HealTech Electronics GIpro w/ATRE User Manual

Electronic gear indicator with advanced timing retard eliminator for triumph rocket iii (2004-2010)

Advertisement

Quick Links

- Electronic Gear Indicator with Advanced Timing Retard Eliminator -
Specifically designed for Triumph Rocket

1. Foreword

Congratulations on your purchase of a GIpro unit.
The GIpro from HealTech Electronics Ltd. is not only the most advanced gear indicator on
the market, but also the best TRE device available for selected Triumph motorcycles.
This product will fit Triumph motorcycles with Gear Position Sensor (GPS).

2. Warranty

To ensure trouble-free operation from the start, all GIpro units have been extensively tested
prior to shipment.
Should you not be entirely satisfied for any reason, our dealers are offering a 30-day
money-back guarantee
Furthermore the product is covered by our 2-year replacement guarantee from the date of
purchase.
(The unit should not be damaged or subjected to over-voltage.)
Please contact us in warranty issues at support@healtech-electronics.com regardless of
the place of purchase.

3. Electrical Specifications

- Supply voltage: +9V to +16V
- Reverse polarity and transient protection on all leads
- Supply current in stand-by: 4 mA @ 12V
- Maximum supply current: 85 mA @ 12V
http://www.healtech-electronics.com
GI
pro
w/ATRE
User's Guide
(all parts must be returned in original condition for full refund)
III (2004-2010)
.
- 1 -

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GIpro w/ATRE and is the answer not in the manual?

Questions and answers

Summary of Contents for HealTech Electronics GIpro w/ATRE

  • Page 1 1. Foreword Congratulations on your purchase of a GIpro unit. The GIpro from HealTech Electronics Ltd. is not only the most advanced gear indicator on the market, but also the best TRE device available for selected Triumph motorcycles. This product will fit Triumph motorcycles with Gear Position Sensor (GPS).
  • Page 2 4. List of Features Fast and accurate Instant and accurate indication of selected gear for added control and safety. It’s not like competing products that all suffer from lag and incorrect readings. Quick installation Plug-n-go wiring harness, easy to mount display Complete installation can be done in about 30 minutes.
  • Page 3 5. How to’s 5.1. Activating the display When the ignition switch is ON and the engine switch is in RUN position, the display will indicate the actual gear selected. 5.2. Reviewing and Changing TRE mode Activate the display (refer to section 5.1) Press and release the button.
  • Page 4 5.4. Resetting the unit The Reset will clear the following data, and factory defaults will be restored: - Gear Positions recorded - TRE mode (default is Normal mode, i.e. TRE off) - Auto Brightness Control Sensitivity Level (default is 4) Activate the display (refer to section 5.1).

Table of Contents