Page 1 G15/G16 User Guide...
Page 2: Table Of Contents
Chapter 1. Getting Started Product Features Before You Start Contents Safety Precautions Proper Posture During Computer Use Important Safety Information Replacement Parts and Accessories Regulatory Compliance Statements WEEE SYMBOL INFORMATION Overview Front View Status Indicators Right View Left View Back View Bottom View Turning the Computer On and Off Turning the computer on...
Page 3: Product Features
Product Features Much More Excellent Performance than Notebook Computer. ■ Bright and Sharp 17 Inch Wide LCD ■ Spacious Large Capacity Storage ■ Low-Noise, Low-Heating ■ Wireless LAN Support More Efficient Space Utilization than a Desk-Top Computer ■ Space Saving and Tidy Line Arrangement ■ All-in-One type that does not need additional connecting ■ Easy to Move The items marked with this symbol are optional items that are supported depending on the computer model.
Page 4: Before You Start
Before You Start Before reading the User Guide, first check the following information. User Guide Information This product is supplied with an Installation Guide, and a User Guide. You can even more easily and conveniently use the computer by using any of the guides depending on your needs. Installation Guide This guide is provided so that you can conveniently refer to this guide when using the computer for the first time after purchasing it. This document includes the computer components and the connection procedures. User Guide The document you are currently reading is the User Guide. You can read it by double-clicking the icon on the Desktop. This document includes the computer functions, how to use the functions, and how to use the program. Utilizating the User Guide  Be sure to read the Safety Precautions before using the computer.
Page 5 Start > All This represents a menu path to run a Programs > program. Samsung > User Click the Start button and then select All Guide > User Programs > Samsung > User Guide > Guide User Guide in this order from the menu. Copyright © 2007 Samsung Electronics Co., Ltd. Samsung Electronics Co., Ltd. owns the copyright of this manual.
Page 6: Contents
User Account Changing Resolution and Color Chapter 4. Using the Network Wired Network Wireless Network Connecting to Wireless LAN Connecting to computer-to-computer networks (peer-to-peer or ad hoc) Wireless Network Setup Using the Wireless LAN Setup Program Using Samsung Network Manager Perform Network Settings Using the network after moving location Sharing Internet Access Checking Network Status Connecting with a Modem Chapter 5. Using Applications Introducing Programs CyberLink PowerDVD Samsung Update Plus...
Page 7: Safety Precautions
Safety Precautions For your security and to prevent damage, please read the following safety instructions carefully. Warning Failing to follow instructions marked with this symbol may cause personal injury and even fatality. Installation Related Do not install the product in places exposed to humidity such as a bathrooms. There is a danger of electric shock. Use the product within the operating conditions specified in the Manufacturers User Guide. Keep the plastic bags out of the reach of children. There is a danger of suffocation. Keep a distance of 15cm or more between the computer and the wall and do not place any objects between them.
Page 8 If the power cord or power outlet makes a noise, disconnect the power cord from the wall outlet and contact a service center. There is a danger of electric shock or fire hazard. Do not use a damaged or loose mains plug or power cord or power outlet. There is a danger of electric shock or fire hazard.
Page 9 If water or another substance enters the power input jack, AC adapter or the computer, disconnect the power cord and contact the service center. Damage to the device within the computer may cause electric shock or fire hazard. Battery Usage Related Keep the battery out of the reach of infants and pets, as they could put the battery into their mouths.
Page 10 Do not place any container filled with water or chemicals over or near the computer. If water or chemicals enter the computer, this may cause fire or electric shock. If the computer is broken or dropped, disconnect the power cord and contact a service center for a safety check. Using a broken computer may cause electric shock or fire hazard. Avoid direct sunlight when the computer is in an air-tight location such as inside a...
Page 11 Upgrade Related Shut down the computer and disconnect all cables before disassembling the computer. If there is a modem, disconnect the phone line. If you are using a notebook computer, make sure to remove the battery. Failing to do so, may cause electric shock. Custody and Movement Related Follow the instructions for the relevant location (e.g.
Page 12 Do not throw or disassemble the battery and do not put it into water. This may cause an injury, fire or explosion. Use only a battery authorized by Samsung Electronics. Failing to do so may cause an explosion. Avoid contact with metal objects such as car keys or clips when keeping or carrying a battery.
Page 13 Do not place a candle, lighted cigar, etc. over or on the product. There is a danger of fire. Make sure to have the product tested by a safety service engineer after repairing the product. Authorised Samsung Repair Centers will carry out safety checks after a repair. Using a repaired product without testing it for safety might cause electric shock or fire. In case of lightning, immediately turn the system off, disconnect...
Page 14 Make sure to close the computer cover before connecting the power after a reassembly. There is a danger of electric shock if your body touches an internal part. Use parts authorized by Samsung Electronics only. Failing to do so, may cause fire or damage the product. Never disassemble or repair the product by yourself. There is a danger of electric shock or file. To connect a device that is not...
Page 15 Custody and Movement Related When moving the product, turn the power off and separate all connected cables first. The product might be damaged or users may trip over the cables. For long periods of not using the notebook computer, discharge the battery and preserve as it is detached. The battery will be preserved at its best condition.
Page 16: Proper Posture During Computer Use
Proper Posture During Computer Use Maintaining a proper posture during computer use is very important to prevent physical harm. The following instructions are about maintaining a proper posture during computer use developed through human engineering. Please read and follow them carefully when using the computer. Otherwise, the probability of (RSI: Repetitive Strain Injury) from repeated operations may increase and serious physical harm may be caused. The instructions in this manual have been prepared so that they can be applied within the coverage of general users. If the user is not included in the coverage, the recommendation is to be applied according to the user’s needs. Since this is commonly applied to Samsung Computers, some figures may differ from actual ones. Proper Posture Adjust the heights of desks and chairs appropriate to your height. The heights are to be adjusted so that your arm forms a right angle when you place your hand over the keyboard while sitting down on a chair. ■ Adjust the height of chair so that your heel is comfortably placed on the floor. ■ Do not use the computer while you are lying down, but only while you are sitting down. ■ Do not use the computer on your lap. If the computer temperature increases, there is a danger of burning yourself. ■ Work while keeping your wrist straight.
Page 17 Eye Position Keep the monitor or LCD away from your eyes by at least 50cm. ■ Adjust the height of the monitor and the LCD screen so that its top height is equal to or lower than your eyes. ■ Avoid setting the monitor and LCD excessively bright. ■ Keep the monitor and LCD screen clean. ■ If you wear glasses, clean them before using the computer. ■ When entering contents printed on a paper into the computer, use a static paper holder so that the height of the paper is almost equal to that of the monitor. Hand Position Keep your arm at a right angle as shown by the figure. ■ Keep the line from your elbow to your hand straight.
Page 18 Volume Control (Headphones and Speakers) Check your volume first to listen to music. Click your volume!! ■ Check if the volume is too loud before using headphones. ■ It is not recommended using headphones for long periods of time. Use Time (Break Time) ■ Take a break for 10 minutes or more after a 50-minute period when working for more than one hour. Illumination ■ Do not use the computer in dark locations. The illumination level for computer use must be as bright so for reading a book. ■ Indirect illumination is recommended. Use a curtain to prevent reflection on the LCD screen. Operation Condition ■ Do not use the computer in hot and humid locations. ■ Use the computer within the allowed temperature and humidity range specified in the User Guide.
Page 19: Important Safety Information
Important Safety Information Safety instructions Your system is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that the safety instructions marked on the product and in the documentation are followed. Always follow these instructions to help guard against personal injury and damage to your system. Setting Up your System ■ Read and follow all instructions marked on the product and in the documentation before you operate your system. Retain all safety and operating instructions for future use. ■ Do not use this product near water or a heat source such as a radiator. ■ Set up the system on a stable work surface. ■ The product should be operated only with the type of power source indicated on the rating label. ■ Ensure that the electrical outlet you are using to power your equipment is easily accessible in case of fire or short circuit. ■ If your computer has a voltage selector switch, make sure that the switch is in the proper posi-tion for your area. ■ Openings in the computer case are provided for ventilation. Do not block or cover these openings. Make sure you provide adequate space, at least 6 inches (15 cm), around the system for ventilation when you set up your work area. Never insert objects of any...
Page 20 Care During Use ■ Do not walk on the power cord or allow anything to rest on it. ■ Do not spill anything on the system. The best way to avoid spills is to not eat or drink near your system. ■ Some products have a replaceable CMOS battery on the system board. There is a danger of explosion if the CMOS battery is replaced incorrectly. Replace the battery with the same or equivalent type recommended by the manufacturer. ■ When the computer is turned off, a small amount of electrical current still flows through the computer. To avoid electrical shock, always unplug all power cables, remove the battery and modem cables from the wall outlets before cleaning the system. ■ Unplug the system from the wall outlet and refer servicing to qualified personnel if: – The power cord or plug is damaged. – Liquid has been spilled into the system. – The system does not operate properly when the operating instructions are followed. – The system was dropped or the casing is damaged. – The system performance changes. The Instruction On Safety Operation of NotePC When installing and operating devices please refer to safety requirements in the user guide. Devices can be used only with the equipment specified in the technical specifications of the devices.
Page 21: Replacement Parts And Accessories
Replacement Parts and Accessories Use only replacement parts and accessories recommended by manufacturer. To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord. Do not use this product in areas classified as hazardous. Such areas include patient care areas of medical and dental facilities, oxygen rich environments, or industrial areas. Battery Disposal To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord. Contact the Samsung Helpline for information on how to dispose of batteries that you cannot use or recharge any longer. Follow all local regulations when disposing of old batteries. THERE IS A RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Laser Safety All systems equipped with CD or DVD drives comply with the appropriate safety standards, including IEC 60825- 1. The laser devices in these components are classified as “Class 1 Laser Products” under a US Department of Health and Human Services (DHHS) Radiation Performance Standard. Should the unit ever need servicing, contact an authorized service location. Laser Safety Note: ■ Use of controls or adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure. To prevent exposure to laser beams, do not try to open the enclosure of a CD or DVD drive. Class 1M laser radiation when operating part is open.
Page 22: General Requirements
Connect and Disconnect the AC adapter The socket-outlet shall be installed near the equipment and shall be easily accessible. Do not unplug the power cord out by pulling the cable only. Power Cord Requirements The power cord set (wall plug, cable and AC adapter plug) you received with your computer meets the requirements for use in the country where you purchased your equipment. Power cord sets for use in other countries must meet the requirements of the country where you use the computer. For more information on power cord set requirements, contact your authorized dealer, reseller, or service provider. General Requirements The requirements listed below are applicable to all countries: ■ The length of the power cord set must be at least 6.00 feet (1.8m) and a maximum of 9.75 feet (3.0m).
Page 23: Regulatory Compliance Statements
