Installing The Pc Software - Olympus E-M10 Mark III S Instruction Manual

4
The computer recognizes the camera as a new device.
• If you are using Windows Photo Gallery, choose [MTP] in Step 3.
• Data transfer is not guaranteed in the following environments, even if your computer is
equipped with a USB port.
Computers with a USB port added by means of an extension card, etc., computers
without a factory-installed OS, or home-built computers
• Camera controls cannot be used while the camera is connected to a computer.

Installing the PC software

Install the following software to access the camera while it is connected directly to the
computer via USB.
Olympus Workspace
This computer application is used to download, view, and edit photos and movies recorded
with the camera. It can also be used to update the camera firmware. The software can be
downloaded from the website below. Be prepared to provide the camera serial number when
downloading the software.
https://support.olympus-imaging.com/owdownload/
6
131
EN