CITROEN C2 Manual page 89

Hide thumbs Also See for C2:
Table of Contents

Advertisement

ISOFIX anchoring points and
the ISOFIX fastening system
The rear seats of your vehicle are
equipped with ISOFIX anchoring
located between the backrest and
apart.
ISOFIX child seats are equipped
system is intended for children
weighing up to 18 kg.
Incorrect installation of a child seat
in a vehicle compromises protec-
tion of the child in the event of a col-
lision. The ISOFIX system enables
you to minimise the risks posed by
tening system gives you a conven-
child seat in your vehicle.
C H I L D R E S T R A I N T S
The ISOFIX child seats approved (1) for your vehicle are:
The KIDDY ISOFIX (1):
This is marketed in the CITROËN network. It can be installed "rear-facing"
Advice on installing your KIDDY ISOFIX child seat:
When this seat is installed "forward-facing", the vehicle front seat should
be adjusted to an intermediate fore/aft position, backrest upright.
If "rear-facing", the shell of the child seat should be in contact with the
backrest of the vehicle front seat.
that are individually adjustable.
The RÖMER Duo ISOFIX (1):
only in the "forward-facing" position. The vehicle's corresponding front seat
should be adjusted so that the child's feet are not touching its backrest (slide
the rear seat as far rearwards as possible). The use of the top belt, called
Top Tether, is not necessary.
These child seats can also be installed in seat positions that are not equipped
with ISOFIX anchorages. In this case, they must be secured to the vehicle
seat by means of the vehicle seat belt.
approved for your vehicle.
III

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C2 and is the answer not in the manual?

Questions and answers

Dulce
March 13, 2025

Como acertar o relógio do C2

1 comments:
Mr. Anderson
March 13, 2025

To set the clock on a Citroen C2 (2009 model):

1. Press the menu button to access the main menu.
2. Navigate to the display settings.
3. Use the OK button to enter the time/date settings.
4. Adjust the time and date as needed using the OK button.
5. Once set, press the Escape button to return to the main screen.

If your model does not have menu buttons near the display, the time settings might need to be adjusted through the stereo system.

This answer is automatically generated

Table of Contents

Save PDF