Huawei CP39S Quick Start Manual page 3

1. Install the wireless car charger.
a. Plug the standard charging cable into the DC port to
connect the wireless charger to the cigarette lighter port.
b. Press the clip release button on the back of the wireless
charger to open the clip
c. Attach the wireless charger onto your car's air vent.
After the installation is successful and when the car is started,
the wireless charger will initialize and the charging indicator
light will flash once.
• This product only supports standard 10 V/4 A, 5 V/4.5 A,
and 9 V/2 A smart charge protocol (SCP), fast charge
protocol (FCP), and Quick Charge (QC) protocol car
chargers that comply with the RED requirements of the CE
certification.
• This product does not support low power USB car chargers,
including 5 V/2 A, 5 V/1 A, and 5 V/0.5 A USB chargers,
and non-standard fast charging USB car chargers. If you
use any of the preceding chargers, the indicator light will
keep flashing.
• Do not use the standard charging cable of this product with
other electronic products.
2