LOBSTER R2B1 Instruction Manual
  1. Manuals
  2. Brands
  3. LOBSTER Manuals
  4. Rivet Tools
  5. R2B1
  6. Instruction manual

LOBSTER R2B1 Instruction Manual

Cordless riveter
Hide thumbs
Table of Contents

Advertisement

Quick Links

This machine is a dedicated tool for blind rivet for professional use.
This machine is a dedicated tool for blind rivet for professional use.
Thank you for purchasing the LOBSTER brand cordless riveter.
• Before using this machine, thoroughly read this instruction manual to ensure proper operation.
• After reading this instruction manual, keep it safe.
• When this machine becomes inoperable, refer to "Troubleshooting (page 30)."
• Note that the contents of this manual are subject to change without prior notice for
improvement.
• Unauthorized publication, duplication, and translation of this instruction manual, in part or in
whole, is prohibited.
Certified with ISO 9001 and ISO 14001
Tel: +81-72-980-1111 Fax: +81-72-980-1166
Call center
12-8 Shijo-cho, Higashi-Osaka City, Osaka
579-8053, Japan
Cordless Riveter
R2B1
Instruction Manual

Table of Contents

Introduction　 ...........................2
........................12
Preparation before Use ............13
Storage .................................27
Parts Table ...........................28
How to Order Parts ..................30
Troubleshooting........................30
Website http://www.lobtex.co.jp/
..................3
............10
...............18
...22
Ｎｏ .RCRCR2B1S02001
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the R2B1 and is the answer not in the manual?

Questions and answers

Related Manuals for LOBSTER R2B1

Summary of Contents for LOBSTER R2B1

  • Page 1: Table Of Contents

    This machine is a dedicated tool for blind rivet for professional use. This machine is a dedicated tool for blind rivet for professional use. Thank you for purchasing the LOBSTER brand cordless riveter. • Before using this machine, thoroughly read this instruction manual to ensure proper operation.

  • Page 2: Introduction

    Thank you for purchasing the LOBSTER brand cordless riveter. (hereinafter referred to as “this machine” ) ・ This machine is dedicated tool for blind rivet used to calk and tighten the LOBSTER brand rivets. This machine is not designed, manufactured, or sold for other usages.

  • Page 3: Safety Precautions

    ● Safety Precautions ● Safety Precautions ◆ Before using this machine, read all “Safety Precautions” below to fully understand them for the correct and safe use of this machine. ◆ During use of this machine, be sure to wear protective goggles. Failure to follow this instruction may cause you to get injured when the mandrel of a cut rivet springs out.
  • Page 4 ⚠ WARNING 5. If an abnormality such as smoke and an abnormal odor has occurred during use of the charger, immediately stop using it and disconnect the power plug from the receptacle. ・ Consult the store where you purchased this machine or us. Use of the charger in this condition may cause an accident or injury.
  • Page 5 ⚠ WARNING 14. Always wear personal protective equipment and protective goggles. ・ Appropriately use a dust protective mask, safety shoes, a helmet, earpieces, and others to prevent an accident or injury. 15. In replacement of a part or accessory, follow the specified procedures. ・...
  • Page 6 ⚠ WARNING 26. Do not directly connect the battery pack to the receptacle or a cigar lighter of an automobile. ・ Failure to follow this instruction may cause battery liquid leakage, electric shock, heat generation, smoke, fire, bursting, or other accident. 27.
  • Page 7 ⚠ WARNING 39. Do not direct the tip of the riveter to yourself or another person. ・ Failure to follow this instruction may lead to an injury when a rivet unexpectedly springs out. 40. Do not use this machine without attaching the mandrel collector (tank for used mandrel).
  • Page 8 ⚠ CAUTION ⚠ CAUTION 3. Wipe dust and dirt accumulated on the power plug and receptacle with a dry cloth. ・ This prevents accidents such as electric shock and fire. 4. When charging is not being carried out, remove the battery pack from the charger.
  • Page 9 ⚠ CAUTION ⚠ CAUTION 14. When you work at height, confirm that no one is beneath you. ・ Failure to follow this instruction may lead to an accident due to the falling of material, this machine, or mandrel of a cut rivet. 15.

  • Page 10: Names Of Components

    ● Names of components ● Names of components ● Machine body * The hanger is not attached Frame head nut Hanger * to the machine body at the time of shipment. Attach it Frame head as necessary. Nose piece Mandrel collector Work light (LED light) Trigger Switch Ventila...
  • Page 11 ● Battery pack Terminal part Claw Button ● Charger Ventilation hole LED lamps (green, red) Battery pack attachment part Ventilation hole ● Power cable Inlet plug Power plug...

  • Page 12: Specifications

    ● Specification ● Specification Battery capacity Standard capacity Large capacity (optional) Model number R2B1 Weight 1.7kg 2.0kg Power source 18 VDC Dimensions L307 × W76 × H260 mm L307 × W76 × H279 mm Tool stroke 25 mm Nominal output 10.5 kN...

