Download Print this page
Smiths Medical CADD-Prizm VIP 6100 Quick Reference Card

Smiths Medical CADD-Prizm VIP 6100 Quick Reference Card

Ambulatory infusion pump
Hide thumbs Also See for CADD-Prizm VIP 6100:

Advertisement

Quick Links

Alarms and Troubleshooting
The CADD-Prizm
pump signals with audible alarms
®
and messages on the display when a condition requires
your attention. In addition to referring to this table, use
the ? key while the alarm is occurring for information
about the alarm and corrective action.
Reservoir Volume Low
Level of fluid in the reservoir is low. Prepare to install a
new reservoir.
Reservoir Volume Zero
Reservoir volume is 0.0 mL. Press NEXT to stop alarm.
Install new reservoir if appropriate.
9-volt battery Low
9-volt battery is low but pump is operable. Change
battery soon.
9-volt battery Depleted
9-volt battery is depleted and cannot operate pump;
install fresh battery immediately.
High Pressure
Possible blockage downstream (between pump and
patient), clamp or kink in fluid path. Find cause and
remove blockage to continue.
Or, press STOP/START to stop pump and silence alarm;
remove blockage and restart pump.
Upstream Occlusion (Model 6101 only)
Fluid is not flowing from the reservoir to the pump.
Check for a kink, a closed clamp or an air bubble in
tubing between reservoir and pump.
Press STOP/START to silence alarm; remove
obstruction and restart pump.
Error Detected
Pump fault occurred. Close tubing clamp, remove pump
from service.
Air In Line Detected
Air in fluid path. Press NEXT to silence alarm. Make
sure tubing is threaded in Air Detector properly. If fluid
path contains air, close clamps, disconnect from patient
and prime fluid path.
3 beeps Every 5 Minutes; Stopped on Main Screen
Pump is stopped. Start pump if appropriate.
WARNING: This Quick Reference Card should be used
by clinicians only. Do not permit patients to have access
to this card, as the information would allow access to all
programming and operating functions.
Recordkeeping Functions
The pump may be running or stopped to view functions.
To View Event Log
1.
Press OPTIONS.
´
Î
2.
Press
or
until Event Log option appears.
3.
Press ENTER to display Event Log.
Î
4.
Press
to page back through Event Log entries or
´
to page forward.
5.
When finished, press NEXT.
To Clear Milliliters Given
1.
Stop the pump.
2.
Press NEXT repeatedly until Milliliters Given screen
appears.
3.
Press ENTER to clear and update date and time.
Product(s) described may not be licensed or available for sale in Canada or other
countries outside of the United States.
Smiths Medical ASD, Inc.
6000 Nathan Lane North
Minneapolis, MN 55442, USA
Tel: 1-614-210-7300
Toll-Free USA: 1-800-258-5361
www.smiths-medical.com
Smiths Medical Canada Ltd.
Markham, Ontario, Canada, L3R 4Y8
Phone: 905-477-2000
Toll-Free: 1-800-387-4346
CADD, CADD-Prizm, the Medication Cassette Reservoir design, and the Smiths
Medical design mark are trademarks of Smiths Medical. The symbol ® indicates
the trademark is registered in the U.S. Patent and Trademark Office and certain
other countries. ©2018 Smiths Medical. Product referenced is CE-marked.
All rights reserved.
IN19808EN-012018
B
C
D
E
H
A.
Green indicator light: blinks
when pump is running
B.
Amber indicator light: blinks
when pump is stopped
or alarming
C.
Polemount bracket recess
(back of pump)
D.
Power jack (for power pack
or AC adapter)
CADD-Prizm
Ambulatory Infusion Pump
Quick Reference Card for Clinicians
Keypad
STOP/
Stops and starts the pump
START
LOCK
Displays or changes lock level (security level)
?
Help key: displays more information about a screen
MPAUCA-1601
Sets new value; selects choice from menu; clears
ENTER
screen
Advances to next programming screen; backs out of
NEXT
an option or menu
DOSE
Inoperable in Continuous delivery mode
OPTIONS
Displays the Options Menu, pages through options
Answers yes; increases values on programming
´
screen; pages through menus; pages through Event
Log
Answers no; decreases values on programming
screen; pages through menus; pages through Event
Î
Log
A
S
OP TI ON
EN TE R
ST OP
F
ST AR T
Y
NE XT
LO CK
N
DO SE
?
G
®
E.
Data in/out jack (for printer
or modem cable)
F.
Battery compartment (side
of pump)
G.
Cassette (part of reservoir
or administration set that
attaches to pump)
H.
Air Detector
VIP
®
Model 6100 and 6101
Continuous Lock Level 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the CADD-Prizm VIP 6100 and is the answer not in the manual?

Questions and answers

Summary of Contents for Smiths Medical CADD-Prizm VIP 6100

  • Page 1 CADD, CADD-Prizm, the Medication Cassette Reservoir design, and the Smiths Answers no; decreases values on programming to this card, as the information would allow access to all Medical design mark are trademarks of Smiths Medical. The symbol ® indicates screen; pages through menus; pages through Event Î...
  • Page 2 Pump Operations Adjusting the Program Changing the Cassette To View Current Lock Level The Continuous Rate may be adjusted within the limits To Remove Used Cassette programmed in Lock Level 0. Press LOCK. Stop the pump. To Adjust the Continuous Rate Press NEXT to return to original screen.

This manual is also suitable for:

Cadd-prizm vip 6101