-RW functionality, you can copy data to a blank CD or create an audio CD. An additional CD writing program is supplied in an additional CD. For information about use, refer to the supplied manual. You cannot write to a CD that already has data in it.
  • Page 41 5. Click Write these files to CD in the CD drive window. 6. When the CD Writing Wizard appears, enter the CD label, and click Next. The data begins copying. 7. When copying is completed, a ‘completed’ message appears and the CD drive window opens automatically.
  • Page 42 Enjoying Home Theater (S/PDIF Port) Your computer supports 5.1 channel output, which is a basic function for home theater systems, and DVD drive (optional). It provides 3D surrounding sound and vivid screen. What is a home theater system? Home theater system usually consists of a TV, DVD, 5.1 channel speaker, and digital amp and provides a high-resolution screen (MPEG2) and 3D surrounding sound (Dolby 5.1 or DTS).
  • Page 43 Step 1. Connect digital amp, speakers, and TV to the computer 1. Connect a digital amp to the S/PDIF port of your computer. 2. Connect speakers to the digital amp. 3. To watch through a TV, connect the TV to the TV-out port of the computer and change the display setting to TV.
  • Page 44 Step 3. Enable S/PDIF on the DVD program To use 5.1 channel speakers, you need to install the Power DVD program from the DVD Installation CD provided with your computer, then change the settings as per the following. 1. Run Power DVD program and click the Settings icon ( 2.

  • Page 45: Using The Pcmcia Card Slot

    Using the PCMCIA Card Slot Various different functions can be added by inserting PCMCIA cards into the system. This system supports 16/32 bit, type I or II PCMCIA card types. The PCMCIA card slot does not support a ZV card or a PCMCIA III card. To insert a PCMCIA card 1.

  • Page 46: Connecting To The Internet

    Connecting to the Internet Connecting with a Modem Before Start: • Prepare a telephone line that is not digital. • Contact an internet service provider (ISP) for instructions on how to connect to and disconnect from the Internet. 1. Connect a telephone line to the computer’s modem port. 2.
  • Page 47 Connecting Through a Wired LAN 1. Connect a LAN cable to the computer’s LAN port. 2. Click Start > Control Panel. 3. Click Network and Internet Connections in the [Control Panel] window. 4. Click Network Connections in the [Network and Internet Connections] window. 5.
  • Page 48 6. On the General tab, select “Internet Protocol(TCP/IP)” and click Properties. 7. To use DHCP: On the General tab, select “Obtain an IP address automatically” and “Obtain DNS server address automatically”. Click OK. To use a static IP: On the General tab, select “Use the following IP address” and fill in the IP address, Subnet mask, Default gateway, Preferred DNS server, and Alternative DNS server fields.
  • Page 49 Connecting Through a Wireless LAN (Option) A wireless network (Wireless LAN) environment is a network environment that enables communication between multiple computers at home or a small-size office through wireless LAN devices. Using the wireless network connections between the systems, you can use normal network functions such as sharing of files, folders and printers.

  • Page 50: Connecting To An Access Point (Ap)

    networks, you can access the Internet through a computer that is connected to the Internet even if your computer is not directly connected to the Internet. For details, see “Connecting to computer-to-computer networks (peer-to-peer or ad hoc)” on page 38. Connecting to an Access Point (AP) This section describes how to connect to an AP.
  • Page 51 If the network key is not configured for the desired AP, select 'Allow me to connect to the selected wireless network, even though it is not secure’. Now you are connected to the AP, and you can access the network. Checking the connection status Move the mouse pointer over the Wireless Network Connection ( the taskbar, and the connection status is displayed.
  • Page 52 Step 1. Setting up a computer-to-computer network 1. Right-click on the Wireless Network Connection ( select View Available Wireless Networks. 2. Click Advanced. 3. On the Wireless Network tab, click Advanced. 4. Clear 'Automatically connect to non-default network' check box, if it is selected. Select 'Computer-to-computer (ad hoc) networks only', and click Close.
  • Page 53 6. Enter the network name (e.g. samsung), and unselect 'The key is provided for me automatically'. Enter the encryption key in the Network key field, and click OK. To prevent a network connection from an unauthorized user, it would be better to configure a network key (encryption key).
  • Page 54 7. Check that the configured network name (e.g. samsung) is in the ’Preferred networks’ item, and click OK. Now your wireless network setup has been completed. Step 2. Connecting to the configured computer 1. Right-click on the Wireless Network Connection ( select View Available Wireless Networks.
  • Page 55 If the network key is not configured in ”Connecting to computer-to-computer networks (peer-to-peer or ad hoc)” on page 38, select 'Allow me to connect to the selected wireless network, even though it is not secure'. The two computers are connected and are able to communicate with each other. When the computers are connected, the 'Wireless Network Connection' message is displayed for a short time over the Wireless Network Connection icon of the two computers.
  • Page 56 Step 2. Configuring the wireless network 1. Double-click the wireless LAN program icon ( (Or, click Start > All Programs > Samsung Wireless LAN > Client Manager.) 2. Click Add/Edit Configuration Profile from the Operation Status menu. 3. Click Add.
  • Page 57 If you do not know the network name when you connect to the AP, click Scan and select a network from the network name list displayed. To construct a computer-to-computer wireless network, both computers have to use the same network name. 6.
  • Page 58 10. Click Finish to exit from the [Edit Configuration] Window. 11. In the [Add/Edit Configuration Profile] window, click OK. Constructing a wireless network has been completed. Connecting to the Internet 45...