Regulatory Compliance Statements Wireless Guidance Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz Band, may be present (embedded) in your notebook system. The following section is a general overview of considerations while operating a wireless device. Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections). The wireless devices in your system are only qualified for use in the countries identified by the Radio Approval Marks on the system rating label. If the country you will be using the wireless device in, is not listed, please contact your local Radio Approval agency for requirements. Wireless devices are closely regulated and use may not be allowed. The RF field strength of the wireless device or devices that may be embedded in your notebook are well below all international RF exposure limits as known at this time. Because the wireless devices (which may be embedded into your notebook) emit less energy than is allowed in radio frequency safety standards and recommendations, manufacturer believes these devices are safe for use. Regardless of the power levels, care should be taken to minimize human contact during normal operation. As a general guideline, a separation of 20 cm (8 inches) between the wireless device and the body, for use of a wireless device near the body (this does not include extremities) is typical. This device should be used more than 20 cm (8 inches) from the body when wireless devices are on and transmitting. (This Statement is not applicable to UMPC(Ultra Mobile PC) such as PDA, Portable PC.) This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter except the installed Bluetooth transmitter. Some circumstances require restrictions on wireless devices. Examples of common restrictions are listed below:...
Page 24 Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations ■ require wireless devices to be turned off while traveling in an airplane. 802.11B (also known as wireless Ethernet or Wifi) and Bluetooth communication devices are examples of devices that provide wireless communication. In environments where the risk of interference to other devices or services is harmful or perceived as harmful, the option to use ■ a wireless device may be restricted or eliminated. Airports, Hospitals, and Oxygen or flammable gas laden atmospheres are limited examples where use of wireless devices may be restricted or eliminated. When in environments where you are uncertain of the sanction to use wireless devices, ask the applicable authority for authorization prior to use or turning on the wireless device. Every country has different restrictions on the use of wireless devices. Since your system is equipped with a wireless device, ■ when traveling between countries with your system, check with the local Radio Approval authorities prior to any move or trip for any restrictions on the use of a wireless device in the destination country. If your system came equipped with an internal embedded wireless device, do not operate the wireless device unless all covers ■ and shields are in place and the system is fully assembled. Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the ■ authorization to use it. Please contact manufacturer for service. Only use drivers approved for the country in which the device will be used. See the manufacturer System Restoration Kit, or ■ contact manufacturer Technical Support for additional information.
Page 25 United States of America USA and Canada Safety Requirements and Notices Do not touch or move antenna while the unit is transmitting or receiving. Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting. Do not operate the radio or attempt to transmit data unless the antenna is connected; if not, the radio may be damaged. Use in specific environments: The use of wireless devices in hazardous locations is limited by the constraints posed by the safety directors of such environments. The use of wireless devices on airplanes is governed by the Federal Aviation Administration (FAA). The use of wireless devices in hospitals is restricted to the limits set forth by each hospital. Explosive Device Proximity Warning Do not operate a portable transmitter (such as a wireless network device) near unshielded blasting caps or in an explosive environment unless the device has been modified to be qualified for such use. Use On Aircraft Caution Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices because their signals could interfere with critical aircraft...
Page 26 This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. ■ Increase the separation between the equipment and ■ receiver. Connect the equipment into an outlet on a circuit ■ different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV ■ technician for help. If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet help- ful: “Something About Interference.” This is available at FCC local regional offices. Our com- pany is not responsible for any radio or television inter- ference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by our company. The correction will be the responsibility of the user. Use only shielded data cables with this system. Intentional emitter per FCC Part 15 Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz Band, may be present (embedded) in your notebook...
Page 27 Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Contact manufacturer for service. FCC Statement for Wireless LAN use: “While installing and operating this transmitter and antenna combination the radio frequency exposure limit of 1mW/cm2 may be exceeded at distances close to the antenna installed. Therefore, the user must maintain a minimum distance of 0cm from the antenna at all times. This device can not be colocated with another transmitter and transmitting antenna.” (This Statement is not applicable to UMPC(Ultra Mobile PC) such as PDA, Portable PC.) FCC Part 68 (If fitted with a modem device.) This equipment compiles with part of the FCC rules. On the back of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company.
Page 28 This equipment cannot be used on public coin phone service provided by the telephone company. Connection to party line service is subject to state tariffs. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including fax machines, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be any number for which charges exceed local or long-distance transmission charges.) In order to program this information into your fax machine, refer to your communications software user manual. Canada Unintentional Emitter per ICES-003 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limitesapplicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioélectrique édicté par Industrie Canada. Intentional Emitter per RSS 210 Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz Band, may be present (embedded) in your notebook system. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices.
Page 29 This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter except the installed Bluetooth transmitter. Operation of this device is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. To prevent radio interference to licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Contact manufacturer for service. Telecommunications per DOC notice (for products fitted with an IC-compliant modem) The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operation, and safety requirements. The Department does not guarantee the equipment will operate to the users’ satisfaction. Before installing this equipment, users should make sure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. In some cases, the inside wiring associated with a single-line individual service may be extended by means of a certified connector assembly. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.
Page 30 European Union European Union CE Marking and Compliance Notices Products intended for sale within the European Union are marked with the Conformité Européene (CE) Marking, which indicates compliance with the applicable Directives and European standards and amendments identified below. This equipment also carries the Class 2 identifier. The following information is only applicable to systems labeled with the CE mark. European Directives This Information Technology Equipment has been tested and found to comply with the following European directives: ■ EMC Directive 89/336/EEC with amending directives 92/31/EEC & 93/68/EEC as per – EN 55022 Class B – EN 61000-3-2 – EN 61000-3-3 – EN 55024 ■ Low Voltage Directive (Safety) 73/23/EEC as per EN 60950(A1/A2/A3/A4/A11) ■ Radio and Telecom Terminal Equipment Directive 199/5/EC as per – CTR21 (if fitted with a modem device) – ETS 300 328 (if fitted with a 2.4 GHz band embedded wireless device) – ETS 301 489-1 (if fitted with a 2.4 GHz band embedded...
Page 31 Translated Statements of Compliance [English] This product follows the provisions of the European Direc- tive 1999/5/EC. [Danish] Dette produkt er i overensstemmelse med det europæiske direktiv 1999/5/EC [Dutch] Dit product is in navolging van de bepalingen van Europ- ees Directief 1999/5/EC. [Finnish] Tämä tuote noudattaa EU-direktiivin 1999/5/EC määräyk- siä. [French] Ce produit est conforme aux exigences de la Directive Européenne 1999/5/EC. [German] Dieses Produkt entspricht den Bestimmungen der Eu- ropäischen Richtlinie 1999/5/EC [Greek] Το προϊόν αυτό πληροί τις προβλέψεις της Ευρωπαϊκής Οδηγίας 1999/5/ΕC. [Icelandic] Þessi vara stenst reglugerð Evrópska Efnahags Ban- dalagsins númer 1999/5/EC [Italian] Questo prodotto è conforme alla Direttiva Europea 1999/5/EC. [Norwegian] Dette produktet er i henhold til bestemmelsene i det euro- peiske direktivet 1999/5/EC. [Portuguese] Este produto cumpre com as normas da Diretiva Européia 1999/5/EC. [Spanish] Este producto cumple con las normas del Directivo Eu- ropeo 1999/5/EC. [Swedish] Denna produkt har tillverkats i enlighet med EG-direktiv 1999/5/EC.
Page 32 General European standards dictate maximum radiated trans- mit power of 100 mW effective isotropic radiated power (EIRP) and the frequency range 2400 – 2483.5 MHz. Belgium The product may be used outdoors, but for outdoor trans- missions over a distance of 300m or more, a license from the BIPT is required. This restriction should be indicated in the manual as fol- lows: Dans le cas d’une utilisation privée, à l’extérieur d’un bâtiment, au-dessus d’un espace public, aucun enregis- trement n’est nécessaire pour une distance de moins de 300m. Pour une distance supérieure à 300m un enregis- trement auprès de l’IBPT est requise. Pour une utilisation publique à l’extérieur de bâtiments, une licence de l’IBPT est requise. Pour les enregistrements et licences, veuillez contacter l’IBPT. France For Metropolitan departments: 2.400 - 2.4835 GHz for indoor use. 2.400 -2.454 GHz (channels 1 to 7) for outdoor use. For Guadeloupe, Martinique, St Pierre et Miquelon, Mayo- tte: 2.400 - 2.4835 GHz for indoor and outdoor use. For Reunion, Guyane: 2.400 - 2.4835 GHz for indoor use. 2.420 - 2.4835 GHz for outdoor use (channels 5 to 13) European Telecommunication Information (for products fitted with EU- approved modems) Marking by the symbol indicates compliance of this equipment to the Radio and Telecom Terminal Equipment Directive 1999/5/EC. Such marking is indicative that this equipment meets or exceeds the following technical standards:...
Page 33: Weee Symbol Information
WEEE SYMBOL INFORMATION Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. CALIFORNIA USA ONLY This Perchlorate warning applies only to primary CR (Maganese Dioxide) Lithium coin cells in the product sold or distributed ONLY in California USA. “Perchlorate Material- special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate.”...
Page 34: Overview
Overview Before You Start! ■ The items marked with this symbol are optional items which may be changed or may not be provided depending on the computer model. ■ The actual color and appearance of the computer may differ from the pictures used in this guide. Front View LCD Latch This latch is used to open and close the LCD panel. To open the LCD panel, slide the latch to the right and then lift the LCD panel up. Status Indicators Shows the operating status of the computer. The corresponding operating LED is lit when the corresponding function operates. p. 34 Power Button Turns the computer on and off. p. 39 Touchpad/Touchpad Buttons The touchpad and touchpad buttons provide functions similar to the mouse ball and buttons. p. 44 The screen images are displayed...
Page 35: Status Indicators
Status Indicators Wireless LAN This turns on when the wireless LAN is operating. Hard Disk Drive This is lit when the hard disk drive is operating. Scroll Lock This turns on when the Scroll Lock key is pressed and screen scroll is locked. p. 42 Caps Lock This turns on when the Caps Lock key is pressed allowing capital letters to be typed without holding the Shift button down. Num Lock This turns on when the Num Lock key is pressed and numeric keypad is activated. p. 42 Power This shows the computer operating status. Green: When the battery is fully charged or the battery is not installed. Amber: When the battery is being charged. Off: When the computer is running on battery power without being connected to AC adapter.
Page 36: Right View
Right View TV Antenna Jack Connect TV antenna here. CD Drive Plays CD or DVD titles. Since an ODD drive is optional, the installed drive depends on the computer model. p. 47 Security Lock Port You can connect a Kensington lock to the Security Lock Port to prevent the computer from being stolen. AV Input Port Connect the output cable of external AV equipment (VCR, camcorder, etc.) here. Modem Port A port to which a telephone cable is connected to in order to dial up to the Internet.
Page 37: Left View
Left View TV Output Port A port used to connect a TV to display the computer screen on the TV. (S-Video Support) Fan Vents The internal heat of the computer is emitted through these holes. If the vents are blocked the computer may overheat. Avoid blocking the vents as this may be dangerous. USB Port You can connect USB devices to the USB port such as a keyboard/mouse, digital camera, etc. Multi Card Slot A card slot that supports Memory Stick, Memory Stick Pro, SD Card, MMC, MMC Plus and xD cards. Headphone Jack A jack used to connect the headphones. Microphone Jack A jack used to connect the microphone.
Page 38: Back View
