Table of Contents
Advertisement
B6
Evo
Instruction Manual
[Version 1.00]
This content is subject to change.
Latest version can be downloaded
from www.skyrc.com
If you have any question about this document, please contact
SkyRC by sending a message to info@skyrc.cn
All Rights Reserved.
All specifications and figures are subject to change without notice.
Printed in China
2020.11
7504-1397-01
Advertisement
Table of Contents
Related Manuals for Skyrc iMAX B6 Evo
Summary of Contents for Skyrc iMAX B6 Evo
- Page 1 Latest version can be downloaded from www.skyrc.com If you have any question about this document, please contact SkyRC by sending a message to info@skyrc.cn All Rights Reserved. All specifications and figures are subject to change without notice. Printed in China 2020.11...
-
Page 2: Table Of Contents
To enjoy your RC activities, you really need a good helper to Specifications charge your batteries well, while SKYRC endeavors to be the one Warning and Safety Precautions you can rely on. Hard work pays off: SkyRC iMAX B6 Evo Program Flow Chart charger is finally available. Power and Battery Connection... -
Page 3: Introduction
Introduction Buttons V METER Start Charge LCD Display Process STOP START DC Input ESC/STOP Button: 11-18V Stop current process or go back to previous step/screen. DEC Button: Go through the menu or decrease the parameter value. Scroll Through INC Button: the Main Menu, Go through the menu or increase the parameter value. -
Page 4: Warning And Safety Precautions
Warning and Safety Precautions Warning and Safety Precautions Never leave the charger unattended when it is connected to power. If Make sure you know the specifications of the battery to charge or any malfunction, terminate the process at once and refer to the discharge to ensure it meets the requirements of this charger. -
Page 5: Program Flow Chart
Program Flow Chart Program Flow Chart · 06 B6 Evo B6 Evo 07 ·... -
Page 6: Power And Battery Connection
Power and Battery Connection Power and Battery Connection 2. Connecting the battery 1. Connecting to power source 12V DC Battery / Power Adapter Output DC 11-18V 1) Lithium Battery Connection Lithium Battery Pack Always remember to connect in the correct polarity. And it is highly recommended to charge your Lithium battery in balance mode for 4S LiPo Battery Pack better performance and safety reasons. -
Page 7: Glossary
Glossary Program Descriptions CHG Power = battery charging power, default charging power is Charging Program 50W. Depends on different battery type, the operation programs are different. Temp Unit = temperature unit, Celsius or Fahrenheit is selectable. Batt Operation Description Type Program Safe Temp = safe temperature. -
Page 8: Program
Program 1-8 Quick Start Guide Do not overcharge nor over-discharge batteries. B6 Evo charger minimizes program and system settings to 10 only, eight of which are preset for practical applications: Remove the battery and unplug the charging unit from the power source when not in use. -
Page 9: Lithium Battery Program (Lipo/Life/Lilon/Lihv)
Lithium Battery Program NiMH/NiCd Battery Program (LiPo/LiFe/Lilon/LiHV) ENTER to get the value flash, then click BATT PRESET: Battery No.: 9/10 INC/DEC to set Capacity protection values Click INC/DEC to select one empty program. Cap: None or off. ENTER to confirm. START/ENTER ENTER to get the value flash, then click BATT PRESET:... -
Page 10: Pb Lead-Acid Battery Program
NiMH/NiCd Battery Program Pb Lead-acid Battery Program Battery No.: 9/10 Click INC/DEC to select one empty program. Set the Discharge/Charge or Charge/Discharge None BATT PRESET: D&C cycle: Cycles. START/ENTER MODE: BATT PRESET: Batt Preset Set the Trickle Current or off. Trickle: START/ENTER BATT PRESET:... -
Page 11: Dc / Dc Converter
DC / DC Converter DC / DC Converter To activate and enjoy this function, follow below steps: Versatile With the Addition of AGM and Cold Modes Battery No.: 9/10 The juice box comes with the charging algorithm for the most Click INC/DEC to select one empty program. -
Page 12: Controlling The Charger Using The App
Android. Revo 15:53 Download to install SkyCharger, connect SkyRC Bluetooth Dongle to B6 Evo, then enable Bluetooth on your smart devices, and launch the Balance Charge app, search for Bluetooth. to connect. When the device named [B-... -
Page 13: User Calibration
B6 Evo enables the user to check the overall battery voltage and Warning: It is highly recommended NOT to do calibration unless each cell's voltage. necessary. SKYRC will not be liable for the consequences caused by calibration. Please connect the battery to the charger with both the main socket and balance lead connected. -
Page 14: System Setting
System Setting Warning and Error Message In case of an error, the screen will display the warning and emit an It will be operated with the default value of the essential user settings audible sound. when it is powered on for the first time. The screen displays the following information in sequence, and the user can change the value E R R O R : of the parameter on each screen. -
Page 15: Faq
The Set Contains The charge current cannot be set at 6A. THESETCONTAINS There may be 2 reasons: 1. SKYRC B6 Evo Charger 1) Default charge power is 50W, please visit system setting to change the power to 60W. 2. DC Input Cable 3. -
Page 16: Conformity Declaration
Conformity Declaration Regulatory Information SkyRC B6 Evo meets all relevant and mandatory EC directives and FCC Note: FCC Part 15 Subpart B. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:... -
Page 17: Commonly Used Terms
This charger is designed and approved exclusively for use with the types of (capacity limit) is reached. The charge process switches from a high battery stated in this Instruction Manual. SkyRC accepts no liability of any current to a low maintenance rate (trickle charge) at this point. From kind if the charger is used for any purpose other than that stated.
Need help?
Do you have a question about the iMAX B6 Evo and is the answer not in the manual?
Questions and answers