  • Page 59: Using Network Services

    Using Network Services While the computer is connected to the network, you can use network services to share files, folders, and printers. Using computer-to-computer wireless networks, you can access the Internet through a computer that is connected to the Internet even if your computer is not directly connected to the Internet.
  • Page 60 Step 1. Configuring Sharing 1. Right-click the target file or folder to share in My Computer, and select Sharing and Security. 2. Click 'IF you understand the security risks but want to share files without running the wizard, click here'. It has the same security effect as that of the 'Network Setup Wizard'.

  • Page 61: Sharing Printers

    Step 2. Using Shared Files or Folders This section describes how to access shared files or folders if your computer is a member of the same workgroup. 1. Click Start > My Computer. Under Other Places, click My Network Places in your computer.
  • Page 62 Step 1. Configuring Printer Sharing 1. From the computer connected to the printer, click Start > Printers and Faxes. 2. Right-click the printer you want to share, and click Sharing. 3. Select 'Share this printer', enter a share name for the shared printer, and click OK. 4.
  • Page 63 5. Select 'Browse for a printer', and click Next. 6. Select the workgroup or computer, select the desired printer, and click Next. If you cannot find the desired printer, try again after a while. 7. Read the warning about a shared printer, and click Yes to install the shared printer. 8.

  • Page 64: Sharing An Internet Connection

    Sharing an Internet Connection Using computer-to-computer (peer-to-peer) network connections, you can access the Internet through a computer connected to the Internet even if your computer is not directly connected to the Internet. To share an Internet connection, the computers should be connected to a computer-to-computer (peer-to-peer) wireless network.
  • Page 65 If the computer is connected to the Internet through a wired LAN, select 'Local Area Connection'. 3. On the Advanced tab, select 'Allow other network users to connect through this computer's Internet connection', and click OK. Step 2. Checking the Shared Internet Connection. When the Internet connection sharing configuration has been completed, the network icon in the Network Connections window is displayed as follows: Click Start >...

  • Page 66: Customizing Your Computer

    Customizing Your Computer Using System Setup The System Setup (BIOS) program enables you to configure your computer hardware and set security and power-savings options. The settings you choose are stored in battery-maintained CMOS memory that saves the information even when the computer’s power is turned off.

  • Page 67: Starting System Setup

    Starting System Setup To start System Setup, turn on your computer and then press <F2> and hold until the System Setup screen appears. Menu Main Advanced Security Boot Exit To open the menu you need to use, use the left or right arrow keys to select the menu name.

  • Page 68: Changing Booting Priority

    Changing Booting Priority You can select the booting priority among the devices such as the hard drive, CD-ROM drive, etc. The following example describes how to configure the hard drive as the first booting device when the CD-ROM drive is configured as the first booting device by default.

  • Page 69: Setting The User Password

    Do not lose or forget your password. If you have forgotten your password, contact the Samsung service center. 1. Select the Security menu in the System Setup. To enter System Setup, see “Starting System Setup” on page 54.

  • Page 70: Deactivating The Password

    Activating the Booting Password Before activating the booting password, the supervisor password must have been configured. Set the Password on boot option to [Enabled]. From now on, system booting will not proceed without the password. Activating the Hard Disk Drive Password Activating the hard disk drive password prevents the currently installed hard disk drive from being used in other systems.
  • Page 71 Configuring Resolution and Colour Depth Screen resolution is the number of pixels displayed on the screen. High resolution makes the overall screen area large, although individual items appear small. Colour quality is determined by the number of bits used to represent a pixel on the screen.