Back View USB Port You can connect USB devices to the USB port such as a keyboard/mouse, digital camera, etc. Wired LAN Port Connect the Ethernet cable to this port. p. 71 DC Jack A jack to connect the AC adapter that supplies power to the computer. Monitor Port A port used to connect a monitor, TV or projector supporting a 15pin D-SUB interface. p. 52...
Page 39: Bottom View
Bottom View Speaker A device used to generate sound. You will be charged to replace the hard disk at service centers. Memory Compartment Cover The main memory is installed inside the cover. p. 126...
Page 40: Turning The Computer On And Off
Turning the Computer On and Off Turning the computer on Connect the AC adapter. (Refer to the Installation Guide.) Slide the LCD Latch to the right and then lift up the LCD panel. Press the Power button to turn the computer on. If the LCD brightness is too dim, press the Fn+ ( keys and adjust the screen brightness. p. 43 Turning the computer off Click the start button ( Click Turn Off Computer. Click Turn Off. If the computer has not turned off properly due to a ■ system error, press <Ctrl>+<Alt>+<Delete>. When [Windows Task Manager] dialog box appears, click Shut Down > Turn Off to turn off the computer. Your unsaved work may be lost/damaged.
Page 41: Chapter 2. Using The Computer
Chapter 2. Using the computer Keyboard Touchpad CD Drive Inserting and Ejecting a CD Burning a CD Multi Card Slot Connecting a Monitor / TV Connecting a Monitor Connecting a TV Viewing Through a Monitor Using Dual View to View Extended Screen Adjusting the Volume Using Recorders...
Page 42 Keyboard The keyboard is supplied according to the corresponding country. Refer to the keyboard figure for the corresponding country. United Kingdom United States...
Page 43: Shortcut Keys
Shortcut Keys You can use the following functions by pressing the keys below with the Fn key. Name REST Switches to Sleep mode. To wake the computer up, press the Power button. (Sleep Mode) Enters the Euro monetary unit symbol. Euro This key may not be provided depending on the keyboard type. Switches the screen output to the LCD or external monitor when an external monitor (or TV) is CRT/LCD connected to the computer. Backlit Turns the LCD backlight on or off. Mute Mutes or cancels mute. Samsung Magic System diagnosis, recovery and Internet consultation program, Samsung Magic Doctor, will be Doctor launched. You can select operation mode when you need maximum system performance or low-noise/low power consumption with one-click. ■ Silent: Low-noise and low power consumption mode Easy SpeedUp ■ Normal: Normal Mode Manager ■ Speed: Maximum performance mode. The system operates in its maximum performance, Wireless LAN Turns the wireless LAN function on or off in models with wireless LAN capability. Turns the Touchpad function on or off. Touchpad When using an external mouse only, you can turn the Touchpad off.
Page 44: Other Function Keys
Screen Brightness Control To adjust the LCD brightness press the Fn + ( combination or the Fn + ( ) key combination. The changed screen brightness is displayed at the center of the screen for a moment. Volume Control To control the volume, press the Fn + ( combination or the Fn + ( ) key combination. You can mute the sound or cancel the mute function by clicking the Fn + ( ) key combination. Numeric Key The numbers are printed in blue on the numeric keys. If Num Lock is turned on by pressing the Fn + ( combination, you can use the numeric keys to enter digits. Other Function Keys ) key ■ Application Key ( Performs the right-click mouse function (touchpad). ■ Internet Explorer Quick Launch Key ( Launches Internet Explorer. ) key ) key...
Page 45 Touchpad The touchpad provides the same function as a mouse and the left and right buttons of the touchpad plays the role of the left and right buttons of a mouse. Before You Start! Use the Touchpad with your fingers. Using a sharp object may damage the Touchpad. ■ If you touch the Touchpad or press the Touchpad buttons while booting up, the Windows boot time may be extended. ■ Touchpad Use to move the cursor. Touchpad Left Button You can select or run a program using this button, Scroll Area Plays the role of the mouse wheel. You can scroll up and down using the Scroll Area. Touchpad Right Button Plays the role of the right mouse button.
Page 46 Moving the cursor on the screen Place your finger on the touchpad slightly and move your finger. The mouse cursor will move accordingly. Move your finger in the direction you wish to move the cursor. Click Function Place your finger on the touchpad and tap your finger once over an item you want. Alternatively, press the left touchpad button once. Click Double-Click Function Put your finger on the touchpad and quickly tap twice with your finger on an item you want. Alternatively, press the left touchpad button twice quickly. TapTap Right Button Function This corresponds to clicking the right mouse button. Press the right touchpad button once. The corresponding pop-up menu appears. ClickClick...
Page 47 Drag Function Dragging refers to moving an item to another place after selecting it. Press and hold down the left touchpad button over an item you want to drag and move the item to the new location. Holding down the left touchpad button Touchpad Scroll Function The touchpad scroll area provides the mouse wheel function (scroll function). Place your finger on the touchpad’s right edge for vertical scrolling or the bottom edge for horizontal scrolling and then move your finger along the edge to scroll the screen vertically or horizontally. Touchpad On/Off Function If you want to use the mouse only without using the touchpad, you can turn the touchpad off. To lock the touchpad function, press the Fn + ( Move ) keys.
Page 48: Inserting And Ejecting A Cd
CD Drive An optical disk drive is optional and may differ depending on your computer model. For detailed specifications, refer to the catalog. Before You Start! One of the following optical disk drives is installed on this computer. Drive Type Function DVD-ROM Reads CD/DVD. RW-Combo You can read CDs and DVDs, and burn a CD. You can read CDs and DVDs, and burn CDs and DVDs. DVD Super Multi Supported DVD recording types include DVD±R, DVD±RW, DVD-RAM. Do not insert a cracked or scratched CD. ■ Otherwise, the CD may break and damage the optical disk drive when the CD rotates at a high speed. When you clean a CD or DVD title, wipe with a soft cloth from inside to outside. ■ Do not eject a CD when the CD operating LED is on. ■ Inserting and Ejecting a CD Click the Eject button of the optical disk drive at the side of the computer. Status Indicator Emergency Hole Eject Button...
Page 49: Burning A Cd
When the CD tray pops out, insert a CD or DVD until it clicks. Push the CD tray inward until it clicks. The CD drive status indicator is turned on. A CD drive’s reading and writing speed may differ ■ depending on the condition and type of the media. To eject a CD when the CD drive does not work or ■ the computer is off, place the end of a paper clip ( ) into the Emergency Hole until the CD tray is ejected. Burning a CD If your computer has a writable CD drive, you can write data onto a CD or DVD or burn an audio CD. CyberLink DVD Suite is supplied with the System Software Media (or an additional CD) so that you can burn a CD using the program. Install the provided software and use the software functions referring to the software help.
Page 50: Multi Card Slot
Multi Card Slot Using the multi card slot, you can read and write data to a Memory Stick, Memory Stick Pro, SD card, MMC, MMC Plus, and xD card. You can use a card as a removable disk and conveniently exchange data with digital devices such as a digital camera, digital camcorder, MP3, etc. Before You Start! A multi card slot is optional and is provided for some models only. ■ You have to additionally purchase a multi card with the necessary capacity depending on your requirements. ■ You can use a multi card just like any data storage device. A copyright protection function is not supported. ■ Since you can lose a card when moving the computer, keep the card separately. ■ Supported Cards Memory Stick Memory Stick Pro MMC plus SD Card xD Card...
Page 51 To Insert and Use a Memory Card Insert a card into the slot according to the directions printed on the slot. Example) SD Card Click Start > My Computer. The inserted memory card is displayed. You can save, move and delete data by double- clicking the corresponding drive. Since you can only use the card after formatting it, if it is not formatted, format the card referring to the descriptions of “To format a memory card”. Using a Memory Stick Duo, Mini SD and RS-MMC Since the above cards are too small, you cannot insert the cards into the slot directly. Insert the card into the dedicated adapter and then insert the adapter into the multi card slot.
Page 52 To remove a memory card Push the tip of the card lightly. If the card pops up with a clicking sound, remove the card. To format a memory card You have to format a card first to use it. Formatting a card deletes all data saved on the card. If the card includes data, backup the data before formatting it. Click Start > My computer. Right-click over a card drive with the touchpad and select Format. Click Start to the formatting. To use a card to exchange data with a digital device such as a digital camera, formatting the data using the digital device is recommended. When you try to use a card, which is formatted in the computer, in another digital device, you may have to format the card again in the device.
Page 53: Connecting A Monitor / Tv
Connecting a Monitor / TV Using an external display device is useful when you are giving a presentation or watching a video or movie through your TV. The procedures to connect a monitor or TV to the computer and to watch through a connected monitor or TV are described below. Before You Start! You have to buy a connection cable additionally. Connecting a Monitor Connect the monitor to the Monitor port.
Page 54: Connecting A Tv
Connecting a TV Since the port to connect to a TV differs depending on the port type used to connect the TV, connect as follows. Connecting to the Monitor port Connect the monitor and computer using the PC Input (RGB) port on the TV with the monitor cable (15pin). Connecting to the TV Output port Connect the computer and the monitor using the S-Video port of the TV using the S-Video cable.
Page 55: Viewing Through A Monitor
Viewing Through a Monitor You can switch the display device using the shortcut key. Switching the Display Device using the Shortcut Key Press the Fn + ( ) key combination once. Then the Easy Display Manager screen appears in which you can select a display device. Whenever you press the ( ) key while holding down the Fn key, the selected option is changed. Example) Selecting LCD+CRT Dual View LCD: Notebook Screen CRT: External Monitor Screen LCD+CRT Clone : Notebook+ External Monitor Screen LCD+CRT DualView: Notebook+ External Monitor Screen in Dual View What is Dual View? Dual View is a function that enables you to view a computer screen over two display devices. It is convenient when you need a wide screen.
Page 56: Using Dual View To View Extended Screen
Using Dual View to View Extended Screen Dual View is a function that enables you to view a computer screen over two display devices. This is convenient when needing a wide screen for work. In Dual View mode, you can select the screen resolution and colour quality for each display device, as if there were two separate graphics cards. Connect the external display device (e.g. a monitor or a projector) to the corresponding port of the system. To connect a TV, connect the TV to the TV output port of the system. Press touchpad right button on the desktop, click Properties, and then click the Settings tab. Click the monitor 2 icon, select the Extend my Windows desktop onto this monitor check box, and then click Apply.
Page 57 When the configuration is complete, click Identify on the left side of Troubleshoot. The primary display device(the LCD) is indicated as 1, and the secondary display device is indicated as 2. Now you can view the screen through two monitors. 1 : Primary When you use Dual View, configuring the LCD as the ■ 'Primary' monitor is recommended. If the screen of the secondary display device is ■ displayed at 640x480 pixels, with 256 colours, change the settings to the desired screen resolution and colour quality in the [Display Properties] dialog box. Deactivating Dual View Mode Click the monitor 2 icon, clear the Extend my Windows desktop onto this monitor check box, and then click Apply. To move a window between display devices in Dual View mode Click the title bar of the window in the primary display device (1, the LCD), and drag it to the secondary display device (2). The window is moved to the secondary...
Page 58: Adjusting The Volume
Adjusting the Volume using the Volume Adjustment Program Click the Volume icon ( ) on the taskbar and slide the volume control bar to adjust the volume. Mute For advanced volume control options, double-click the Volume icon( ), and adjust the volume level in the volume control program. When you turn the system on, a booting noise may occur. ) key Using EDS Enables listening to surround sound using stereo speakers. To listen to more stereophonic sound, click Start > All Programs > Samsung > Samsung EDS > Samsung EDS or double-click the EDS icon ( and select a surround mode from the pop-up menu. To disable EDS, select Enhanced Digital Sound OFF from the pop-up menu. To disable EDS, select Enhanced Digital Sound OFF from the pop-up menu. ) on the Taskbar...
Page 59: Using Recorders
Using Recorders This section describes how to perform recording on a computer by using Windows Recorder. Connect a microphone to the microphone jack. Click Start > Control Panel > Sounds, Speech, and Audio Devices > Sounds and Audio Devices. Click Advanced from Volume and then, click Options > Properties. Select HD Audio capture from the mixer device to select Recording from Adjust Volume for. Select Mic in Volume from Show the following volume controls and click OK. The Recording Control window appears and the Selection checkbox of Microphone is selected.
