Oil Change Reset; Instrument Cluster Display Menu Items - Jeep RENEGADE 2021 Owner's Manual

O C R
IL HANGE ESET
Oil Change Due
Your vehicle is equipped with an engine oil
change indicator system. The "Oil Change Due"
message will display in the instrument cluster
display for five seconds after a single chime has
sounded to indicate the next scheduled oil
change interval. The engine oil change indicator
system is duty cycle based, which means the
engine oil change interval may fluctuate,
dependent upon your personal driving style.
Unless reset, this message will continue to
display each time the ignition is cycled to the
ON or RUN position. To reset the oil change
indicator system (after performing the
scheduled maintenance), refer to the following
procedure:
1. Without pushing the brake pedal, push the
ENGINE START/STOP button and cycle the
ignition to the ON/RUN position (do not
start the engine).
2. Fully push the accelerator pedal, slowly,
three times within 10 seconds.
3. Without pushing the brake pedal, push the
ENGINE START/STOP button once to return
the ignition to the OFF/LOCK position.
NOTE:
If the indicator message illuminates when you
start the vehicle, the oil change indicator
system did not reset. See an authorized dealer
to have the oil life reset.
I C D
NSTRUMENT LUSTER ISPLAY
I
TEMS
NOTE:
The instrument cluster display menu items
display in the center of the instrument cluster.
Menu items may vary depending on your vehicle
features.
Speedometer
Push and release the up or down
button until the speedometer is displayed in the
instrument cluster display. Push and release
the OK button to toggle units (mph or km/h) of
the speedometer.
GETTING TO KNOW YOUR INSTRUMENT PANEL
Vehicle Info
Push and release the up
button until "Vehicle Info" is highlighted in the
instrument cluster display. Push and release
the right arrow button and Coolant Temp will
be displayed. Push the right
button to scroll through the following
information displays:
M Tire Pressure — View the information relating
ENU 
to the Tire Pressure Monitoring System (If
Equipped).
Coolant Temperature — View the engine

coolant temperature.
Trans Temperature — View the trans oil

temperature.
Oil Temperature — View the oil temperature.

Battery Voltage — View the voltage value
arrow

(state of charge) of the battery.
Service — View the service status message(s)

(If Equipped).
77
or down arrow
or left arrow
3