Factory Reset Button; Package Contents - Meraki Cisco MS425 Series Installation Manual

White
Rainbow
Off
3 Switch Port LEDs Off
Solid orange
Solid green

Factory Reset Button

If the button is pressed and held for at least 10 seconds and then released, the switch will reboot and be restored to its original factory settings by deleting all
configuration information stored on the unit.
Insert a paper clip if a restore is required.
• A brief, momentary press: To delete a downloaded configuration and reboot.
• Press and hold for more than 10 sec: To force the unit into a full factory restore.
Back Panel
Function
Fan
Power (PSU)
Management Port
Equipment is to be used only in a restricted access location and installed/operated only by trained service personnel.

Package contents

In addition to the MS switch, the following are provided (mounting kit provided with 1U models only):
Switch is fully operational and connected to the Meraki cloud
Switch is booting, searching for uplink to Meraki Cloud
Switch does not have power
No client connected
1000 Mbps (1Gbps)
10,000 Mbps (10Gbps)
LED Status Meaning
Orange One or more of the system fans has malfunctioned or is missing
Orange One of the system PSUs (power supplies) has malfunctioned or is missing
Green Connected, used for easy access to the local status page
3