Page 60: Windows Xp
Chapter 3. Using Microsoft Windows XP About Microsoft Windows XP Tour Windows XP Help and Support Windows XP Screen Layout Desktop Start Menu Window Control Panel Running Control Panel Running the Control Panel User Account Changing Resolution and Color The screen shots used in this chapter may differ from actual screens depending on the Windows XP version and model.
Page 61: About Microsoft Windows Xp
About Microsoft Windows XP Microsoft Windows XP (hereinafter referred to as Windows) is the basic operating system for computers. You should know how to use Windows in order to use your computer properly. Use Tour Windows XP as well as Help and Support to learn about how to use Windows. Tour Windows XP Tour Windows XP introduces the basic features and characteristics of Windows. Click Start > Tour Windows XP. Or, click Start > All Programs > Accessories > Tour Windows XP. Click the title at the right to view the description of the Windows features. The screen layout may differ depending on the computer model and the operating system. Click the title.
Page 62: Help And Support
Help and Support Help and Support allows you to view the features and usage of Windows. Also, it allows you to search the information you want by entering a search keyword. Click Start > Help and Support. Search: Enter a search keyword to view the Help. Fixing a problem: If a problem occurs, you can get help. How to Change Desktop (Background Picture) New Features of Windows XP > Windows XP Items: Walkthroughs on How to Use PCs > Walkthroughs: After clicking Customize PC, you can view the way to change the back ground picture on Change Desktop.
Page 63: Windows Xp Screen Layout
Windows XP Screen Layout Desktop If you turn on the computer, the Desktop will appear. The Desktop is the work space (screen) of a computer and is configured as follows: The screen layout may differ depending on the computer model and the operating system. Shortcut Icons You can launch programs by clicking the shortcut icons on the Desktop.. Start Menu The menu from which you can launch programs. Start button Press the start button. The Start menu appears. Taskbar Currently running programs are displayed here. Recycle Bin You can drop useless files and folders here. Language Bar Switches text input language. System Tray with Clock Shows some running program icons.
Page 64: Start Menu
Start Menu The menu from which you can launch programs. Click Start. The Start menu appears. Alternatively, press the Windows key on the keyboard. Items that are pined to the Start menu. User account name All Programs Frequently used programs Displays the contents of the hard disk, the CD-ROM drive, the network drive(s), and floppy disks. My Computer It can also be used to search and open files and folders. Control Panel Enables users to configure settings on the computer. Help and Provides on-line help, information on Windows and troubleshooting. Support Search Enables users to search for information in files or the Internet. Run programs or documents. My Documents folder My Computer Control Panel Help and Support Search...
Page 65: Window
Window A window is a basic foundation for operating your computer. For instance, a window of your computer is configured as follows: Click Start > My Computer. Displayed menus and names may be varied. Double-click the Local Disk, which is a hard disk drive, to view the folders and files saved in your computer. If any folder or file is not shown, click Show Folder Contents. Menu Bar Title Bar Toolbar Fast Operation Window What is a Drive? A drive is a storage device that can read or write data such as folders and files. What is a Folder? A folder is just like a cabinet that keeps files or folders. You can keep files or folders of similar kinds in a folder. What is a File? A file is the minimum unit of materials created by using a program and is also called data. How to View the Entire Drive Structure Click the folder icon from the Toolbar to view the drive structure.
Page 66: Control Panel
Control Panel The Control Panel has a group of tools that enable to configure the Windows-related settings. Running Control Panel Click Start > Control Panel. Appearance Change the appearance of desktop items, apply a theme or screen saver to your computer, and Themes or customize the Start menu and Taskbar. Network Connect to the Internet, create a home or small office network, configure network settings to and Internet work from home, or change modem, phone, and Internet settings. Connections Add or Remove Install or remove programs and Windows components. Programs Sounds, Change the entire sound scheme or individual sounds made by your computer, or configures Speech, and the settings for your speakers and recording devices. Audio Devices Performance Schedule regular maintenance checks, increase space on your hard disk, or configure energy-saving settings. Maintenance...
Page 67: Running The Control Panel
Running the Control Panel Click Start > Control Panel. Printers and Other Change the settings for your printer, keyboard, mouse, camera, and other hardware. Hardware User Change user account settings, passwords, and pictures. Accounts Date, Time, Language, Change the date, time, and time zone for your computer, the language to use, and the way and Regional numbers, currencies, dates, and times are displayed. Options Accessibility Adjust your computer settings for vision, hearing, and mobility. Options Security View your current security status and access important settings to help protect your PC. Center...
Page 68: User Account
User Account Windows XP allows to set multiple users with accounts. This section describes how to add a user account and to switch a it. How to Add a User Account Click Start > Control Panel. Click User Accounts and Create a new Account in sequence. Enter your name and click Next. Select an account type and click the Create Account button. Then, check the created account from the User Account window. Click the target account and change the user account information. You can change the account name, password, account type, and picture.
Page 69 To Delete User Account Click Start > Control Panel > User Account. Select the user account to be deleted and click Delete Account. The administrator account cannot be deleted. It can only be renamed or disabled. How to Switch a User Click Start > Logoff. Click Switch User. Click the user name to be switched from the Welcome screen. Then you can log on with a new user name.
Page 70: Changing Resolution And Color
Changing Resolution and Color A resolution is the number of pixels displayed on the screen. If you set the resolution to a higher value, items on the screen will be displayed smaller and the screen looks wider than the pervious. As color quality gets higher, more colors can be represented. Click Start > Control Panel > Appearance and Themes > Change the screen resolution. Move the slider bar to set the resolution. It is recommended to set the resolution and color quality depending on the LCD type of your computer as the following: LCD Type Resolution SXGA 1280 x 1024 Click Settings and change the resolution and color quality. Then, click OK. Color Quality Strongest (32-bit) You can select a graphic chip set. Click the pull-down menu button to select the number of colors you want.
Page 71: Chapter 4. Using The Network
Chapter 4. Using the Network Wired Network Wireless Network Connecting to Wireless LAN Connecting to computer-to-computer networks (peer-to-peer or ad hoc) Wireless Network Setup Using the Wireless LAN Setup Program Using Samsung Network Manager Perform Network Settings Using the network after moving location Sharing Internet Access Checking Network Status Connecting with a Modem...
Page 72: Wired Network
Wired Network A wired network is a network environment used for a company network or broadband internet connection at home. Before You Start! You can also configure the network settings using the Samsung Network Manager. p. 80 Connect a LAN cable to the computer’s LAN port. Click Start > Control Panel > Network and Internet Connections > Network Connection. Click Manage Network Connections from the left pane. Select Local Area Connection and click the right button of the touch pad and select Properties.
Page 73 Click General tab and select a LAN driver from Connect using:. Select Internet Protocol(TCP/IP) and click Properties. The displayed LAN driver may vary depending on the LAN device type. Click Install to add a network component as shown in the figure below: You can add a client, a service, or a protocol. Configure IP settings. Select Obtain an IP address automatically when using DHCP. If you use a static IP, select Use the following IP address and enter the values. If the IP of your computer is not automatically assigned, contact the network administrator. If all settings are made, click OK. Now the network configuration is finished.
Page 74 Using both DHCP and a fixed IP simultaneously Using the Alternate Configuration providing by Windows XP, you can set both automatic and fixed IP addresses and then you can select to use either of them to connect to the Internet. Click Start > Control Panel > Network and Internet Connections > Network Connection > Local Area by using the right button of the touch pad and click Properties. Select Internet Protocol (TCP/IP) and click Properties. Select the Alternate Configuration tab, select User configured and fill in the fields. When the setting completes, click OK.
Page 75: Wireless Network
Wireless Network A wireless network allows computers to share resources or an internet connection without using LAN cables between them. Before Use! You can set a network by using Samsung Network Manager as well. p. 80 This description is applied only to the models equipped with wireless LAN cards or devices. You can set a wireless network by using ■ Samsung Network Manager as well. p. 80 A wireless LAN device is optional when purchasing. Click a symbol, +, from Start > Control Panel > Performance and Maintenance > System > Hardware Tab > Device Manager > Network Adapter to check the device type. Some of the pictures shown in this description may vary depending on the wireless LAN device. Press the Fn + ( ) key and enable the wireless LAN features to use wireless LAN. Once the wireless LAN is enabled, ■ the wirelss LED ( ) turns on.
Page 76: Connecting To Wireless Lan
Connecting to Wireless LAN If an AP exists near your location, you can easily connect to wireless LAN in the method provided by Windows XP. If you use the program provided by a wireless LAN card provider, connect to wireless LAN after seeing page 77 of this document. The following description is based on Windows XP Service Pack 2; thus, the pictures may vary. Click the Wireless Network Connection icon ( ) from the Taskbar using the right button of the touch pad. Then, click View Available Wireless Networks. Select an AP to be connected and click Connect. If a network key is set in the AP, the network key input window will appear. Enter the network key in the input window and click OK. For a network key, contact the network administrator. Once Connected to AP is displayed, you can use a wireless network. To check the network connections Place the mouse on the Wireless Network Connection icon ( ) from the Taskbar. Then, the status will appear.
Page 77: Connecting To Computer-To-Computer Networks (Peer-To-Peer Or Ad Hoc)
Connecting to computer-to-computer networks (peer-to-peer or ad hoc) In computer-to-computer wireless networks, you can wirelessly connect 2 or more computers that have wireless LAN modules. Using this method, a computer that is not connected to the Internet can share the Internet by accessing another computer connected to the Internet. (Refer to “Sharing Internet Access” on page 82.) You can connect by completing the following steps: Step 1. Set up a computer-to-computer network on a ■ computer. Step 2. Connect to the configured computer from other ■ computers. Step 1. Setting up a computer-to- computer network Right-click on the Wireless Network Connection ) icon on the taskbar, and select View Available Wireless Networks.
Page 78 Enter the network name (e.g. samsung), and unselect ‘The key is provided for meautomatically’. Enter the encryption key in the Network key field, and click OK. To prevent a network connection from an unauthorized user, it would be better to configure a network key (encryption key). A network key consists of 5 ~ 13 alphanumeric characters (e.g. magic), or of 10 ~ 26 hexadecimal numbers (ahexadecimal number is represented by numbers ‘0’ to ‘9’ or letters ‘a’ to ‘f’). Check that the configured network name (e.g. samsung) is in the ’Preferred networks’item, and click OK.
Page 79 Step 2. Connecting to the configured computer Right-click on the Wireless Network Connection ) icon on the taskbar, and select View Available Wireless Networks. Select the wireless network name (e.g. samsung) specified in ”Connecting to computer-to-computer networks (peer-to-peer or ad hoc)” on page 74, and click Connect. Enter a cryptographic key in the network key box and click Connect. If the network key is not configured in ”Connecting to computer-to-computer networks (peer-to-peer or ad hoc)” on page 74, just click Connect, without any keystrokes. When connected to the wireless network, the system displays Connected in the selected network of the Network Connection window. Checking the connection status Move the mouse pointer over the Wireless Network Connection ) icon on the taskbar, and the connection status is displayed.
Page 80: Wireless Network Setup Using The Wireless Lan Setup Program
Wireless Network Setup Using the Wireless LAN Setup Program The procedures to connect to an access point using a wireless LAN configuration program are described. Since the wireless LAN configuration program is included in the System Software Media, the user has to install the program. Atheros Wireless Network Adapter Device Insert the System Software Media into the CD drive and install the wireless LAN configuration program (ACU: Atheros Client Utility). Select System Software Media > User Installation >...
