Creating Video Walls - Wyrestorm NetworkHD 100 Series Installation Manual

Creating Video Walls

Video walls are only possible with NetworkHD 210 decoder, 400 or 600 Series decoders. The decoders assigned to a
video wall must be a member of a group.
If not done already, create a group.
1.
Select a group and then press the Create VW button.
2.
Give the video wall a name and choose its size.
3.
Each video wall can have multiple scenes. Scenes dictate the configuration for a video wall – for example a 4x4 video
wall could contain a scene in which all 16 displays combine into a single image, while another scene consists of four
2x2 video walls. The possibilities are endless, and the user can switch between these scenes at the touch of a button.
To create a scene within the video wall, press the Create Scene/Layout button and name it.
4.
Note: Scene names must be alphanumeric and cannot include spaces or special characters (!@£$%^*\<+ etc.)
Once a Scene has been created, screens can be combined to create the video wall. For example, to create a 2x2
5.
image in a video wall hold the PC's CTRL button and select 4 displays.
Right click one of the selected displays and choose the option to Combine.
6.
Copyright © 2020 WyreStorm Technologies |
NetworkHD Installation Guide | 200331
WyreStorm.com
31 of 41
Outside UK: 844.280.WYRE (9973) | UK: +44 (0) 1793 230 343
Support@WyreStorm.com