Advertisement
Quick Links
This unit generates camera identification information and contact closure messages for display on a monitor.
I
NSTALLATION
See Figure 1 and perform the following:
1)
Connect the video input cable to the
unit's video input BNC connector ( ).
2)
Connect the video output cable to the
unit's video output BNC connector ( ).
3)
Connect the provided power supply to
connectors 1 and 2 of the unit's
terminal strip ( ).
P
ROGRAMMING
The generator provides five programming mode screens for entering alphanumeric characters. The first screen is labeled
Default. The remaining four screens are labeled Contact 1, Contact 2, Contact 3, and Contact 4. See Figure 2.
Note: The screen labels will appear only when you are in programming mode. When the unit is not in programming mode, the text entered on the
Default screen is displayed continuously. The text entered on each of the contact screens is displayed only when an associated contact closure occurs.
When more than one contact closure occurs simultaneously, the text for the lowest numbered contact will be displayed.
Figure 2. Programming mode screens
1037482C / February 2003
Figure 1. Cable connections
Technical Support: 800-469-1676
KTS-55 Alphanumeric Message Generator
1
Advertisement
Related Manuals for GE Interlogix Kalatel KTS-55
Summary of Contents for GE Interlogix Kalatel KTS-55
- Page 1 KTS-55 Alphanumeric Message Generator This unit generates camera identification information and contact closure messages for display on a monitor. NSTALLATION See Figure 1 and perform the following: Connect the video input cable to the unit’s video input BNC connector ( ). Connect the video output cable to the unit’s video output BNC connector ( ).
- Page 2 The Confirm Erase screen ↓ ↑ appears. To erase the unit’s memory, press . The screen will sequence through the numbers 0 through 4, then advance to the normal operating display. 1037482C / February 2003 © 2003 Kalatel, a GE Interlogix company...