Page 81: Using Samsung Network Manager
■ Easy check-up for the network connection status. p. 88 Perform Network Settings You can set up a wired network or wireless network. When different networks are used in different places, you must set up the network environment for each place. The progress of configuration is displayed while the network is being set up. If you use a wired LAN, connect the LAN cable to the wired LAN port. Press the <Fn> + ( enable the wireless LAN features to use wireless LAN. Once the wireless LAN is enabled, the wireless LAN LED turns on. p. 80~81 Click Start > All Programs > Samsung > Samsung Network Manager > Samsung Network Manager. Click Add. ) key and...
Page 82 Select an icon to choose the network location and enter the location name (for example, “Home”) and click Next. Select Internet Direct Connection and click Next. Select a device and configure IP settings. Then, click Next. Choose Device Select between wired LAN and wireless LAN. IP Settings Contact the network administrator and enter the IP information if the IP is not an automatic IP. Get IP Automatically Select this option and perform automatic IP settings if you use DHCP.
Page 83 When the Printer Setting window appears, click Finish. To add a printer, click Add Printer. The Add Printer Wizard appears. Set up theprinter according to the instructions displayed on the screen. When the printer has been added, click the Show printer button, select the newlyadded printer and then click the Finish button. To not add a printer, select No Default Printer and then click the Finish button. When the network setting is complete, the ’Do you want to move to newly added location now?’ message appears. If you select ’Yes’, the network settings for the added location are applied. When the network settings for the added location are applied, the added place and the corresponding network connection information is displayed in The detailed Information for window. When the network setting is complete, an icon for the added location is created within the Saved Locations window. Now you can use the...
Page 84: Using The Network After Moving Location
Connect button. For information on available wireless LAN APs, ask your network administrator. Available AP Connect 3. The network key (security key) input window appears. - If a network key has been set for the wireless LAN AP, enter the network key and click the Connect button. For the network key information, ask your network administrator. - If no network key has been set for the wireless LAN AP, click the Connect button without entering the network key. 4. When the computer is connected to the wireless LAN AP, the Connected message will appear on the Wireless Network icon in the Taskbar. Using the network after moving location By setting the network settings (IP address, printer setting, etc.) for each location, you can immediately access the network without performing the network setting procedures regardless of your location. Run Samsung Network Manager when connected to the Internet. Select an icon that represents the corresponding location from the Saved Locations window and then click Move. When the network settings of the selected location are applied, the new location and the network connection information are displayed in The detailed Information for window.
Page 85: Sharing Internet Access
Sharing Internet Access Set one computer as the sharing server and another computer as the client for two computers to share an Internet using one Internet line. Once the configuration is complete, you can use the Internet immediately. If you perform Internet sharing setup by using Samsung Network Manager, the program must be installed into both computers. There are three methods for setting each computer as a sharing server and a client as shown in the table. This document describes how to do so by giving an example to the typical connection method 1 (Wire+Wireless). Sharing Server (Hereinafter referred to as server) Computer that is equipped with two LANS and is directly connected to an Internet. Sharing Client (Hereinafter referred to as client) Computer that is not directly connected to the Internet and is able to use the Internet through the sharing server. How to Connect the Client to the Server Network Device of the Server Connection Connection Type Device to the Internet...
Page 86 How to Set up Sharing Server Check if the LAN cable is properly connected before setting up the sharing server. Run Samsung Network Manager on the computer that will be used as the sharing server. Click Add. Select the icon that shows the network location and enter the location name (for example, Home-Sharing Server) and click Next. Select the sharing server and click Next. Set up the network device to be connected to the external Internet as shown in the figure below and click Next. Determining whether to use a firewall IP address setting Select a network device (for example, wired LAN)
Page 87: How To Set Up The Sharing Client
If the “Do you want to move to newly added location now?” window appears, click No. The added location icon is created and sharing server setup is complete. Set up the sharing client next. How to Set up the Sharing Client This description is discussed based on the wireless connection to the sharing server. The sharing server has to be turned on and the wireless LANs in both computers have to be active. Run Samsung Network Manager on a computer that will function as the sharing client. Click Add. Select the icon that shows the network location and enter the location name. Click Next. Select Sharing Client (Wireless) and click Next. Enter the values in the Wireless Connection Name and Network Key fields in the Select Device window and click Next. Check the settings and click Next.
Page 88 If you click Yes, the computer connects to the sharing server and you can immediately use the Internet. To connect to the Internet from the Sharing Client Check if the sharing server turns on because this is mandatory. If you connect to the sharing server through a wireless LAN, the wireless LAN of the server must be turned on. Run Samsung Network Manager on the sharing client computer. Click the icon for the location that has been set as the sharing client in the Shared Location window and click Go. Once a message appears to inform you that moving is complete, you can use the Internet. If the Internet is disconnected during use, click Wireless menus > Reconnect Sharing in Samsung Network Manager. Then, the network will be connected again.
Page 89: Checking Network Status
Checking Network Status If the network connection is not available, you can easily find the causes by checking the network status. Run Samsung Network Manager. Click Check Auto Diagnosis on the Manage menu. The Network Connection Picture window appears. If you click Start, checking the network will start. When the diagnosis is complete, out of order devices are marked by the exclamation mark icon. For detailed device status, read the description in the lower part of the window. Reconnect and set up the device according to the diagnosis result.
Page 90: Connecting With A Modem
Connecting with a Modem The procedures to connect to the Internet via a phone connection are described below. Before You Start! To connect to the Internet, you have to subscribe to an Internet connection service of an Internet service provider (ISP). ■ A modem port is optional and provided for some models only. ■ Connect the phone Cable to the Modem port. Take care to not connect a digital phone line to the modem port. Connect to the Internet according to the instructions of your Internet service provider (ISP). If the Internet connection is terminated abnormally, the connection is not released and the corresponding cost can be accrued.
Page 91: Chapter 5. Using Applications
Chapter 5. Using Applications Introducing Programs CyberLink PowerDVD Samsung Update Plus Using AVStation premium Getting Started and Screen Layout TV Station MUSIC Station PHOTO Station MOVIE Station...
Page 92: Introducing Programs
Introducing Programs Using the software supplied with the Samsung computer, you can easily use functions and troubleshoot problems. Try to use the software after learning about the basic use of the software. For detailed information, refer to the help section of the corresponding software. Before You Start! Every software program may not be provided depending on your computer model. In addition, the screen capture images may differ from actual ones depending on the computer model and software version.
Page 93 Multi Media Functions  CyberLink PowerDVD ( To use this program, you have to install the program manually using the additionally supplied System Software Media. p. 94  AVStation premium ( AVStation preminum is an integrated multimedia program that enables users to enjoy better quality music, photographs, videos, movies, etc. all with a single program. p. 97 Management Functions  Samsung Update Plus ( Samsung Update Plus is a software function that examines and updates the Samsung software and drivers installed on your Samsung computer to the most recent versions. p. 95  Samsung Network Manager ( Easy Network Manager is a program that enables you to easily configure the network settings. You can configure the network settings for each location and you can also diagnose the network status p. 80...
Page 94 Settings window. Example) T he icon that appears when pressing the Fn + ( ) keys to change the screen brightness.  Easy SpeedUP Manager This program enables you to select operation mode when you need maximum system performance or low-noise/low power consumption with one-click. p. 42 Troubleshooting Functions  SAMSUNG Magic Doctor ( SAMSUNG Magic Doctor is troubleshooting software provided by Samsung Computer for system diagnosis, and restoring the system. The system diagnosis function enables users to diagnose system problems without assistance from others.
Page 95: Cyberlink Powerdvd
CyberLink PowerDVD You can enjoy audio and video playback of your DVD movies using the Cyberlink PowerDVD program. Before You Start! Cyberlink PowerDVD is optional but not offered for some models. Insert a DVD title into the DVD drive. Select Play DVD Video and click OK. DVD movie starts to play in a moment. If the DVD movie does not start immediately, Click Start > All Programs > CyberLink DVD suite > Power DVD > CyberLink PowerDVD. Click Play from the CyberLink skin menu. The DVD movie starts to play. Play Detailed Instruction: ■ For detailed instruction, click Start > All Programs > Cyberlink DVD Suite > Power DVD > PowerDVD Help.
Page 96: Samsung Update Plus
Samsung computer to the latest version. Before You Start! To search for updates and update your computer using Samsung Update Plus, your computer must be connected to the Internet. ■ The update search result may differ depending on your computer model. ■ Samsung Update Plus does not provide updates for applications installed after purchasing the computer. To update the software and drivers Select Start > All Programs > Samsung > Samsung Update Plus > Samsung Update Plus. If this is the first time you are running the program, a window will appear asking you if you agree to the agreement in the window. Click Agree to use this software. Click Search and Install Updates and click Search for New Updates.
Page 97 If there are available software or driver updates for your computer, the available updates will be listed. Select the required updates from the list and click Install Update to start the update. (The update list on the screen may differ depending on the computer model.) Updates that must be installed separately. If you select Install as an update item that must be installed separately, a message appears informing you of this. Follow the instruction message to correctly install Automatic update items display By default, your computer is configured to automatically search for updates. If there is a new update available, this is notified in the notification area. Click the balloon help icon in the notification area. Here you will be able to find the latest available updates.
Page 98: Using Avstation Premium
Before You Start! AVStation premium is optional and may not be provided depending on the model. ■ The screens used in this manual may differ from actual screens according to the program version. ■ TV Station is only available for systems supporting the TV function. ■ For detailed usage, see the program help. ■ Getting Started and Screen Layout To launch the program, select Start > All Programs > Samsung > AVStation premium > AVStation premium. Alternatively double-click the AVStation premium icon ( Menu Bar Library You can watch and record TV programs. MUSIC You can play a music file or an audio CD. PHOTO You can view or edit a photograph (image), and also view the photographs through a SlideShow. MOVIE You can play a video (movie) file or a DVD/VCD title.
Page 99: Tv Station
Using TV Station, you can watch and record TV and CATV programs. In addition, you can play a recorded TV program or watch video from an external video device (e.g. camcorder) by connecting it to your computer. TV Station only appears for models with the TV function. Launch AVStation premium and click on TV on the Station bar. TV Menu Bar TV Library Time Shuttle Buttons Channel Buttons Record Button What is Enhanced Digital Image (EDI)? EDI is a visual quality improvement technology developed by Samsung Electronics. By enabling EDI while watching a TV program or playing a video on AVStation premium, you can experience clearer and sharper picture quality. However, you cannot use the EDI function for some TV tuner and graphics cards. For more information about Enhanced Digital Sound (EDS), see page p.104. What is Time Shuttle? This refers to the function that enables you to pause or rewind a TV program while watching it. You can rewind a TV program up to 30 minutes. Try to control a TV program by using the Time Shuttle button. Recording Reservation Button Station Bar TV Viewer Pane Capture Button EDI Button...