  • Page 72: Using External Display Devices

    Using External Display Devices Using external display devices such as a monitor, projector, TV, etc allows you to view screen images alternatively or simultaneously on each device. You can also split a screen into two display devices, or view different images on each display device. Using external display devices is especially useful when you are giving a presentation or watching a movie through your TV.
  • Page 73 3. Click the monitor '2' icon, select the 'Extend my Windows desktop onto this monitor' check box, and then click Apply. 4. When the configuration is complete, click OK on the left side of Troubleshoot. The primary display device(the LCD) is indicated as '1', and the secondary display device is indicated as '2'.
  • Page 74 If the screen of the secondary display device is displayed at 640x480 pixels, with 256 colors, change the settings to the desired screen resolution and color quality in the [Display Properties] window. Deactivating Dual View Mode Click the monitor '2' icon, clear the 'Extend my Windows desktop onto this monitor' check box, and then click Apply.

  • Page 75: System Management

    System Management Using Power Management Options Your computer includes Power Management options that can help the battery charge last longer and extend the life of the battery. Power-management options will slow down or shut off system components when the components are not being used. Power management may slow down system performance.
  • Page 76 3. Click the Power Schemes tab to display the basic power management options. 4. Select the time that you wish each of the following actions to occur in Battery and AC power mode. • Turn off monitor • Turn off hard disks •...
  • Page 77 If You Reinstall Windows: You should re-establish hibernate in power options by opening Options Properties window and click on the Hibernate tab then click “Enable Hibernation”. Frequent Interruptions: If you experience frequent interruptions, you might also consider putting your computer into automatic hibernation after a specified number of minutes using the power management options.
  • Page 78 Advanced Power Management Schemes This section discusses the advanced power management schemes. There are two buttons that you can use to manually conserve power. To enter the power management window complete the following: 1. Click Start > Control Panel > Performance and Maintenance. 2.

  • Page 79: Using The Battery

    Using the Battery Please refer to the following instructions when running the computer on battery power without connecting the AC power. Please read the instructions on the battery before use. Please refer to the system operation environment (p95) of this manual and operate and store the battery at room temperature.

  • Page 80: Monitoring The Battery Charge

    Monitoring the Battery Charge To monitor in control panel Click Start > Control Panel > Performance and Management > Power Options > Power Meter tab. Power source and remaining battery charge are displayed. Using the battery Battery is an expendable supply, so when you use it for a long time, the capacity/battery life is shortened.

  • Page 81: Battery Calibration

    Battery Calibration Calibrating your battery once a month is one of the recommended methods of increasing your computer’s battery life. To calibrate the battery complete the following steps: Calibration Notes: You should start the battery calibration process with a fully charged battery, battery status LED is green.

  • Page 82: Using The Security Lock Port

    Using the Security Lock Port The security lock is a device used to physically 'fix' the system when using it in a public place. The locking device needs to be purchased separately. The shape and methods of use may differ depending on the manufacturer. Please refer to the manual provided with the security lock for proper use.

  • Page 83: Replacing The Hard Disk Drive

    Replacing the Hard Disk Drive The procedures for replacing the hard disk will be described below. 1. Turn off the computer. 2. Using a screwdriver, remove the screw securing the hard disk, and pull out the hard disk bracket. 3. Remove the 4 screws securing the hard disk to the bracket and remove the hard disk.
  • Page 84 5. Insert the bracket into the hard disk compartment, and secure it using the screw. After replacing the hard disk Referring to ”Reinstalling Windows XP” (p 92), reinstall Windows, and reinstall the drivers and programs referring to ”Reinstalling Software” (p 90). System Management 71...

  • Page 85: Tips For Using Your Computer

    Tips for Using Your Computer The following information helps you avoid potential problems as you use your computer: Do not try to disassemble your computer. Opening the system chassis voids your warranty. Only an authorised manufacturer service center can replace or add any parts inside the chassis.

  • Page 86: Handling Spills

    Travelling with Your Computer Air Travel If you are travelling by air, follow these tips: • Take the computer with you as carry-on luggage. Do not check the computer with your baggage. • Allow the computer and disks to go through the X-ray security devices. Do not hand-carry disks through the walk-through metal detectors, which can cause loss of data.

  • Page 87: Storing The Computer For Long Periods

    Storing the Computer for Long Periods If possible, leave the power cord connected to the computer and an electrical outlet when the computer is not in use. This extends the life of the battery and keeps the battery fully charged. If you will not be using the computer for a long period of time (a month or more), you should charge the battery until it is completely full.

