Standard Multipath Driver (Msdsm) For Windows Server - Fujitsu ETERNUS DX Configuration Manual

Chapter 7 Installing the Drivers
7.2 Multipath Environment Configuration
7.2.2

Standard Multipath Driver (msdsm) for Windows Server

This section describes how to configure the environment to use the standard multipath driver (msdsm) for
Windows Server
®
Server 2008 R2, and Windows Server
7.2.2.1 Installing Multipath I/O
1
Click [Add Features] in the [Server Manager] screen.
Select the "Multipath I/O" checkbox in the "Features" screen of the Add Features Wizard, and install the
Multipath I/O function.
2
Reboot the server.
7.2.2.2 Detailed Setup for MPIO
Perform settings to apply the installed Multipath I/O to the ETERNUS DX.
1
Click [Control Panel] — [MPIO].
The MPIO properties window appears.
® ®
2019, Windows Server 2016, Windows Server
®
2008.
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Windows
Copyright 2020 FUJITSU LIMITED
®
2012 R2, Windows Server
22
®
®
2012, Windows
®
P3AM-3442-18ENZ0