Page 100 Connecting the TV Antenna, Configuring the Input Signal and Scanning Channels The procedures to play an audio CD are described below. Connect the TV antenna cable to the TV antenna jack of the computer. TV Antenna Jack TV Antenna The picture of the system might differ from that of your system. Launch AVStation premium and click on TV. Select your country and only select the Composite and S-Video standards when the default settings are incorrect. Select Tools > Options > TV > Country Settings from the TV Menu Bar to configure the values. After completing the settings, click the OK button. Antenna Dongle The Country Settings menu may not appear depending on your computer model.
Page 101 Select a TV Input Signal. Select Channel > Input Signal from the TV Menu Bar and select either TV (Public Broadcasts) or CATV (Cable TV). Connecting to a Set-Top-Box To connect using a coaxial (TV antenna) cable, ■ select CATV (Cable TV). To connect using a Composite (Audio/Video) cable, ■ select COMPOSITE. To connect using an S-Video cable, select S-VIDEO.
Page 102 Channels from the menu. ■ Watching in Full Screen mode Double-click on the TV screen to watch TV in full screen mode. To return to the previous TV screen size, double-click on the TV screen again. ■ Capturing a TV Screen Click the Capture ( ) button below the TV Viewer to capture the currently displayed image on the screen. Captured images are saved in the C:\Program Files\ Samsung\AVStation Premium xx\Data\Captured Images folder. In addition, you can view captured images in the PHOTO Station > Captured Images folder. Recording a TV Program To record the current TV program, click the Record ( button below the TV Viewing pane. To stop a recording, click the Stop ( When a recording is complete, the recorded file appears in the Recorded TV folder of the TV Library. ) below the TV...
Page 103 Reserving a TV Recording You can reserve a TV recording. Click the Recording Reservation ( the TV Viewing pane. If the Add Recording Reservation window appears, enter a Name, the Channel Number and the Recording Frequency and click the Next button. Set a recording reservation and click the Next button. Confirm the recording reservation settings and click the Finish button. If a recording reservation is set, the recording reservation name appears in the TV Recording Reservation folder of the TV Library. ) button below If a recording reservation is added, set the computer to Standby mode rather than switching the computer off, as the reservation is not performed if the computer is switched off. In addition, if there is insufficient free space on the hard disk drive, the recording reservation will fail. Playing a Recorded TV Program You can play a recorded TV program from the TV and MOVIE Stations.
Page 104 Watching Video from an External Video Device As an example, watching video from a camcorder is described below. To watch video from an external video device, you have to connect the computer and the external video device using the AV input cable and configure the country and input signal settings. Playing a Video Device You can watch video from a video device connected through the Composite or S-Video port, on the TV Station of AVStation premium. Some computers do not support S-Video input. Connect one end of the AV Input Dongle to the Composite or S-Video port of the camcorder and connect the other end of the dongle to the AV In port of the system. AV Input Dongle Launch AVStation premium and click on TV.
Page 105: Music Station
Launch AVStation premium and click MUSIC on the Station Bar. MUSIC Menu Bar MUSIC Library Register a File Play Control Buttons Volume Control What is EDS (Enhanced Digital Sound)? EDS (Enhanced Digital Sound) is a sound quality enhancement technology developed by Samsung Electronics. You can listen to clearer sound if you enable the EDS function when playing music or video on AVStation premium. If the Samsung EDS program is installed, the EDS function of AVStation will not work. Station Bar Playlist Playlist Control Buttons EDS Setting Button Play Options...
Page 106: Playing An Audio Cd
Playing an Audio CD The procedures to play an audio CD are described below. Launch AVStation premium and insert an audio CD into the CD drive. In the Audio CD window, select Play Audio CD using Samsung AVStation and click OK. The tracks on the audio CD are displayed in the Playlist and the first track is automatically played. If an audio CD is already in the CD drive, double-click the album title in the Audio CD folder of the Library and add the tracks to the Playlist. The tracks added to the Playlist are played.
Page 107 Playing a Music File If a music file is registered to the MUSIC Library, you can easily play the music file. For the procedures to register tracks to the Library, see page 107. Move to MUSIC Station and double-click All Music. Double-click a music file. The file is added to the playlist and played. Play a Track not registered to the Library Click File > Open, select a music file to be played and click . The selected track is registered to the Library and played. Creating My Playlist My Playlist is a personal album with which you can collect, manage and play your favorite music files. For the procedures to create My Playlist, see the descriptions of MUSIC Station in Help.
Page 108: Adding Music Files To The Library
Adding Music Files to the Library MUSIC Library is a library holding music files used by MUSIC Station. The procedures to add music files saved on the computer to the Library are described below. You can add files and folders or, search and add files. As an example, the procedures to add a folder are described below. Click the Register a File ( Library and click Add by Folders. Select a folder which included music files and click OK. The music files in the folder are added to the Library. ) button below the The tracks used in AVStation are automatically added to the Library.
Page 109: Photo Station
PHOTO Station Launch AVStation premium and click PHOTO on the Station Bar. PHOTO Menu Bar PHOTO Library Register a File Move to a Higher- Level Folder Station Bar Preview/Zoom-in Image Editor Tab Image Viewer Tab...
Page 110 Viewing an Image The procedures to view images registered to the PHOTO Library are described below. For the procedures to register image files to the Library, see page 112. Move to PHOTO Station and double-click All Images. Click a folder which includes images, and the images in the folder are displayed in the Image Viewer window. Image Viewer Window Image...
Page 111 Double-click an image. The selected image is zoomed in. ■ Viewing an Image not registered to the Library Click File > Open, select an image file to view and click Open. The selected image file is registered to the Library and displayed in the Image Viewer window. ■ Viewing an Image in full screen or through a Slide Show Click the Full Screen ( ) button or SlideShow ( To return to the Image Viewer window, press the <Esc> key or double-click the screen. ■ Watching a Slide Show while listening to Music To watch a slide show while listening to music, play music from MUSIC Station and run SlideShow.
Page 112 Editing an Image You can change the shape of an image, edit an image or apply special effects to an image. The image editor functions are described below. Select an image to edit in the Image Viewer window, and select the Image Editor tab. The Image Editor screen appears. The Image Editor screen consists of an Image Workspace window and 3 Tool tabs. Tool Tabs Zoom In / Zoom Out Edit the image using the Shape, Edit, and Effect tools. Shape tool: Change the shape of an image through cut, resize. Edit tool: Draw a line, add some clip art or enter letters. Effect tool: Apply various effects to an image. When finishing editing an image, click the Save Edited Image ( window. The edited image is saved. Image Workspace ) button below the Image Editor...
Page 113 Adding Images to the Library The PHOTO Library is a library holding image files to be used by PHOTO Station. The procedures to add image files saved on the computer to the Library are described below. You can add files, add folders or search and add files. As an example, the procedures to add folders are described below. Click the Register a File ( Library and click Add by Folders. Select a folder which includes image files and click OK. The image files in the folder are added to the Library. The image files used in AVStation are automatically added to the Library. ) button below the...
Page 114: Movie Station
Launch AVStation premium and click MOVIE on the Station Bar. MOVIE Menu Bar MOVIE Library Register a File Play Control Buttons Volume Control What is Enhanced Digital Image (EDI)? EDI (Enhanced Digital Image) is a visual quality enhancement technology developed by Samsung Electronics. You can view a clearer and sharper picture by enabling the EDI function when watching TV or playing a video on AVStation premium. However, some TV tuners and graphics cards are not supported by EDI. For information on EDS (Enhanced Digital Sound), see page p.104. Station Bar Video Play window Capture Button...
Page 115: Playing A Dvd
Playing a DVD The procedures to play a DVD title are described below. To play a DVD title, DVD playing software (for example, CyberLink PowerDVD) must be installed. Install the DVD playing software first. Launch AVStation premium and insert a DVD title into the DVD drive. In the What do you want Windows to do? window, select Play DVD Video using Samsung AVStation and click OK. The DVD title is played. If a DVD title is already in the DVD drive, double-click the DVD title in the DVD / VCD folder of the Library. The DVD title is played.
Page 116  The video is played in full screen. In full screen, move the mouse pointer to the bottom of the screen to show the Play Control bar. To play at the default screen size, press the <Esc> key or double-click the screen. ■ Capturing the Video Screen Click Capture Current Screen ( window when the desired image appears on the screen and click OK. Captured images are saved in the C:\Program Files\ Samsung\AVStation Premium xx\Data\Captured Images folder. In addition, you can view captured images in the PHOTO Station > Captured Images folder. ) below the Play...
Page 117 Adding Videos to the Library The MOVIE Library is a library holding video files to be used by MOVIE Station. The procedures to add video files saved on the computer to the Library are described below. You can add files, add folders or search and add files. As an example, the procedures to add folders are described below. Click the Register a File ( Library and click Add by Folders. Select a folder which includes video files and click OK. The video files in the folder are added to the Library. ) button below the The video files used in AVStation are automatically added to the Library.
Page 118: Chapter 6. Settings And Upgrade
Chapter 6. Settings and Upgrade LCD Brightness Control BIOS Setup Entering the BIOS Setup The BIOS Setup Screen Setting a Boot Password Changing the Boot Priority Upgrading Memory Using the Security Lock Port...
Page 119: Lcd Brightness Control
The LCD brightness has eight levels of degree. By pressing the Fn+ , the LCD gets brighter by one level of degree. LCD Brightness The LCD brightness settings for maximum battery mode, general mode, and maximum performance mode in Samsung Battery Manager are not maintained when your computer reboots. Only the LCD brightness setting in the user settings mode is maintained once you reboot the computer. For information on the other features of Samsung Battery Manager, see the description on batteries. To Maintain the Changed LCD Brightness After Reboot Configure the following settings to maintain the LCD brightness set using the screen adjustment key.  Turn on the computer. If the SAMSUNG logo appears, press the F2 key. Then, setup will start.  Change the value of Brightness Mode Control on the Boot menu to User Control.  Press the F10 key to save the change and complete setup.
Page 120: Bios Setup
BIOS Setup The BIOS Setup enables you to configure your computer hardware according to your needs. Before You Start! Use the BIOS setup to define a boot password, change the booting priority, or add a new device. ■ Since incorrect settings may cause your system to malfunction or crash, take care when configuring the BIOS. The functions of the BIOS setup are subject to change for product function enhancement purposes. ■ The BIOS Setup menus and items may differ depending on your computer model. Entering the BIOS Setup Turn the computer on. When the booting screen (SAMSUNG logo) appears, press the F2 key to enter the BIOS Setup.
Page 121 After a moment, the BIOS setup screen appears. The items in the BIOS setup may differ depending on the product. Setup Menu Help Help for the selected item appears automatically. Setup Items...
Page 122: The Bios Setup Screen
The BIOS Setup Screen Menu Description Main Used to change the basic system and environment settings. Advanced Used to configure advanced functions on your computer around devices and chipsets. Security Used to configure security functions, including passwords. Boot Used to set the boot priority and other boot options Exit Used to exit the Setup either saving the changes or not.
Page 123 System Setup Keys In the Setup, you have to use the keyboard. Press to view the Setup Help. Up & Down Keys Press to move up and down. F5/F6 Press to change the item value. Press to load the default Setup settings. Press to return to a higher level menu or to move to the Exit menu. Left & Right Keys Press to move to another menu. Enter Press to select an item or to enter a sub menu. Press to save the changes and exit Setup.
Page 124: Setting A Boot Password
