Status Registers & Result Codes; S-Register Descriptions; Basic S-Registers "Atsn=X - ZyXEL Communications U-336S User Manual

9
Status Registers & Result
Codes

S-Register Descriptions

In most bit-mapped S-registers, the default bit value is 0. Non-0 default
values are followed by an asterisk. In some cases, default values are
shown in the reference column preceded by +. Some bits are reserved
for factory use and should not be changed.

Basic S-Registers "ATSn=x"

Command Function & Description
S0=
S1=
S2=
S3=
S4=
S5=
S6=
Set the number of rings on which the modem
will answer. 0 value disable auto-answer
Counts and stores number of rings from an
incoming call
Define escape code character, default '+' (43
dec.). A value of 128-255 disables the escape
code
Define ASCII Carriage Return
Define ASCII Line Feed
Define ASCII Backspace. A value of 128-255
disables the Backspace key's delete function
Set the number of seconds the modem waits
before dialing if 'X0' or 'X1' is selected. If a
setting of 'X2' to 'X7' is selected, the modem
will dial as soon as it detects a dial tone. This
Status Registers & Result Codes 105
+Ref.
+000
+000
+043
+013
+010
+008
+003