  • Page 13: Preparation Before Use

    The product comes with the nose piece and jaw pusher unit for φ 4.8 size at the time of 公差表示方式JIS B 0024 尺度 制定日付 材質 普通公差　JIS B 0419-mH purchase. 20℃・65％・101.3kPa 寸法公差 CODE 硬度 図番 68418 RC-R2B1-A-0501-0 　　呼び区分 中級± 　　0.5以上　6以下 品名 ⚠ CAUTION 表面処理 個数 保持ノーズピース48Oユニット 　 6をこえ　30以下 　30をこえ　120以下 株式会社ロブテックス 設計...
  • Page 14 １ Mount the mandrel collector. Positively mount the mandrel collector until the claw is engaged with the machine body with a clicking sound. Machine body Claw ① ② Connection Mandrel collector ⚠ CAUTION For safety, this machine is designed to operate only when the mandrel collector is mounted.
  • Page 15 Attach the battery pack. １ Positively attach the battery pack until the claw is engaged with the machine body with a clicking sound. Battery pack Claw Machine body ⚠ CAUTION Attach the battery pack without touching the movable parts because any of the movable parts may suddenly start moving if it is touched.

  • Page 16: Procedures For Charging

    ● Procedures for charging ● Procedures for charging For charging of the battery, be sure to use the dedicated charger. １ １ Connect the power cable to the charger ① and insert the power plug into a receptacle ② . When the charger is energized, the green LED lamp slowly blinks. Charger Receptacle LED lamps...
  • Page 17 LED lamp lighting condition Contents of indication Green Blinking Standby for charging (charger is energized) (low speed) Charging in progress Blinking Completion of practical charging (completion (high speed) of 80% charging, full charging in progress) Full charging completed (charging completed) Blinking Charging is suspended due to a temperature (low speed）...

  • Page 18: Procedures For Work

    ● Work procedures ● Work procedures ● Riveting work ⚠ WARNING ・ Never look into the hole of the nose piece. Otherwise, you may get injured when a cut mandrel springs out. ・ Note that when you work with this machine oriented downward, cut mandrels may be discharged from the nose piece.
  • Page 19 １ Lightly press the tip of the riveter against the base material, and after confirming that there is no clearance from the base material and other object, pull the trigger switch. １ The body of the blind rivet is riveted to the base material. １...
  • Page 20 If about half of the capacity of the mandrel collector is filled １ with mandrels, remove the mandrel collector and dispose of the mandrels contained in it. １ １ ( Refer to Steps in “Preparation before Use” on page 13-14.) ⚠...
  • Page 21 ● Indication of remaining battery power １ When the riveter is activated, the current battery level is indicated by theillumination of the LED lamp as shown in the table below. If you press the button on the right side of the battery indicator panel at the bottom of the unit within 8 seconds after the LED lamp turns off, the remaining battery power is represented by the LED lamp turning on again.

  • Page 22: Points Of Maintenance And Inspection

    ● Points of Maintenance and Inspection ● Points of Maintenance and Inspection ● Cleaning of interior of frame head * Also refer to this section for replacement of replacement parts. When riveting has been performed for long hours, mandrel chips and dirt get accumulated in components, possibly causing a problem.
  • Page 23 １ Slide the detent ring until it contacts the rear ( ① ), loosen and remove the jaw case head ( ② •right screw). Jaw case head ① ② Detent ring ⚠ CAUTION The jaw case head can be loosened only by sliding without removing the detent ring. １...
  • Page 24 120をこえ　400以下 Lubricant 参考）単重量 23.47g ⚠ CAUTION Apply LOBSTER brand lubricant oil JO50 (separately sold, containing molybdenum disulfide grease) to the back of the jaw (cone surface) or the interior of the jaw case head (cone surface). 公差表示方式JIS B 0024 尺度...
  • Page 25 制定日付 普通公差　JIS B 0419-mH If the jaw case head freely rotates, it may be loosened or broken during use of this 20℃・65％・101.3kPa CODE 寸法公差 machine. HRC 40-45 硬度 図番 RC-R2B1 　　呼び区分 中級± 　　0.5以上　6以下 黒染め 個数 品名 回り止めリング 表面処理 　 6をこえ　30以下...
  • Page 26 O-rings fit with air blowing, etc. 番 図 度 硬 CODE 分 区 び 呼 　 　 ± 級 中 図番 68418 RC-R2B1-A-0501-0 下 以 　 上 以 　 　 名 品 数 個 理 処 面 表 下...

  • Page 27: Storage

    ● Inspection of charger Disconnect the power plug from the receptacle and check the power cable for damage and the terminal part for dirt and other attachments. ● Cleaning Wipe the machine body, battery pack, and charger with a soft cloth. Use of organic solvent such as thinner and benzine may cause defects such as deformation, discoloration, or cracks.

  • Page 28: Parts Table

    ● Parts table ● Parts table...
  • Page 29 Consumable Part name Material Code No. parts ・ Parts marked with * Frame head nut 68425 aluminum are assembled at the Frame head damper 68449 〇 rubber time of shipment. Part numbers marked Retention nose piece Unit 68415 〇 steel 4.8 * with parentheses are Retention nose piece Unit...

  • Page 30: How To Order Parts

    The smoothness of the Clean the interior of the jaw and contact surface between jaw case and apply LOBSTER brand the jaw and the jaw case lubricant to the back of the jaw. head is insufficient (bite).
  • Page 31 Phenomenon Cause Corrective action The mandrel Forgetting to release Discharge the mandrel to collapses in the mandrels. the mandrel collector before frame head. performing the following operations. A rivet cannot The rivet is not suitable for Use a rivet suitable for the plate be cut in a single the thickness of the plate thickness.
  • Page 32 Phenomenon Cause Corrective action The charging lamp The power cable is not Connect the power cable to a does not light connected. receptacle. even when the Dirt is attached at the Remove the dirt. battery pack is contact point between the Work with the power plug inserted to the charger and the battery...
  • Page 33 ＭＥＭＯ...
  • Page 34 ＭＥＭＯ...

Table of Contents