Advertisement
Due to a policy of continuous improvement and product development, Duscholux reserves the right to amend specification without notice.
Issue 1 - 07/11
Showerlux Product made by The Duscholux Group
Showerlux Product made by The Duscholux Group
Showerlux Spares Shop
Showerlux Spares Shop
www.showersealspares.co.uk
SL634
Advertisement
Table of Contents
Related Manuals for ShowerLux LINEA TOUCH
Summary of Contents for ShowerLux LINEA TOUCH
- Page 1 Showerlux Product made by The Duscholux Group Showerlux Product made by The Duscholux Group Showerlux Spares Shop Showerlux Spares Shop www.showersealspares.co.uk Due to a policy of continuous improvement and product development, Duscholux reserves the right to amend specification without notice.
-
Page 2: Installation Instructions
If installing with Side Panel please also read the side panel instructions carefully ● before assembly and installation. Please note that this is a dual Installation Instruction for both the Linea Touch and ● Glide product type. Linea Touch is the product type shown throught this Instruction. -
Page 3: Hints And Tips
● this product. We recommend that this product is cleaned with ● Showerlux ‘Showerclean’ once a week. This will help to reduce the build up of lime scale. Showerlux enclosures and screens are generally ● maintenance free. However, it may be necessary to lubricate roller assemblies or other moving hinge parts occasionally. -
Page 4: Equipment Needed
488 Measuring Glass squeegee ..x 1 tool .... x 1 Linea Touch Handle..x 1 EQUIPMENT NEEDED ● Crosshead screwdriver ● Drill ● 8mm Masonry bit ● Hammer ● Rubber mallet ● Tape measure ● Pencil ● Fine tooth saw ● Spirit level ● Masking tape ● Silicone sealant / Applicator ● De-greaser e.g White spirit... - Page 5 Before installation choose which side you want to open the unit from. The current illustrations show a left hand installation with the door opening from right to left. Should you require a right hand installation, rotate the unit from top to bottom for the opposite configuration to the one shown.
- Page 6 Attach the door handle (I) to the door as shown above. should you require it. The enclosure should sit with an even N.B. Linea Touch Handle: Please ensure that the door knob gap all along the front of the tray with no part overhanging.
- Page 7 STEP 8 Outside enclosure Drip deflector Drip Bottom deflector of door (Z5) Bottom of door Remove packing blocks shown in step . Measure between the frame and the pivot block, then with the drip deflector (Z5) cut a short piece from it, to the same length as that measured. Fit this short piece between the frame and the pivot block with the drip deflector to the outside of the enclosure as illustrated above.
- Page 8 STEP 11 STEP 12 Inside Place the correctly handed frame caps (T & J) as shown and From the inside of the shower enclosure, silicone the entire fix using 13mm countersunk screws (M). vertical length of the wall channels up against the walls. Push-fit all eight screw hole plugs (B) as shown.
- Page 9 Issue 1 - 07/11...
- Page 10 Linea Touch Handle Assembly - 24828. 31115 6011 5117 01744 6059 01748 Issue 1 - 07/11...
- Page 11 Glide Handle Assembly - DS-2-123. 0301 03014 0301 03014 Issue 1 - 07/11...
- Page 12 This page is intentionally blank. Issue 1 - 07/11...
Need help?
Do you have a question about the LINEA TOUCH and is the answer not in the manual?
Questions and answers