Cleaning And Maintenance - PURE Mistaire Eva User Manual

INSTALLING
&
REMOVING THE FILTER
NOTE: The filter will last approximately 6 months, depending on local air
quality and water hardness.
The "FILTER RESET" light will turn on when it's time to replace the filter.
1. Lift and remove the top housing by holding the sides of the housing. Do
not lift from the control panel.
2. Remove the filter from the tank and insert the new filter into the unit.
Make sure the plastic portion of the filter is installed upwards and the
open end is facing the bottom of the tank and is flush with the base.
3. Add water to the MAX fill line of the tank.
4. Reattach the top housing of the unit and securely latch into place.
5. Press and hold the Power button for 3 - 5 seconds to reset the
Filter Reset indicator.
CLEANING
&
MAINTENANCE
Turn the unit off and disconnect the power plug before cleaning.
NOTE: Be sure you are near a sink or other water-resistant area before
cleaning.
1. Daily maintenance
a. Fill the tank with clean water and clean it with warm water and a
soft cloth once every l to 2 days.
2. Cleanlng the tank
a. Lift and remove the top housing.
b. Remove the filter and the float.
c. Rinse the tank using warm water and a soft cloth.
d. Install the float and filter and make sure they are installed securely
and correctly.
10