Maintenance and Adjustment
Clutch Adjustment
To adjust the clutch:
•
Turn the adjuster sleeve until the
correct amount of clutch lever free
play is achieved.
•
Check that there is 2 - 3 mm clutch
lever free play at the lever.
•
If there is an incorrect amount of
free play, adjustments must be
made.
1
2
2 - 3 mm
1.
Adjuster sleeve (locknut fully released)
2.
Correct clearance 2-3 mm
3.
Clutch lever
110
If correct adjustment cannot be made
using the lever adjuster, use the cable
adjuster at the lower end of the cable.
•
Loosen the adjuster lock nut.
•
Turn the outer cable adjuster to give
2 - 3 mm of free play at the clutch
lever.
•
Tighten the lock nut to 3.5 Nm.
1.
Adjuster nut
3
2.
Lock nut
3.
Clutch cable
1
2
3
Need help?
Do you have a question about the Bonneville T100 Series and is the answer not in the manual?
Questions and answers