Wireless Network (Wlan) Related - Samsung NP-R40P User Manual


Click Start > Control Panel > Network and
Internet > Network and Sharing Center >
Manage Network Connections.

Right-click on the Wireless Network Connections
and select Disable.
Q
When I am connected to a 100Mbps/1Gbps wired
LAN and the computer exits Sleep/hibernation
mode, a message appears informing you of a
connection to a 10Mbps/100Mbps wired LAN.
A When the computer exits standby/hibernate mode,
restoring the network takes about 3 seconds.
When the network is restored, it operates at
100Mbps/1Gbps.
Q
How can I use the maximum network
performance?
A Set up the following options to use the maximum
network performance.

Click Start > Control Panel > System and
Maintenance > Device Manager.

Select Network Adapter and then Realtek
RTL8139/810x Family Fast Ethernet NIC.
Right-click over the selection and select
Properties from the pop-up menu.

Select Properties in the Advanced tap and
select Optimal Performance. Set the value
item to Enable.

Click the OK button.

Wireless Network (WLAN) Related

Q
I cannot find an AP.
A Verify whether the Wireless LAN LED is on.
If it is turned off, turn it on by pressing the Wireless
LAN On/Off button (Fn + (
Q
The Wireless LAN device is operating properly,
but I cannot connect to the Internet or to another
computer.
► This is due to an incorrect configuration, or a
configuration error. Check the following:
A1 If you are using a computer-to-computer (Ad Hoc)
network connection, check that the name of the
configured network (SSID) is correct.
A2 If you are using a network key (encryption key),
you have to use the same network key for an AP
(Access Point) or a computer-to-computer network
(Ad Hoc). The network key of the AP is configured
in the AP management program. Ask your network
administrator or AP manager for more detailed
information.
164
)).