  • Page 88: Troubleshooting

    To run Norton AntiVirus proceed as follows: Click Start > All Programs > Norton AntiVirus > Norton AntiVirus 2003. The Norton Antivirus Subscription on your Samsung notebook will expire within 3 months. It is your responsibility to update the virus definitions, and renew subscription with Symantec when the subscription expires.
  • Page 89 System Recovery Precaution: Before you start restoring your windows operating system insure you backup all data on your hard drive. Samsung is NOT responsible for any data loss. 76 Users Manual...

  • Page 90: Questions And Answers

    Questions and Answers This section provides information on possible problems, solutions and other references for system use. Windows Related Q1 The system does not shutdown properly. When the system does not shutdown normally, press and hold the Power button until the system manually shuts off. If the Power-Saving Mode is configured into the Power button, press and hold for more than 4 seconds to shut the system off.

  • Page 91: Display Related

    Display Related Q1 The LCD screen is blank. Adjust the LCD screen brightness. Use the <Fn>+<F10/ keys. Q2 In DOS mode, changing the full screen DOS mode by pressing <ALT+Enter> key displays a broken image for a short period. The DOS mode which supports 2 Byte characters such as Korean and Japanese runs in graphic not in text mode.

  • Page 92: Modem Related

    Modem Related Q1 I cannot hear the modem sound. Check that the telephone line is properly connected to the modem. Check that the modem driver is installed properly. Click Start > Control Panel > Performance and Maintenance > System. Select Hardware tab > Device Manager > Modems in the System Properties window, and check if there is a yellow exclamation mark on the installed modem icon.
  • Page 93 - Using an AT command As an initialization command, use the command, ATX3. Otherwise, enter the ATX3 command manually before making a call. It can correct this problem by skipping the dial tone check step. - Configuring the Modem through the Control Panel Click Start >...
  • Page 94 Under See Also, click Phone and Modem Options. In the Modems tab, select the installed modem, and click Properties. In the Power Management tab of the Modem Properties window, select the "This device activates the computer in power saving mode" check box, and click OK. The above setting enables the modem to turn on the system and receive a fax when in power saving mode.

  • Page 95: Wired Lan Related

    Wired LAN Related Q1 <Wake On LAN> function <Wake On LAN> is a function that activates the system in rest mode when a signal (such as ping or magic packet commands) arrives from network (wired LAN). To use <Wake On LAN> function: Click Start >...

  • Page 96: Wireless Lan Related

    Wireless LAN Related Q1 The Wireless LAN device is operating properly, but I cannot connect to the Internet or to another computer. This is due to an incorrect configuration, or a configuration error. Check the following check lists: If you are using a computer-to-computer (Peer-to-Peer) network connection, check that the name of the configured network (SSID) is correct.
  • Page 97 WPA Q815485 patch provided by Microsoft requires 802.11x, RADUIS, and authentication server. Also the patch requires the AP and the driver to support the patch. The current version of the driver does not support the WPA function. Click Start > Control Panel > Add or Remove Programs. If you can find the Q815485 patch in the [Add or Remove Programs] window, uninstall the patch before use.
  • Page 98 - If you are using Windows 2000 and the network is not scanned in the [Status] window of Client Manager program, click File > Enable Wireless Network. Check if the wireless LAN card is recognized. If "There is no wireless network card driver installed. Communication is unavailable."...
  • Page 99 Q7 When connecting to a computer-to-computer (Peer-to-Peer) network, I cannot connect to another computer connected to the same computer-to- computer network. Make sure that the security settings and network name of the computer-to- computer (Peer-to-Peer) network is correct. Check the TCP/IP properties of the computers to be connected through the computer-to-computer (Peer-to-Peer) network.
  • Page 100 In Windows XP, this may be caused by selecting the ’Use IEEE 802.1x network authentication’ option when IEEE 802.1x authentication is not available. Check the properties of the AP in the wireless network settings. If the ’Use IEEE 802.1x authentication in this network’ option is selected, deselect the option on the Authentication tab.

  • Page 101: Games And Programs Related

    Games and Programs Related Q1 When I pressed <Fn>+<F4/ playing a 3D game, the computer does not operate. Do not press <Fn>+<F4/ a system error. Q2 When I pressed <Fn>+<F4/ playing a game, the screen is not displayed properly. This problem may occur in some games. Use <Fn>+<F4/ launching a game, and not while playing the game.
  • Page 102 Press <Fn>+<F4/ > to change the display setting to Dual Display mode, then play the game. If above method does not solve the problem, change the setting to display only on the LCD. Troubleshooting 89...

