Advertisement
Table of Contents
- 1 Where Is the Default Combination Located?
- 2 Why Does My Lock Open with “NO” Combination?
- 3 I Reset My Combination. Why Doesn’t My Shackle Stay Locked?
- 4 I Forgot My Combination. Can You Open My Lock for Me?
- 5 Why Doesn’t My Lock Work When Using It Outdoors?
- 6 Why Doesn’t My Lock Work When Using It for Breakout EDU?
- Download this manual
Master Lock 1500iD Speed Dial™ Directional Dial Combination Padlock
Question: Where is the default combination located?
Answer:
The preset combination will be a series of four arrows which will look like the example code below (the
preset combination is different for each lock):
←
↑
→
↓
The preset combination is listed in the upper right hand corner of the instructions that were in the cavity
on the back of the package, near the base. Note: You will have to cut open the package to remove the
instructions and preset combination.
Question: Why is my directional password no longer working for my set combination?
Answer:
The 1500iD lock is sensitive and reads all movements; certain types of touch seem to work better for
some users to help ensure the correct combination is entered. Please try these suggestions:
1. Give the shackle two quick squeezes to "clear" it rather than two slow, deliberate squeezes.
2. In a quick manner, allow the button to move back to center mostly on its own, without over-guiding
it.
3. Don't allow the button to bounce past the center position or it will read the adjacent position as part
of the entry.
Question: Why does my lock open with "NO" combination?
Answer:
It may be possible that the lock is set to "no" combination. Please try resetting the lock again by
following the instructions below:
1. Place lock in the open position.
2. On the back of the lock, slide the reset lever into the "up" position.
3. Insert the shackle into the lock and squeeze firmly twice to "clear" it.
4. Pull up on the shackle to open the lock.
5. Enter your new combination.
6. On the back of the lock, slide the reset lever into the "down" position.
Advertisement
Table of Contents
Related Manuals for Master Lock Speed Dial 1500iD
Summary of Contents for Master Lock Speed Dial 1500iD
- Page 1 Master Lock 1500iD Speed Dial™ Directional Dial Combination Padlock Question: Where is the default combination located? Answer: The preset combination will be a series of four arrows which will look like the example code below (the preset combination is different for each lock): ←...
- Page 2 Suggested uses include cabinets, indoor storage lockers, school, employee and athletic lockers. We appreciate your feedback on the Master Lock Speed Dial and are sorry to hear of the difficulty you have experienced with these locks. The directional interface is very popular as it solves many challenges...
- Page 3 Question: Why doesn’t my lock work when using it for Breakout EDU? Answer: This lock includes a more complex resetting mechanism supported by many more components and those added variables, and necessary steps, occasionally drive an increase for potential user error if they miss a step when changing the combination.
Need help?
Do you have a question about the Speed Dial 1500iD and is the answer not in the manual?
Questions and answers
My directional master lock will not open.
The Master Lock Speed Dial 1500iD may not open because it is sensitive to movement and requires precise input. Try these steps to ensure the correct combination is entered:
1. Squeeze the shackle twice quickly to "clear" the lock.
2. Allow the button to move back to the center mostly on its own without over-guiding it.
3. Avoid letting the button bounce past the center position, as this may cause the lock to misread the input.
If the issue persists, verify that the correct directional combination is being used.
This answer is automatically generated