Use Of The Oil; 10. Troubleshooting Solution - Bosch TCE 260 Operation Manual

8. If the lifting device moves too slow and the co-
lumn tilts too slow, you should operate as per the
following steps shown in figure below. Clean the
silencer.
$
Before any operation, switch air supply and power
supply.
$
Detach the side panel on the machine cabinet.
$
Adjust the silencer A and B on the adjust valve
assembly.
$
Or use the high pressure air to clean. Change the
silencer if it is damaged.
9.3

Use of the oil

1. Treatment of waste oil: Do not expose the waste oil
that can be volatile to the air or directly drop into
the sewer/ river. You should dispatch it to the profes-
sional treatment company to treat.
2. Oil overflow and leakage: Prevent the oil from
entering into the soil, sand or any other absorbent.
To the residual oil, you must use the cleaning sub-
stances that can solute oil to treat. The cleaning
agent must comply with the local law and regulation
requirements.
3. Warning to use the oil:
$
Avoid direct contacting the skin.
$
Do not let the oil form oil fog and diffuse into the
air.
4. We must meet the following safety requirement:
$
Avoid the oil from splashing and touching the
skin, the surface of machine and protective cover
of the machine.
$
Often use wash and soap to wash your hand. Do
not use the detergent stimulating skin and sub-
jects harmful to the skin.
$
Do not use the rag to clean your hands.
$
Do not wear the oily clothes, while you must
change the working suit after finished the work.
$
Do not smoke and eat with the oily hand.
Robert Bosch GmbH
Troubleshooting solution | TCE 260 | 21
5. Meanwhile, take the following measures:
$
The gloves should be oil-proof.
$
Wear goggle to prevent the splash of the oil.
$
Wear aprons to prevent the oil.
$
Apply protective screen to prevent the splash of
the oil.
6. It is forbidden to inhale, swallow of oil. And forbid-
den the splash of the oil and prevent oil from tou-
ching skin.
R
Firefighting material
As per the following table:
Solid Liquid
Water YES NO
Foam YES YES
Dry pow- YES* YES
der
CO2 YES* YES
YES* : The material used should be used by the profes-
sional firefighting.
Note
The above information is only for the purpose to provi-
de the user with the basic guidance. The detailed infor-
mation should contact the fire management agency.

10. Troubleshooting solution

All the problems should be checked and solved
by the professional personnel. If you have no professi-
onal personnel, you must contact the dealer to get the
related technical service for fear of wasting time.
1. Turntable can not rotate
R
Short circuit
$
Check cable of motor;
$
Change motor;
$
Check the plug;
$
Check the reversing switch/ change reversing
switch;
$
Check the driven parts of the reversing switch;
$
Adjust the belt/ change the belt.
2. The pedal can not back to its original position
R
The spring is damaged
$
Change the spring.
3. Bead blade can not separate the tire edge
R
The cylinder sealing kits is worn
$
Change the sealing kits;
$
Change the new cylinder.
4. Air leakage at the center of the cylinder
R
The cylinder sealing kits is worn
$
Change the sealing kits;
$
Change the cylinder.
5. Worm case can not work or the noise is too much
R
The worm case assembly is damaged
$
Change the worm case.
en
Electrical equipment
NO
NO
YES
YES
|
1 987 AT7 374 2015-09-02