  • Page 103: Reinstalling Software

    Reinstalling Software If you have reinstalled the Windows operating system, or the system and program do not operate properly, you can re-install the driver and program using the system software CD. The drivers and programs included in the system software CD are listed in the D:\ReadMe.htm file.

  • Page 104: Installing Programs

    Installing programs 1. In the initial screen, click Application Installation. 2. Click Standard installation in the program installation screen (standard installation is recommended). • Standard installation: Installs and recovers programs to the state of shipment. • User installation: You can select the program installation location, and other options for the program installation.

  • Page 105: Reinstalling Windows Xp

    Reinstalling Window may delete the data on the hard disk drive such as files, programs, etc. In order to minimize damage from data loss, please remember to always back up data. Samsung Electronics is not liable in the case of data loss, please consult your warranty statement for clarification.
  • Page 106 3. The description for the standard installation appears. Click Yes. The installation starts, and the system will be restarted after a while. 4. After the system has restarted, the message ’Press any key to boot from CD’ appears. Do not press any key at this time. After a while the partition configuration screen appears.
  • Page 107 If You Cannot Run Windows If you cannot run Windows, you have to boot the system with the system recovery CD, and reinstall Windows. If you boot the system from the system recovery CD, you can install Windows only with the user installation option. You cannot install with the standard installation option.

  • Page 108: System Specification

    * Please refer to the product catalog or consult your product provider for availability when purchasing optional accessories for this system. The main memory socket is within the computer. To add or replace memory, contact a Samsung service center. (operation) : 20% ~ 80% Remarks...

  • Page 109: Product Specification

    Wireless LAN Specification (Optional) Product Specification Item Physical Specifications Power Specification Network Specifications Radio Specifications RF Band Support Channels Device Modulation Scheme Standard Output Power Transmission Rate Antenna Type 96 Users Manual Detailed Specifications Dimensions (Width X Height) 59.75 X 50.95 mm operation temperature and Same as system operation humidity...
  • Page 110 Regulatory Notice for Channel Use in France The number of channels that can be used for wireless LAN differs from country to country. In France however, use only 4 channels (channel 10, 11, 12, 13) when using wireless networks. • Standard: IEEE 802.b •...
  • Page 111 Abbreviations A ..Amperes AC ..Alternating current ACPI ..Advanced Configuration and Power management Interface APM ..Advanced Power Management ATA.
  • Page 112 ISA ..Industry Standard Architecture KB ..Kilobytes kg ..Kilograms LAN..Local-area network lb..
  • Page 113 Glossary AC adapter The AC (or alternating current) adapter regulates current coming into your computer from the wall outlet. The current at the wall outlet is alternating current and needs to be changed by the adapter to DC (direct current) before your computer can use it for power.
  • Page 114 CardBus CardBus technology enables the computer to use 32-bit PC Cards. Hardware in the computer and the Windows operating system provide support for the 32-bit cards. The voltage of 32-bit cards (3.3 volts) is lower than that of 16-bit cards (5 volts).

  • Page 115: Hard Drive

    Hard drive Also called fixed disk. A hard drive is connected to the computer and can be installed or removed. Data written to a hard drive remains until it is overwritten or corrupted. The 2.5-inch hard drive in your computer was designed for use in a notebook computer.
  • Page 116 PC Card PC Card stands for personal computer card. The Personal Computer Memory Card International Association (PCMCIA) defines the standards used to develop all PC Cards. PC Card types include: modems, Ethernet adapters, SCSI adapters, ATA cards, and memory cards. PC slot The PC slot is the hardware slot in the computer where the PC Card is placed.
  • Page 117 Shadow RAM A write-protected area of RAM that contains a copy of the BIOS. As the computer boots, the BIOS is copied from its permanent location in ROM to RAM. The BIOS can be executed much faster in RAM than in ROM. The BIOS remains in shadow RAM until you turn off the computer.

  • Page 118: Using Windows 2000

    Using Windows 2000 Samsung notebook provides Windows XP or 2000 as operating system depending on the product model. Because the use of Windows XP is similar to Windows 2000, the same User Guide (Online Manual) is used regardless of operating system installed on your notebook.

  • Page 119: Reinstalling Windows 2000

    Introducing Windows Descriptions presented in ”Introducing Windows” (p 20) are applicable only to Windows XP. For Windows 2000, location of menus, shape of icons and some uses may differ from those of Windows XP. To Playback Audio or Video CD Just insert your audio or video CD into your CD drive.

This manual is also suitable for:

Nv30Nv30mp041b/sukNv30mp0350/sukNv30mp04vk/suk

Table of Contents