Samsung NP-Q1 User Manual (Vista) User Manual page 93

5
Select Internet Protocol Version 4
(TCP/IPv4) from the Networking tab
and click Properties.
■ The LAN device driver may differ
depending on your LAN device
model.
■ To add a network component,
click Install in the screen shown
in the figure above. You can add
clients, services, and protocols.
6
Configure the IP settings.
When using DHCP, select Obtain an
IP address automatically. To use
a static IP address, select Use the
following IP address, and set the IP
address manually.
When not using DHCP, ask your
network administrator for the IP
address.
7
When you have completed the set-
tings, click the OK button.
The network settings have been com-
pleted.
93