Setting a Boot Password When setting a password, you have to enter a password to use the computer or enter the BIOS Setup. By configuring a password, you can restrict system access to authorized users only and protect data and files saved on the computer. Before You Start! Do not lose or forget your password. If you have forgotten your password, contact a Samsung service center. In this case, a service fee will be charged. Setting a Supervisor Password A Supervisor Password is required to turn the computer on or to start the System Setup. When setting a Supervisor Password, users other than a supervisor cannot use the computer. Select the Security menu in the BIOS Setup. In the Set Supervisor Password item, press <Enter>. Enter a password, press <Enter>, re-enter the password for confirmation, and press <Enter> again. The password can be up to 7 alphanumeric characters. Special characters are not allowed. When a message confirming the password configuration appears in the [Setup Notice] window, press <Enter>. The supervisor password has been set. The supervisor password is required to turn the computer on or to enter the BIOS Setup.
Page 125: Setting A User Password
Setting a User Password Users can start the system with a user password, but cannot enter the System Setup. By doing this, you can prevent other users from entering Setup. Before configuring a user password, a supervisor password must have been configured. Deactivating the supervisor password also deactivates the user password. In the Set User Password item, press <Enter> and complete the procedures from Step 3 of Setting a Supervisor Password. Deactivating the Password Press <Enter> on the password to be deactivated. For example, to deactivate a supervisor password in the Set Supervisor Password item, press <Enter>. In the Enter Current Password item, enter the currently configured password and press <Enter>. Leave the Enter New Password item field empty, and press <Enter>. Leave the Confirm New Password field empty, and press <Enter>.
Page 126: Changing The Boot Priority
Move to the IDE HDD using the ↓ key and press the F6 key to move it to the top. Boot priority order: ▼ IDE CD : xxxxxxxxxxxxxxxxxxx ▼ IDE HDD : SAMSUNG xxxxxxx ▼ USB KEY : Not Installed ▼ USB CDROM : Not Installed ▼ USB FDC : Not Installed ▼ USB HDD : Not Installed Select system boot ▼...
Page 127: Upgrading Memory
Upgrading Memory One or more memory modules are installed on the computer. There are 2 memory slots and users can replace the installed memory or add new memory. Before You Start! Replace or install new memory only after shutting the computer down completely. Do not replace or install memory when the ■ computer is in Sleep mode. To utilize the dual channel feature, using memory modules with the same specifications (of the same capacity and from the same ■ manufacturer) is recommended. Adding a Memory Module Remove the screw on the memory compartment cover at the bottom of the computer using a screw driver. Fixing Screw Insert a new memory module into the memory slot at an angle of approximately 30 degrees aligning it to the angle of the memory slot.
Page 128 Push the memory module down so that it is completely fixed. If the memory does not fit easily, push the memory module down while pulling the memory module latches outward. Close the memory compartment cover and fasten the screw. Removing a memory module Pull the memory module latches outward. The memory module will pop up. Remove the memory module out at an angle of 30 degrees.
Page 129: Using The Security Lock Port
Using the Security Lock Port You can connect a Kensington lock to the Security Lock port to prevent your computer being stolen when you have to use the computer in a public place. To use this feature, you have to purchase the Kensington lock additionally. To use the Kensington lock, refer to the product manual. Tie the Kensington lock cable to a fixed object and install the other end of the cable to the Security Lock port.
Page 130 Chapter 7. Appendix Using McAfee SecurityCenter Using Samsung Magic Doctor Diagnosing the System Reinstalling Software Running the system software Media Installing drivers and programs Questions and Answers Windows Related Display Related Sound Related Modem Related Wired LAN Related Wireless LAN Related Games and Programs Related Security Center Other Questions Product Specifications Glossary Index Contact SAMSUNG WORLD WIDE...
Page 131: Using Mcafee Securitycenter
Using McAfee SecurityCenter A computer virus is a program that damages computer files and information saved on a computer. A computer is infected by an already infected file or by another computer over the Internet. Let’s learn how to use McAfee SecurityCenter in order to scan and remove viruses and to protect your computer from various threats on the Internet.
Page 132: Using Samsung Magic Doctor
Using Samsung Magic Doctor Magic Doctor is troubleshooting software provided by Samsung Computer. A user can diagnose system problems via one-click or by selecting diagnostic items. Before You Start! The screens used in this manual may differ from actual screens according to the program version. Diagnosing the System Select Start > All Programs > Samsung > Samsung Magic Doctor > Samsung Magic Doctor. Click the Diagnose the System icon. The system status diagnostics start. When the system status diagnostics are complete, the diagnostics result appears. If a problem has been found, click on Cure for Samsung Magic Doctor to cure the problem.
Page 133: Reinstalling Software
Reinstalling Software If you have reinstalled the Windows operating system, or the system and program do not operate properly, you can re-install the driver and program using the system software Media. Before You Start! This computer is optimized for Microsoft Windows XP, therefore drivers for other operating systems are not included on the System Software Media. Running the system software Media Insert the system software Media into the CD-ROM drive. The initial screen appears automatically. ■ Standard Installation: This displays a list of drivers or programs that are not currently installed on your computer from the system software Media provided.All necessary components are installed using the factory defaults. ■ Minimum Installation: This displays the components (driver, Windows programs,etc) that, if not installed, may cause problems with the system performance.You can install only required components. ■ Custom Installation: You can customize the installation of drivers and programs.
Page 134: Installing Drivers And Programs
Installing drivers and programs Click Standard Installation in the main window of the System Software Media. (Standard Installation is recommended) The system is scanned to display the drivers and programs that need to be installed. Click OK. The drivers and programs are automatically installed as factory defaults. When done, restart the system.
Page 135: Questions And Answers
Questions and Answers This section provides information on possible problems, solutions and other references for system use. Windows Related The system does not shutdown properly. When the system does not shutdown normally, press and hold the Power button until the system manually shuts off. If the Power-Saving Mode is configured into the Power button, press and hold for more than 4 seconds to shut the system off. When the system is turned on after such manual shutdown, Scandisk will run to check errors in the system. The system freezes during program operation. A1 There is an error with the program currently being used. Press the <Ctrl>, <Alt>, and <Delete> keys simultaneously and click End Task in the Windows Task Manager window. A2 There is an error with the Windows OS. Reboot the system by using the Power button. Display Related The LCD screen is too dark or too bright Turn on the LCD backlight or adjust the screen brightness. Press Fn + (...
Page 136 In the following cases, the screen blinks or displays noise for a short time (This only applies to nVidia graphics card.): (Click the Graphics Related tab, Change Resolution, Change Display Device, Remove the AC Adapter, Restart the System, Change PowerMizer level.) This may happen while the video driver is examining the connected device. While detecting, any connected display devices may blink or some...
Page 137 USB keyboard, may cause the key input to be recognized as multiple key inputs depending on the keyboard input recognition time. In this case, the MS-DOS command prompt is repeatedly switched to full screen and then to Windows several times. Please press the <Alt>+<Enter> keys more quickly, or press the <Alt>+<Enter> keys using the system keyboard. Pressing the shortcut key on the keyboard does not show the Samsung Display Manager icon. The Samsung Display Manager icon only appears when both the Magic Keyboard and the Samsung Display Manager program are installed. I cannot set up Dual View properly. (For Intel Graphics only.) This may happen when Clone mode is selected for an external monitor. Press the <Fn>+<F4> key combination to select LCD and try to set up Dual View again.
Page 138: Sound Related
▶ Sound Driver Components The sound driver consists of the following 3 components and the 3 components are automatically installed during the installation. – High Definition Audio - KB888111: Microsoft UAA Bus Driver for High Definition Audio. – SoundMAX: SoundMAX Integrated Digital HD Audio. – Samsung EDS ▶ Uninstalling the Sound Driver To remove the sound driver due to a problem or for an update, follow the procedures below. If you do not follow the sequence below, the sound driver may not be removed or the reinstalled driver, or may not work properly.  Select Start > Control Panel > Add or Remove Programs.
Page 139: Modem Related
▶ Installing the Sound Driver after a Windows XP Reinstallation If you install the sound driver after reinstalling Windows XP, the Add Hardware Wizard (Modem Device) window may appear during the sound driver installation. This happens because the High Definition Audio KB888111 Hotfix, which has been installed on your system, has changed the settings to search for both sound and modem devices. If you install the modem device, this message will not appear. If necessary, install the modem device together. The number of the High Definition Audio—KB888111 Hotfix may differ if you have updated the Hotfix from the Microsoft web site. Modem Related I cannot hear the modem sound. A1 Check that the telephone line is properly connected to the modem. A2 Check that the modem driver is installed properly. —  Click Start > Control Panel > Performance and Maintenance >...
Page 140 I cannot make a call using an extension line. In general, the dial tone of a PBX or a digital phone switching system is not a continuous one, unlike that of a trunk line. Therefore, the modem may not make a call because the modem mistakes the dial tone from a PBX or a digital phone switching system as a busy tone. In this case, complete the following procedures. ▶ Using an AT command As an initialization command, use the command, ATX3. Otherwise, enter the ATX3 command manually before making a call. It can correct this problem by skipping the dial tone check step. ▶ Configuring the Modem through the Control Panel  Click Start > Control Panel > Network and Internet Connections.
Page 141: Wired Lan Related
How do I receive a fax while the system is in power saving mode (Rest mode)? To receive a fax in Standby mode, you have to set it up as follows.  The automatic fax reception function of the fax program needs to be activated. (For more information, see the corresponding fax program manual.)  Click Start > Control Panel > Network and Internet Connections.  Under See Also, click Phone and Modem Options.  In the Power Management tab of the Modem Properties window, select the “With this device, exit the computer from stand-by mode” item and then click The above setting enables the modem to turn on...
Page 142: Wireless Lan Related
 Click My Network Place> View network connections on the Desktop.  Right-click over Wireless Network Connection and select Disable. A2 The <Wake On LAN> function is configured so that it is supported in Standby mode (S3). To use this function in Hibernation mode (S4) or in the Turn Off (S5) state, configure it as follows:  Enter BIOS SETUP and select the Boot menu.  Move to the Wake On Lan item and press the Enter key. Change it from Disabled to Enabled and press the Enter key.
Page 143  Click Start > Control Panel > Performance and Maintenance > Administrative Tools > Computer Management and click Services and Applications > Services. In the right pane, double-click Wireless Zero Configuration and check if the Startup Type is Automatic and the Status is Started. I cannot connect to an AP. (The wireless connection is disconnected frequently.) ▶ Check the Network Key. Right-click the Wireless Network Connections icon from the Taskbar and click View available wireless networks. If wireless networks are...
Page 144 ▶ Check the AP settings. A1 Check if the surroundings are appropriate for a wireless LAN. A wireless LAN connection may be limited by the surrounding environment and distance. Obstacles such as walls and door mats affect the quality of the wireless LAN signal. You have to install an AP in a high, open position far away from any other radio signal sources. If the AP is excessively far away, or is installed at the end of a building and you are attempting to use the wireless LAN from the other end, you may not be able to use the wireless communication normally because the signal is blocked by obstacles between you and the AP (such as a wall). A2 Check if the AP operates properly. If the AP is not operating properly, turn it off and on again and try again. A3 Check if the AP firmware is the latest version. (For more information on the AP firmware, ask the AP manufacturer or your product provider.) A4 Check if the AP is properly connected to the network. Connect the LAN cable from the AP to a computer and check if the network is connected properly. A5 Check the Network Key (Encryption Key) settings again. If the automatic password converting function (passphrase function) is...
