•
Connecting six chassis to one power shelf
Cable quantity and length are determined by the configuration of components. For more information, see the
HP Power Advisor (http://www.hp.com/go/hppoweradvisor).
Example configurations
Configuration examples can be calculated using the HP Power Advisor Tool
(http://www.hp.com/go/hppoweradvisor). This tool is designed for facilities planning purposes only.
Values obtained from the tool are based on worst case loads. Whenever possible, HP recommends using
actual measurements in configuration planning. Measurements must be made with the intended
configuration, application loading, and ambient environment.
Actual power usage will vary, depending on application loading, ambient temperature, and other factors.
Cabling 30