Example circuits
A.2 Control circuit connection
A.2.6
Wiring for remote RESET
Procedure
Result
You can reset a pending fault message by operating the reset button for > 4 s.
A.2.7
Connecting the evaluation unit to the analog output
Requirements
• 3RW51 soft starter with analog output
• Evaluation unit for displaying the analog output signal
• Parameterized analog output
Parameterizing analog output AQ via the 3RW5 HMI High Feature (Page 82)
Procedure
Connect the evaluation unit:
184
Voltage at terminals AQ- / AQ U+
Current at terminals AQ- / AQ I+
Equipment Manual, 09/2020, A5E37108631002A/RS-AC/003
SIRIUS 3RW51 Soft Starter