Page 145 Although a connection has been established, I cannot connect to the Internet. ▶ Check the TCP/IP settings. If you cannot connect to the Internet but you are connected to an AP, check if the TCP/IP settings are configured properly. When you are not connected to an AP, an X mark appears over the ‘Wireless Network Connections’ icon ( ) in the Taskbar. If you double-click the icon, the Search for Wireless Connections window appears. Reconnect to a wireless network referring to the descriptions of Connecting to a Wireless LAN in the Using the Network section. When you are connected to an AP, an X mark appears over the “Wireless Network Connections” icon ( ) in the Taskbar. Double-click the icon and check if the IP address is properly allocated on the Support tab. If the IP address is not properly allocated, the IP address will be displayed as follows;...
Page 146: Games And Programs Related
(For Intel PROSet) After installing PROSet, I cannot manage my wireless network in Windows. When clicking Use Microsoft Client in the Tools menu of the PROSet, you can manage wireless network in Windows. Thereafter, if you wish to manage your wireless network, click Activate Intel PROSet/Wireless in the Tools menu of the PROSet. Games and Programs Related 3D game is not executed, or some functions are not working.
Page 147 While playing a game, pressing the Fn + ( keys does not work or the screen is not properly displayed. Some games and 3D application programs may change the display device control. Therefore, pressing the Fn + ) keys may terminate the running program or may display an abnormal screen. Press the Fn + ( ) keys before launching a program and do not press them while running the program. Running speed of a game is too slow or fast. Change the setting of Power Schemes to “Always On.”...
Page 148 The game play screen frequently stops and starts. [nVidia Graphics] This may occur when the PowerMizer Setting is set to Maximum Power Saving Function or Balanced.  Right-click the Desktop and select Properties from the pop-up menu.  In the [Display Properties] window, select the Settings tab > Advanced > Ge-Force Go xxxx tab.  Select the PowerMizer item, slide the AC outlet and the battery sliders to Maximum Performance and then click the Apply button. The picture is not displayed properly for some games.
Page 149: Security Center
Security Center To change the popup window display settings when connected to the Internet. In the Windows XP SP2 environment, you can decide whether to display a popup window when connected to the Internet, for user convenience and security. A1 To display most of the popup windows when connected to the Internet:  Click Internet Options in Start >...
Page 150 When you see a Windows Security Alert icon ) appear on the right part of the Taskbar. With the Security Center feature added, Windows XP SP2 checks the Firewall, the automatic updates configuration and installation of virus-checking programs to display a Windows Security Alert icon on the right part of the Taskbar when it judges that the computer is vulnerable to attacks from the Internet.
Page 151: Other Questions
A5 If Windows does not recognize the existence of an anti- virus program even when it has been installed, your computer could be vulnerable to attacks from the Internet. You should install an anti-virus program that your computer is able to identify. Check the following programs which Windows can detect and select one from the list. A list of anti-virus programs that Windows can detect: - Symantec Norton Anti-Virus - NetworkAssociates (McAfee) - TrendMicro - ComputerAssociates - Panda - Kaspersky - Ahnlabs (AhnLab) Visit the Microsoft Web site (www.microsoft.com) regularly to check the latest list. Other Questions 4GB memory capacity is not properly recognized by Windows. Windows XP SP2 cannot display a memory capacity over 4GB due to license and driver compatibility problems. Even if the system information shows only 3GB of memory, the system memory capacity is 4GB and is normal.
Page 152: Product Specifications
Wired LAN : Realtek RTL8100C(L) 10/100 Wireless LAN : 802.11BG Multi Card Slot Memory Stick / Memory Stick Pro / SD Card / xD Card / MMC / MMC Plus USB 2.0 x 5, Video(monitor) and TV Out(S-VIDEO), Headphone, Microphone, Modem Ports Security Lock Port, AV In Dimensions 374.5 x 331 x 45.8~58.1 mm 17” SXGA (1280x1024) Weight 4.95Kg(May differ depending on the specification.) Operating Temperature : -5~40°C for storage, 10~32°C when operating Environment Humidity : 5~90% for storage, 20~80% when operating Operating Voltage 100 - 240VAC Frequency 50 / 60Hz Output Power 90/120W Output Voltage 19VDC The ( ) mark represents optional components. Optional components may not be provided or different components may be ■ provided depending on the computer model. The system specifications are subject to change without notice. ■ The hard disk drive capacity of a computer in which Samsung Recovery Solution II is installed, is represented as smaller than ■ the product specification. , TV Antenna , Wired LAN, DC Jack,...
Page 153 Wireless LAN Specifications (802.11BG Card) Atheros Wireless Network Adapter Device  The Name of the Registered Equipment : Special Low Power Wireless Device for Wireless Data Communication Systems. Item Dimensions Physical Operating Specifications Temperature And Humidity Sleep Mode Power Receive Mode Specifications Transmission Mode Power Compatibility Operating System Network Specifications Media Access Protocol (MAC) Security * This device supports the Wireless LAN Security Specifications WPA (Wi-Fi Protected Access) for Wi-Fi. To connect to a WPA wireless network, you have to configure the settings according to the network connection environment. For detailed setting information, ask your network administrator.
Page 154  Radio Specifications RF Band 2.4GHz Supported Channels Channels allowed per country. Device Transceiver Modulation Scheme 11b mode : DSSS, CCK 11g mode : OFDM Standard Output Power MAX 10 mW 11g mode*** : 54, 48, 36, 24, 18, 12, 9, 6 Data Rate (Mbps)* 11b mode : 11, 5.5, 2, 1 Antenna Type Built-in Antenna 2 EA (Main/Aux) * The data rate may differ from the real data transmission rate. ** 11g mode is only supported when the device is connected to an IEEE 802.11g device. (e.g. Access Point supporting IEEE 802.11g)
Page 155 Registered Trademarks Samsung is a registered trademark of Samsung Co., Ltd. SENS is a registered trademark of Samsung Electronics Co., Ltd. Intel, Pentium/Celeron are registered trademarks of the Intel Corporation. Microsoft, MS-DOS, and Windows are registered trademarks of the Microsoft Corporation. “Memory Stick” and are trademarks of the Sony Corporation. All other product or company names mentioned herein are registered trademarks of their respective companies. Macrovision Certification This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. About the Product Capacity Representation Standard The capacity of the storage device (HDD, SSD) of the manufacturer is calculated assuming that 1KB=1,000 Bytes. However, the operating system (Windows) calculates the storage device capacity assuming that 1KB=1,024 Bytes, and therefore the capacity representation of the HDD in Windows is smaller than the actual capacity due to the difference in capacity calculation. (E.g. For a 80GB HDD, Windows represents the capacity as 74.5GB)
Page 156: Glossary
Glossary The Glossary lists the terminologies used in this User Guide. For terminologies other than these, look in Windows Help. Backup A way to save the current data to restore it later if necessary. A backup is a way to restore computer data when the data or computer is damaged. Client This refers to a computer that uses a shared network resource provided by a server. DDR SDRAM (Double Data Rate Synchronous Dynamic Random Access Memory) DRAM is a memory type whose cells consist of a capacitor and transistor manufactured at a low price. SDRAM is a memory type whose performance has been improved by synchronizing the clock with the external CPU clock. DDR SDRAM is a memory type whose performance has been improved by doubling the operating speed of the SDRAM and is widely used nowadays. This computer uses DDR SDRAM. Device Manager An administrative tool used to manage computer devices. You can add or remove hardware or update a device driver using the Device Manager. Direct X An application interface developed to enable Windows application programs to access hardware devices at a very high speed. Since the operating speed of graphics, memory and sound cards must be very fast to provide high quality video and sound for games, Direct X enables faster control and interaction between...
Page 157 Firewall A security system used to protect an internal network or intranet from external networks through an authentication procedure. Hibernation Mode A power mode that saves all data in memory to the hard disk and turns the CPU and hard disk off. When canceling Hibernation Mode, all application programs that were running are restored to their last state. Icon This refers to a small image that represents a file that users can use. LAN (Local Area Network) A communications network connecting computers, printers and other devices within a local area such as within a building. A LAN enables all connected devices to interact with other devices on the network. The current LAN uses the Ethernet media access control method developed in the early 1980s. To connect to an Ethernet, a network card called a LAN card, Ethernet card or network interface card is required. To exchange data between computers, a protocol is required besides the hardware equipment. Windows XP uses TCP/IP as the default protocol. LCD (Liquid Crystal Display) There are Passive Matrix and Active Matrix LCD types. This computer uses the Active Matrix type LCD called a TFT LCD. Since an LCD is implemented by transistors instead of a cathode-ray tube unlike a CRT, its size can be slim. And because it does not blink, it reduces eye strain. Network A group of computers and devices, such as printers and scanners, connected by a communications link. A network can be either small or large and can be connected permanently through cables or temporarily through telephone lines or wireless links. The biggest network is the Internet, a worldwide network. Notification Area This refers to the right area of the Taskbar including program icons such as the volume control, the power options and the time.
Page 158 Quick Launch This refers to a toolbar that can be configured so that you can launch a program such as Internet Explorer or display the Windows Desktop with one click. You can add any icon to the quick launch area of the Taskbar and launch frequently used program by clicking that icon. Server In general, a server refers to a computer that provides shared resources for network users. Share This refers to setting a resource of a computer such as a folder or printer so that other users can also use it. Shared Folder A folder that can be used by other users on the network. Network Administrator A user who plans, configures and manages network operations. Sometimes, a network administrator is called a system administrator. Sleep Mode A power mode that enables computers to save power consumption when they are not being used. When a computer is in Sleep Mode, the data on the computer memory is not saved to the hard disk. If the power is tuned off, the data in memory will be lost. System File System Files refer to files that are read and used by the Windows operating system. In general, system files must not be deleted or moved.
Page 159 USB (Universal Serial Bus) This refers to a serial interface standard developed to replace the conventional interface standards such as Serial and PS/2. While USB 1.1 supports 12Mbps (12 million bits per second), USB 2.0 supports a data rate that is 40 times (480Mpbs) faster than that of USB 1.1. The data rate of USB 2.0 is equivalent to that of IEEE1394. Therefore USB 2.0 is used for A/V devices supported by IEEE 1394 and a 2nd HDD and CDRW that require a high data rate. Windows The name of an operating system developed by the Microsoft Corporation. Windows XP is installed on this computer. Windows Media Player A multimedia program included with Windows. Using this program, you can play a media file, create an audio CD, listen to a radio broadcast, search and manage media files, and copy files to a portable device, etc.
Page 160: Index
Index BIOS Setup Booting Priority CD Drive / Recording Click Connect / Output Monitor Control Panel CyberLink PowerDVD Dual View Desktop / Change Help LCD Brightness Memory Multi Card Slot Network Network Status Diagnosis Password Phone Connection Play AVStation Playing Music Product Specifications Program Recorder Resolution / Color Samsung Network Manager Samsung Update Plus Security Lock Port Safety Precautions Shortcut Keys Status Indicators Touchpad User Accounts / Switch User 67 Video Play Volume Control Windows XP Wired Network Wireless Network...
Page 161: Contact Samsung World Wide
Contact SAMSUNG WORLD WIDE [U.S.A. / U.K. / AUSTRALIA / HONG KONG / MALAYSIA / SINGAPORE] Contact SAMSUNG WORLD WIDE If you have any comments or questions regarding a Samsung products, contact the SAMSUNG customer care center. Customer Care Center U.S.A. U.K. AUSTRALIA HONG KONG MALAYSIA SINGAPORE [FRANCE] Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung.
Page 162 [ITALY] Contatta SAMSUNG Se hai commenti o richieste sui prodotti Samsung contatta il nostro Servizio Clienti. Customer Care Center ITALY [RUSSIA / UKRAINE] Customer Care Center RUSSIA UKRAINE [CHINA] Customer Care Center CHINA [THILAND] Customer Care Center THAILAND 199 153 153 8-800-200-0400 8-800-502-0000 800-810-5858 / (010) 64751880 1800-29-3232 / 02-689-3232 Web Site www.samsung.com/it/ Web Site www.samsung.ru www.samsung.com/ur Web Site www.samsung.com.cn...

This manual is also suitable for:

G15 G16

Samsung NP-G15 User Manual

Chapter 1. Getting Started

Table of Contents

Chapter 2. Using the Computer

Chapter 3. Using Microsoft Windows Xp

Chapter 4. Using the Network

Chapter 5. Using Applications

Chapter 6. Settings and Upgrade

Quick Links

Chapters

Related Manuals for Samsung NP-G15

Summary of Contents for Samsung NP-G15

This manual is also suitable for:

Table of Contents