Headlight
Warning
Adjust road speed to suit the visibility
and weather conditions in which the
motorcycle is being operated.
Make sure that the headlight beam is
adjusted to illuminate the road surface
sufficiently far ahead without dazzling
oncoming traffic.
An incorrectly adjusted headlight may
impair visibility causing an accident.
Warning
Never attempt to adjust a headlight
beam when the motorcycle is in
motion.
Any attempt to adjust a headlight
beam when the motorcycle is in
motion may result in loss of control
and an accident.
Do not cover the headlight or lens with
any item likely to obstruct air flow to,
or prevent heat escaping from, the
headlight lens.
Covering the headlight lens during
operation
with
luggage,
adhesive
intended
to
alter
headlight
beam
headlight lens covers will cause the
headlight lens to overheat and distort,
causing irreparable damage to the
headlight assembly.
Damage caused by overheating is
not
considered
defect and will not be covered under
warranty.
If the headlight must be covered
during use–such as taping of the
headlight
lens
closed-course
headlight must be disconnected.
Headlight Adjustment
The headlight can only be vertically
adjusted.
1
1.
Headlight assembly mounting bolt
Maintenance
Caution
items
of
clothing,
tape,
devices
or
adjust
or
non
genuine
a
manufacturing
required
during
conditions–the
the
125
Need help?
Do you have a question about the Trident and is the answer not in the manual?
Questions and answers