Specifications - L3 Aviation Products GH-3100 Installation And Operation Manual

1.3 SPECIFICATIONS

1.3.1 GH-3100
PART NUMBER
CERTIFICATION:
RTCA COMPLIANCE:
see environmental qualification
form in Appendix B.
EUROCAE COMPLIANCE:
see environmental qualification
form in Appendix B.
SIZE:
WEIGHT:
POWER REQUIREMENTS:
CIRCUIT BREAKER:
CONFIGURATION:
OPERATING TEMPERATURE:
STORAGE TEMPERATURE:
MAXIMUM ALTITUDE:
AIR SPEED AND ALTITUDE
MAXIMUM DISPLAY LIMITS:
OPERATION REQUIREMENTS:
CONNECTOR TYPE:
SCHEDULED MAINTENANCE
REPAIRABILITY:
SERVICE LIFE:
Do not use this information for acceptance verification for the GH
indicator. Verification tests are located in the Installation Checkout
section of this manual.
Page 1-6
March 30, 2017
GH-3100
Installation & Operation Manual
501-1860-() (GH-3100)
USA (FAA) and Europe (EASA)
See paragraph 1.3.1.1 and 1.3.1.2 for information.
Environmental Category: DO-160D
Software Category: DO-178B, criticality Level B & C
Other: DO-187, DO-189, DO-192, DO-195, DO-196, And DO-208.
ED-14E, ED-22B, ED-46B, ED-47B, ED-54
Case shall be 3 ATI in accordance with ARINC Specification 408A.
Length (with knob): 12.29 inches [31.22 cm]
Bezel Width and Height: 3.30 inches [8.38 cm]
4.0 Lbs. (1.81 Kg) maximum.
Starting: (warm up) 50.0 watts at +28.0 Vdc, continues for first five minutes of
operation.
Running: (with heaters, fan, and thermal electrical cooler off) shall not exceed 23.5
watts at 28 Vdc input.
Lighting Power: 0.708 watts at 5.0 Vac or Vdc or 0.9 watts at 28.0 Vac or Vdc.
3.0A recommended.
See Table 1-2.
-40° to +70°C (-40° to +158°F)
-55° to +85°C (-67° to +185°F)
25,000 ft.
Mach Range
Altitude Range
Indicated Airspeed Range
DCM-3100 installed at J2 is required to operate.
J1 (p/n 563-1113-01)
mates with MS3116F18-32S (solder contacts)
or MS3126F18-32S (front release crimp contacts)
or MS3476L18-32S (rear release crimp contact).
with M85049/52S18W strain relief.
J2 (p/n 563-1013-21)
Interface port to the DCM-3100 and diagnostic port.
Static Pressure Port : IAW MS33649-05
Total Pressure Port: IAW MS33649-04
No scheduled maintenance interval applicable. Subject to bi-annual requirements of
FAA document CFR FAR Part 91.411.
Repairs will be performed at the factory
The indicator has unlimited service life
CAUTION
General Information
0.41 to 0.99
–1,000 to +55,000 feet
0 to 450 knots
TP-559
Revision K